Fundamentals of Heat and Mass Transfer
7th Edition
ISBN: 9780470501979
Author: Frank P. Incropera, David P. DeWitt, Theodore L. Bergman, Adrienne S. Lavine
Publisher: Wiley, John & Sons, Incorporated
expand_more
expand_more
format_list_bulleted
Concept explainers
Textbook Question
Chapter 4, Problem 4.23P
A pipeline, used for the transport of crude oil, is buried in the earth such that its centerline is a distance of 1.5 m below the surface. The pipe has an outer diameter of 0.5m and is insulated with a layer of cellular glass 100 mm thick. What is the heat loss per unit length of pipe when heated oil at 120°C flows through the pipe and the surface of the earth is at a temperature of 0°C?
Expert Solution & Answer
Want to see the full answer?
Check out a sample textbook solutionStudents have asked these similar questions
A wall in a house contains a single window. The window consists of a single pane of glass whose area is 0.13 m2 and whose thickness is 8 mm. Treat the wall as a slab of the insulating material Styrofoam whose area and thickness are 19 m2 and 0.10 m, respectively. Heat is lost via conduction through the wall and the window. The temperature difference between the inside and outside is the same for the wall and the window. Of the total heat lost by the wall and the window, what is the percentage lost by the window?
20-m pipe has an outside diameter of 50 mm. Pipe is insulated with a layer of
asbestos, then followed by a layer of cork. Inside and outside diameter of the
cork is 77 mm and 80 mm, respectively. If the temperature drop from pipe to
cork is 1165°C, calculate the inside diameter of the pipe (mm). The rate of the
heat transfer is 8778 W. The thermal conductivity of steam pipe, asbestos and
cork are 0.045 kW/m-K, 0.058 W/m-K and 0.043 W/m-K respectively.
An industrial cold room has four 200 mm thick walls made of concrete. The walls are insulated on the outside with a layer of foam 60 mm thick. Cladding with a thickness of 15 mm protects the foam on the outside from the elements. The composite wall surface temperatures are –3 °C on the inside and 18 °C on the outside of the room respectively. The thermal conductivities of concrete, foam and cladding are 0.75, 0.35 and 0.5 W/m K respectively.a) Assuming perfect thermal contact between the layers of the composite walls, draw the typical temperature distribution across the layers and determine the heat energy gained per hour through all 4 walls of the room with a total surface area of 20 m^2. What does this heat energy represent in terms of the refrigeration system of the cold room? b) Without any calculations, how would you expect the internal and external air temperatures to be relative to the wall surface temperatures?c) How do you expect the heat gain calculated in question 1a) above…
Chapter 4 Solutions
Fundamentals of Heat and Mass Transfer
Ch. 4 - In the method of separation of variables (Section...Ch. 4 - A two-dimensional rectangular plate is subjected...Ch. 4 - Consider the two-dimensional rectangular plate of...Ch. 4 - A two-dimensional rectangular plate is subjected...Ch. 4 - A two-dimensional rectangular plate is subjected...Ch. 4 - Using the thermal resistance relations developed...Ch. 4 - Free convection heat transfer is sometimes...Ch. 4 - Consider Problem 4.5 for the case where the plate...Ch. 4 - Prob. 4.9PCh. 4 - Based on the dimensionless conduction heat rates...
Ch. 4 - Determine the heat transfer rate between two...Ch. 4 - A two-dimensional object is subjected to...Ch. 4 - An electrical heater 100 mm long and 5 mm in...Ch. 4 - Two parallel pipelines spaced 0.5 m apart are...Ch. 4 - A small water droplet of diameter D=100m and...Ch. 4 - A tube of diameter 50 mm having a surface...Ch. 4 - Pressurized steam at 450K flows through a long,...Ch. 4 - The temperature distribution in laser-irradiated...Ch. 4 - Hot water at 85°C flows through a thin-walled...Ch. 4 - A furnace of cubical shape, with external...Ch. 4 - Laser beams are used to thermally process...Ch. 4 - A double-glazed window consists of two sheets of...Ch. 4 - A pipeline, used for the transport of crude oil,...Ch. 4 - A long power transmission cable is buried at a...Ch. 4 - A small device is used to measure the surface...Ch. 4 - A cubical glass melting furnace has exterior...Ch. 4 - An aluminum heat sink (k=240W/mK), used to cool an...Ch. 4 - Hot water is transported from a cogeneration power...Ch. 4 - A long constantan wire of 1-mm diameter is butt...Ch. 4 - A hole of diameter D=0.25m is drilled through the...Ch. 4 - In Chapter 3 we that, whenever fins are attached...Ch. 4 - An igloo is built in the shape of a hemisphere,...Ch. 4 - Prob. 4.34PCh. 4 - An electronic device, in the form of a disk 20 mm...Ch. 4 - The elemental unit of an air heater consists of a...Ch. 4 - Prob. 4.37PCh. 4 - Prob. 4.38PCh. 4 - Prob. 4.39PCh. 4 - Prob. 4.40PCh. 4 - One of the strengths of numerical methods is their...Ch. 4 - Determine expressionsfor...Ch. 4 - Consider heat transfer in a one-dimensional...Ch. 4 - In a two-dimensional cylindrical configuration,...Ch. 4 - Upper and lower surfaces of a bus bar are...Ch. 4 - Derive the nodal finite-difference equations for...Ch. 4 - Consider the nodal point 0 located on the boundary...Ch. 4 - Prob. 4.48PCh. 4 - Prob. 4.49PCh. 4 - Consider the network for a two-dimensional system...Ch. 4 - An ancient myth describes how a wooden ship was...Ch. 4 - Consider the square channel shown in the sketch...Ch. 4 - A long conducting rod of rectangular cross section...Ch. 4 - A flue passing hot exhaust gases has a square...Ch. 4 - Steady-state temperatures (K) at three nodal...Ch. 4 - Functionally graded materials are intentionally...Ch. 4 - Steady-state temperatures at selected nodal points...Ch. 4 - Consider an aluminum heat sink (k=240W/mK), such...Ch. 4 - Conduction within relatively complex geometries...Ch. 4 - Prob. 4.60PCh. 4 - The steady-state temperatures (°C) associated with...Ch. 4 - A steady-state, finite-difference analysis has...Ch. 4 - Prob. 4.63PCh. 4 - Prob. 4.64PCh. 4 - Consider a two-dimensional. straight triangular...Ch. 4 - A common arrangement for heating a large surface...Ch. 4 - A long, solid cylinder of diameter D=25mm is...Ch. 4 - Consider Problem 4.69. An engineer desires to...Ch. 4 - Prob. 4.71PCh. 4 - Prob. 4.72PCh. 4 - Prob. 4.73PCh. 4 - Refer to the two-dimensional rectangular plate of...Ch. 4 - The shape factor for conduction through the edge...Ch. 4 - Prob. 4.77PCh. 4 - A simplified representation for cooling in very...Ch. 4 - Prob. 4.84PCh. 4 - A long trapezoidal bar is subjected to uniform...Ch. 4 - Consider the system of Problem 4.54. The interior...Ch. 4 - A long furnace. constructed from refractory brick...Ch. 4 - A hot pipe is embedded eccentrically as shown in a...Ch. 4 - A hot liquid flows along a V-groove in a solid...Ch. 4 - Prob. 4S.5PCh. 4 - Hollow prismatic bars fabricated from plain carbon...
Knowledge Booster
Learn more about
Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.Similar questions
- 1.1 On a cold winter day, the outer surface of a 0.2-m-thick concrete wall of a warehouse is exposed to temperature of –5°C, while the inner surface is kept at 20°C. The thermal conductivity of the concrete is 1.2 W/m K. Determine the heat loss through the wall, which is 10-m long and 3-m high. Problem 1.1arrow_forwardAn industrial cold room has four 200 mm thick walls made of concrete. The walls are insulated on the outside with a layer of foam 60 mm thick. Cladding with a thickness of 15 mm protects the foam on the outside from the elements. The composite wall surface temperatures are –3 °C on the inside and 18 °C on the outside of the room respectively. The thermal conductivities of concrete, foam and cladding are 0.75, 0.35 and 0.5 W/m K respectively. Without any calculations, how would you expect the internal and external air temperatures to be relative to the wall surface temperatures? Explain your answer.arrow_forwardThe window in my office is 2 metres by 3 metres. Assuming all other walls are well insulated and that heat loss only occurs through the window, calculate what size of heater I need in my office to maintain the temperature, if the inside surface of the glass is at 11 °C and the outside surface at 6 °C. Sketch the temperature profile through the glass. Data: Thickness of glass = 4 mm Thermal conductivity of glass 0.78 W/m K.arrow_forward
- QUESTION 3 A steel pipe 150mm external diameter conveys steam at a temperature of 260°C and is covered by two layers of lagging, each 50mm thick. The thermal conductivity coefficient of the inside layer of lagging is 0.0865W/mK while that of the outside layer is 0.0952W/mK. The outside surface temperature of the steel pipe can be taken as being the same temperature of the steam. The ambient temperature is 27°C and the heat transfer coefficient of the outside surface is 15W/m2K. Calculate: 3.1 the heat lost/hr for a pipe length of 30m;arrow_forwardYou want to figure out whether it is safe to touch the outside surface of the pipe in question. Here are the details: "A stainless steel pipe is carrying hot water to a test facility. The inside surface of the pipe is at a temperature of 70°C and the inner radius is 0.2 m. The thickness of the steel pipe is 12 mm. It is exposed to air at 30°C on the outside. The average convection coefficient of air over the pipe is 15 W/m².°C. Thermal conductivity of steel is 54 W/m.°C. Negelect radiation. Consider steady conditions." Calculate, assuming a 1-m long pipe segmen, the temperature of the outside surface of the pipe.arrow_forwardOne vessel having a carbon-steel wall of thickness 5 mm carrying saturated steam and water at 423K. The vessel is insulated with magnesia of thickness 50 mm. If the ambient air temperature is 321 K, determine the heat loss from the vessel. Given: i. thermal conductivity of carbon steel is 52 W/m.K ii. thermal conductivity of magnesia is 0.5 W/m.K iii. surface coefficient of insulation surface is 3 W/m2.Karrow_forward
- Question 1: A glass window of width W = 1 m and height H = 2 m is 5 mm thick and has a thermal conductivity of kg =1.4 W/m.K. If the inner and outer surface temperatures of the glass are 15 oC and -20 oC, respectively, on a cold winter day, what is the rate of heat loss through the glass? To reduce heat loss through windows, it is customary to use a double pane construction in which adjoining panes are separated by an air space. If the spacing is 10 mm and the glass surfaces in contact with the air have temperatures of 20 oC and -15 oC, what is the rate of heat loss from a 1 m x 2 m window? The thermal conductivity of air is ka = 0.024 W/m.K.arrow_forwardInconel refers to a class of nickel-chromium-based superalloys that are used in high-temperature applications, such as gas turbine blades. For further improvement in the performance of gas turbine engines, the outer blade surface is coated with ceramic-based thermal barrier coating (TBC). A flat Inconel plate with a thickness of 12 mm is coated with a layer of TBC with a thickness of 300 um on its surface. At the interface between the Inconel® and the TBC, the thermal contact conductance is 3500 W/m2 K. The thermal conductivities of the Inconel and the TBC are 25 W/m K and 1.5 W/m-K, respectively. The plate is in a surrounding of hot combustion gasses at 1500'C, and the convection heat transfer coefficient is 750 W/m4 K. Determine the temperature at the mid-plane of the Inconel plate if the outer surface temperature is 1175°C. The temperature is 7"C.arrow_forwardQuestion 1: A glass window of width W = 1 m and height H = 2m is 5 mm thick and has a thermal conductivity of kg =1.4 W/m.K. If the inner and outer surface temperatures of the glass are 15 °C and -20 C, respectively, on a cold winter day, what is the rate of heat loss through the glass? To reduce heat loss through windows, it is customary to use a double pane construction in which adjoining panes are separated by an air space. If the spacing is 10 mm and the glass surfaces in contact with the air have temperatures of (last two digit of your Registration number) °C and -15 °C, what is the rate of heat loss from a 1 mx2mwindow? The thermal conductivity of air is ka = 0.024 W/m.K.arrow_forward
- A cold storage room is constructed of an inner layer of 12.7mm of pine, a middle inner of 101.6mm of cork board, and an outer layer of 76.2mm of concrete. The wall surface temperature is 255.4 K inside the cold room and 297.1 k at the outside surface of the concrete. Thermal conductivity of pine is 0.151; corkboard 0.0433; concrete 0.762W/m-K. Calculate the heat loss in W for 1m^2 surface area.arrow_forwarda hollow styrofoam cubical box, which is perfectly insulated at the bottom, has a length of 2-m on each side and an inside surface temperature of -10 C. What should be the conduction thermal resistance at the top surface of the box in K/w if the heat load inside the box must be kept less than or equal to 500 W when the outside surface temperature of the box is 35 C? the thermal Conductivity of styrofoam is 0.030 W/m karrow_forwardHeat Transfer Lesson The water will be heated from 10 (Degrees centigrade oC) to 90 (Degrees centigrade oC) while flowing through a smooth pipe with 1.5 cm inner diameter and 7 meters length.The entire surface of the pipe is equipped with an electric heater, which ensures uniform heating throughout.The outer surface of the heater is well insulated and therefore all heat generated in the heater in continuous operation is transferred to the water in the pipe.If the system provides 6 Liter / minute flow rate of hot water. (Thermophysical properties of water at 50 oC:ρ = 988 m3/kg, k= 0.6305 W/m oC, cp=4181 J/kg oC, Pr=3.628, μ= 0.0005471 kg/m.s ) a)Find the power of the resistance heater [W]. b)Calculate the inner surface temperature [oC] of the pipe at the outlet. c)Find the pressure drop [Pa]. d)Find the pump power [W] required to overcome this pressure drop.arrow_forward
arrow_back_ios
SEE MORE QUESTIONS
arrow_forward_ios
Recommended textbooks for you
- Principles of Heat Transfer (Activate Learning wi...Mechanical EngineeringISBN:9781305387102Author:Kreith, Frank; Manglik, Raj M.Publisher:Cengage Learning
Principles of Heat Transfer (Activate Learning wi...
Mechanical Engineering
ISBN:9781305387102
Author:Kreith, Frank; Manglik, Raj M.
Publisher:Cengage Learning
Understanding Conduction and the Heat Equation; Author: The Efficient Engineer;https://www.youtube.com/watch?v=6jQsLAqrZGQ;License: Standard youtube license