A uniform horizontal strut weighs 290.0 N. One end of the strut is attached to a hinged support at the wall, and the other end of the strut is attachedby a cable attached between the end of the strut and the wall. Assume that the entire weight of the sign is attached at the very end of the strut.a sign that weighs 150.0 N. The strut is also supported30°RestaurantFind the tension in the cable (in N).Find the force (in N) at the hinge of the strut. (Give the direction in degrees counterclockwise from the +x-axis. Assume that the +x-axis is to the right.)magnitudedirection°counterclockwise from the +x-axis

Answered: Image /qna-images/answer/893c6223-2175-48ce-975b-b8692df21922.jpg

A uniform horizontal strut weighs 290.0 N. One end of the strut is attached to a hinged support at the wall, and the other end of the strut is attached to a sign that weighs 150.0 N. The strut is also supported by a cable attached between the end of the strut and the wall. Assume that the entire weight of the sign is attached at the very end of the strut. 30° Restaurant Find the tension in the cable (in N). Find the force (in N) at the hinge of the strut. (Give the direction in degrees counterclockwise from the +x-axis. Assume that the +x-axis is to the right.) magnitude direction °counterclockwise from the +x-axis

A uniform horizontal strut weighs 290.0 N. One end of the strut is attached to a hinged support at the wall, and the other end of the strut is attached to a sign that weighs 150.0 N. The strut is also supported by a cable attached between the end of the strut and the wall. Assume that the entire weight of the sign is attached at the very end of the strut. 30° Restaurant Find the tension in the cable (in N). Find the force (in N) at the hinge of the strut. (Give the direction in degrees counterclockwise from the +x-axis. Assume that the +x-axis is to the right.) magnitude direction °counterclockwise from the +x-axis

University Physics Volume 1

18th Edition

ISBN:9781938168277

Author:William Moebs, Samuel J. Ling, Jeff Sanny

Publisher:William Moebs, Samuel J. Ling, Jeff Sanny

Chapter12: Static Equilibrium And Elasticity

Section: Chapter Questions

Problem 38P: A uniform horizontal strut weighs 400.0 N. One end of the strut is attached to a hinged support the...

See similar textbooks

Similar questions

Find the magnitude of the tension in each supporting cable shown below. In each case, the weight of the suspended body is 100.0 N and the masses of the cables are negligible.
Check Your Understanding A 400.0-N sign hangs from the end of a uniform strut. The strut is 4.0 m long and weighs 600.0 N. The strut is supported by a hinge at the wall and by a cable whose other end is tied to the wall at a point 3.0 m above the left end of the strut. Find the tension in the supporting cable and the force of the hinge on the strut.
A wooden door 2.1 m high and 0.90 m wide is hung by two hinges 1.8 m apart. The lower hinge is 15 cm above the bottom of the door. The center of mass of the door is at its geometric center, and the weight of the door is 260 N, which is supported equally by both hinges. Find the horizontal force exerted by each hinge on the door.
a 400.0-n sign hangs from the end of the uniform strut. the strut is 4.0 m long and weighs 600.0 N. the struts is supported by a hinge at the wall and by a cable whose pther end is tied to the wall at a point 3.0 m above the left end of the strut. find the tension in the supporting cable and the force of the hinge on the strut
A uniform drawbridge must be held at a 38o angle above the horizontal to allow ships to pass underneath. The drawbridge weights 55000 N and is 15.0 m long. A cable is connected 3.5 m from the hinge where the bridge pivots (measured along the bridge) and pulls horizontally on the bridge to hold it in place. What is the tension in the cable? Find the magnitude and direction of the force the hinge exerts on the bridge. If the cable suddenly breaks, what is the magnitude of the angular acceleration of the drawbridge just after the cable breaks? What is the angular speed of the drawbridge as it becomes horizontal? What is the velocity of the drawbridge, just before it “hits” (i.e. goes horizontal)?
A 400.0-N sign hangs from the end of a uniform strut. The strut is 4.0 m long and weighs a 600.0N. The strut is supported by a hinge at the wall and by a cable whose other end it tied to the wall at a point 3.0 m above the left end of the strut. Find the tension in the supporting cable and the force of the hinge of tge strut.
The uniform boom shown below weighs 644 N, and the object hanging from its right end weighs 416 N. The boom is supported by a light cable and by a hinge at the wall. 45° | 20° 416 N Calculate the tension in the cable and the force by the hinge on the boom (both in N). (Enter the magnitudes.) tension in the cable force by the hinge N Does the force by the hinge act along the boom? (Assume this force acts along the boom if its direction in degrees above the horizontal is within 2% of the boom's angle above the horizontal.) O Yes O No
The uniform boom shown below weighs 644 N, and the object hanging from its right end weighs 416 N. The boom is supported by a light cable and by a hinge at the wall. 45° 20° 416 N Calculate the tension in the cable and the force by the hinge on the boom (both in N). (Enter the magnitudes.) tension in the cable 787.738 N force by the hinge 812.122 N
A shelf bracket is mounted on a vertical wall by a single screw. S S2 S1 Neglecting the weight of the bracket, and if s = 6.4 cm, s1 the horizontal force component exerted on the bracket by the screw when a 95.2 N vertical force is applied as shown. Imagine that the bracket is slightly loose. 5.4 cm and s2 = 2.2 cm, find =
A uniform horizontal strut weighs 400.0 N. One end of the strut is attached to a hinged support at the wall, and the other end of the strut is attached to a sign that weighs 200.0 N. The strut is also supported by a cable attached between the end of the strut and the wall. Assuming that the entire weight of the sign is attached at the very end of the strut, find the tension in the cable and the force at the hinge of the strut.
A 400.0-N sign hangs from the end of a unifrom strut. the strut is 4.0 m long and weighs 600.0 N. The strut is supported by a hinge at the wall and by cable whose other end is tied to the wall at a point 3.0 m above the left end of the strut. Find the tension in the supporting cable and the force of the hinge on the strut.
OT SHARE 1. A mass m, is suspended from two cables fixed at point B. The cables are fixed to a rigid support at A and C. If the tension in cable AB is not to exceed 120 N, find the maximum mass, m, that can be suspended. A 30 45' 40°