The electrical conductivity of pure silicon.
Answer to Problem 69AAP
The electrical conductivity of pure silicon is
Explanation of Solution
Write the expression for electrical conductivity,
Here, temperature is
Write the expression for electrical conductivity,
Here, the electrical conductivity is
Write the expression for temperature in
Here, temperature in Kelvin is
Conclusion:
Substitute
Substitute
Substitute
Divide Equation (IV) by (V).
Substitute
Substitute
Substitute
The electrical conductivity of pure silicon is
Want to see more full solutions like this?
Chapter 14 Solutions
Foundations of Materials Science and Engineering
- Calculate the maximum temperature allowed for the silicon if the intrinsic carrier concentration is 1×1012 electrons/m. О з00 к 360 K O 364 K O 382 Karrow_forwardM4.25 (Sl units) What is the resistance R of a length of copper wire whose length 10 m and whose diameter 0.30 mm? Use Table 4.3 of the book for reference. Round to the nearest thousandth of an ohm ()arrow_forwardHow many nanostructured dimensions does a C nanotube have? Does a C nanotube with its nanostructured dimensions always have the same properties? If not, explain what the electrical conductivity properties in a nanotube depend on?arrow_forward
- An ideal capacitor with a capacitance of 90.0 nF is charged up to a voltage of 3.00 V. (i) Calculate the magnitude of charge stored in the capacitor. (ii) Determine the potential energy stored in the capacitor. (iii) The capacitor is disconnected from the battery and is then inserted with a piece of mica of which the dielectric constant is 5.00. Compare the final potential energy to the initial potential energy in the capacitor.arrow_forwardA piezoelectric material has a Young’s modulus of 72000 MPa. What stress is required to change its polarization from 640 C/m2 to 645 C/m2?arrow_forwardA wire of radius 1 mm and conductivity 5x [10] ^7 S/m if an electric field of 5 mV/m is applied. Determine the current in the wire * 0.943 0.628 0.785 O 0.393arrow_forward
- Find the resistance at 20°C of an annealed copper bus bar 3 m in length and 0.5 cm by 3 cm in rectangular cross section. (The resistivity of the copper wire is 1.72 x 1042-m). إجابتكarrow_forwardA large motor neuron runs from the brain to the arm. The neuron contains a core of bundled microtubules. If the motor neuron is 40 cm long, and the magnitude of the potential difference from the top of the neuron to the bottom is 40 mV, then what is a reasonable estimate for the magnitude of the cross sectional area of the neuron? Take the resistivity of the microtubule to be about 40 MO/um.arrow_forwardThe band gap in silicon is 1.12 eV. Calculate the maximum wavelength of electromagnetic radiation that results in promotion of electrons from the valence to the conduction band.arrow_forward
- A 90 wt% Cu - 10 wt% Ni alloy is known to have an electrical resistivity of 1.90 x 10-7 Ω * m at room temperature (25◦C). (a) Calculate the composition of a copper-nickel alloy that gives a room-temperature resistivity of 2.5 x 10-7 Ω * m. The room-temperature conductivity of pure copper is 6.0 x 107 [(Ω * m)−1] (from Table 18.1); assume that copper and nickel form a solid solution. (b) Briefly discuss the validity of your assumption that copper and nickel form a solid solutionarrow_forward4. Fermi-Dirac statistics Develop an Excel sheet to numerically calculate the numbers of electrons with energies above the Fermi energy level EF = 5.5 eV in silver at 300 K and 1000 K, assuming EF does not change with temperature. m mm marrow_forwardDetermine the resistance of a copper wire that has a cross-sectional area as 8.3 mm2. The length and the electrical resistivity of the copper wire are 76.2 m and 1.62 x 10-6 Ωm. The resistance of a copper wire (in 2)arrow_forward
- Automotive Technology: A Systems Approach (MindTa...Mechanical EngineeringISBN:9781133612315Author:Jack Erjavec, Rob ThompsonPublisher:Cengage Learning