MY NOTESASK YOUR TEACHERPRACTICE ANOTHERA rotating wheel requires 6.00 s to rotate 28.0 revolutions. Its angular velocity at the end of the 6.00-s interval is 96.0 rad/s. What is the constant angularacceleration (in rad/s) of the wheel?You may have neglected the wheel's initial angular velocity. The wheel will not rotate through the required number of revolutions in the specified time if it starts atrest and has the angular acceleration that you calculated. rad/s²Need Help? RodMaster

We can use the following kinematic equation for rotational motion:where: is the final angular…

A rotating wheel requires 6.00 s to rotate 28.0 revolutions. Its angular velocity at the end of the 6.00-s interval is 96.0 rad/s. What is the constant angular acceleration (in rad/s) of the wheel? X You may have neglected the wheel's initial angular velocity. The wheel will not rotate through the required number of revolutions in the specified time if it starts at rest and has the angular acceleration that you calculated, rad/s

A rotating wheel requires 6.00 s to rotate 28.0 revolutions. Its angular velocity at the end of the 6.00-s interval is 96.0 rad/s. What is the constant angular acceleration (in rad/s) of the wheel? X You may have neglected the wheel's initial angular velocity. The wheel will not rotate through the required number of revolutions in the specified time if it starts at rest and has the angular acceleration that you calculated, rad/s

University Physics Volume 1

18th Edition

ISBN:9781938168277

Author:William Moebs, Samuel J. Ling, Jeff Sanny

Publisher:William Moebs, Samuel J. Ling, Jeff Sanny

Chapter10: Fixed-axis Rotation

Section: Chapter Questions

Problem 38P: During a 6.0-s time interval, a fly-wheel with a constant angular acceleration turns through 500...

See similar textbooks

Similar questions

At its peak, a tornado is 60.0 m in diameter and carries 500 km/h winds. What is its angular velocity in revolutions per second?
During a 6.0-s time interval, a fly-wheel with a constant angular acceleration turns through 500 radians that acquire an angular velocity of 100 rad/s. (a) What is the angular velocity at the beginning of the 6.0 s? (b) What is the angular acceleration of the fly-wheel?
With the aid of a string, a gyroscope is accelerated from rest to 32 rad/s in 0.40 s under a constant angular acceleration. (a) What is its angular acceleration in rad/s2 ? (b) How many revolutions does it go through in the process?
A wheel has a constant angular acceleration of 5.0rad/s2 . Starting from rest, it turns through 300 rad. (a) What is its final angular velocity? (b) How much time elapses while it turns through the 300 radians?
A torque of 50.0Nm is applied to a grinding wheel (l=20.0kgm2) for 20 s. (a) If it starts from rest, what is the angular velocity of the grinding wheel after the troque is removed? (b) Through what angle does the wheel move while the torque is applied?
Olympic ice skaters are able to spin at about 5 rev/s. (a) What is their angular velocity in radians per second? (b) What is the centripetal acceleration of the skater's nose if it is 0.120 m from the axis of rotation? (c) An exceptional skater named Dick Button was able to spin much faster in the 1950s than anyone since—at about 9 rev/s. What was the centripetal acceleration of the tip of his nose, assuming it is at 0.120 m radius? (d) Comment on the magnitudes of the accelerations found. It is reputed that Button ruptured small blood vessels during his spins.
A bug of mass 0.020 kg is at rest on the edge of a solid cylindrical disk (M=0.10kg,R=0.10m) rotating in a horizontal plane around the vertical axis through its center. The disk is rotating at 10.0 rad/s. The bug crawls to the center of the disk. (a) What is the new angular velocity of the disk? (b) What is the change in the kinetic energy of the system? (c) If the bug crawls back to the outer edge of the disk, what is the angular velocity of the disk then? (d) What is the new kinetic energy of the system? (e) What is the cause of the increase and decrease of kinetic energy?
A cylinder with rotational inertia I1=2.0kgm2 rotates clockwise about a vertical axis through its center with angular speed 1=5.0rad/s . A second cylinder with rotational inertia I2=1.0kgm2 rotates counterclockwise about the same axis with angular speed 2=8.0rad/s . If the cylinders couple so they have the same rotational axis what is the angular speed of the combination? What percentage of the original kinetic energy is lost to friction?
On takeoff, the propellers on a UAV (unmanned aerial vehicle) increase their angular velocity form rest at a rate of =(25.0t)rad/s for 3.0 s. (a) What is the instantaneous angular velocity of the propellers at t=2.0s ? (b) What is the angular acceleration?
Integrated Concepts An ultracentrifuge accelerates from rest to 100,000 rpm in 2.00 min. (a) What is its angular acceleration in rad/s2? (b) What is the tangential acceleration of a point 9.50 cm from the axis of rotation? (c) What is the radial acceleration in m/s2 and multiples of g of this point at full rpm?
The axis of Earth makes a 23.5 angle with a direction perpendicular to the plane of Earth’s orbit. As shown below, this axis precesses, making one complete rotation in 25,780 y. (a) Calculate the change in angular momentum in half this time. (b) What is the average torque producing this change in angular momentum? (c) If this torque were created by a pair of forces acting at the most effective point on the equator, what would the magnitude of each force be?
A track star runs a 400-m race on a 400-m circular track in 45 s. What is his angular velocity assuming a constant speed?