Concept explainers
The principle on which the operation of a D’Arsonal type galvanometer is based.
Answer to Problem 1PLA
The operation of a D’Arsonal type galvanometer is based on the principle that wire coil placed in a magnetic field would experience a torque when the current is applied.
Explanation of Solution
D’Arsonal type galvanometer can be calibrated to work as ammeter or voltmeter. And its mechanism is mainly based on the
The principle of D’Arsonal type galvanometer is based on the fact that wire coil placed in a magnetic field would experience a torque when the current is applied. Then the torque is exerted against a spring.
Therefore, the deflection of the needle attached to the coil in the galvanometer is proportional to the current in the coil.
Conclusion:
Thus, the operation of a D’Arsonal type galvanometer is based on the principle that wire coil placed in a magnetic field would experience a torque when the current is applied.
Want to see more full solutions like this?
- Include all x-componenet and y-component calculations. Also include draings of magnetic field directions and theta with triangles.arrow_forwardA teacher wants to build another student a giant solenoid of one layer of tightly-wrapped 12-gauge copper wire (diameter is 0.2032 mm). It is to be 3.5 meters tall and square in shape with 0.75-m long sides. He’d like to achieve a 150-mT field inside it. How much current will it need to draw? Please show a step by step process with equations, with full explanations, and given units.arrow_forwardA paramagnetic sample shows a net magnetisation of 6 A/m when it is placed in an external magnetic field of 0.4 T at a temperature of 4 K. When the sample is placed in an external magnetic field of 0.3 T at a temperature of 24 K, then the magnetisation will be:arrow_forward
- Consider the situation shown in the figure below. An electric field of 300 V/m is confined to a circular area d= 11.1 cm in diameter and directed outward perpendicular to the plane of the figure. Consider that the field is increasing at a rate of 19.6 V/m s. (a) what is the direction of the magnetic field at the point P,r 14.4 cm from the center of the circle? upwards O downwards (b) what is the magnitude of the magnetic field at the point P= 14.4 cm from the center of the circle? 1 BSE-18 Your response differs from the correct answer by more than 10%. Double check your calculations T Additional Materialsarrow_forwardDiscuss the origin of paramagnetism, diamagnetism and ferromagnetism. Draw a typical M-H curve for ferromagnetism material and explain the different stages of magnetization process on the basis of Domain theoryarrow_forwardYou are working in a mass spectrometer laboratory, performing measurements with a Bainbridge mass spectrometer, as diagrammed in the figure below. Во, in P Detector array Bin * Velocity selector E Everything is going well until you turn on the apparatus for a new measurement and notice that the device that measures B, has failed. Now, how are you going to know what the field in the upper portion of the spectrometer is? You come up with a brilliant idea! You have a material that undergoes radioactive alpha decay (which we will study in the chapter on nuclear physics), where the ejected alpha particle is a helium nucleus: two protons and two neutrons. In this type of decay, the mass of the daughter particle (after the decay) is less than that of the parent particle (before the decay) by the mass of an alpha particle, 6.64 × 10-27 kg. You strip an electron from each parent atom and send the resulting singly charged ions into the velocity selector While moving down the length of the…arrow_forward
- Use Biot-Savart's law to calculate the magnetic field at the center of a conductor curved in the shape of a semicircumference of radius b, and coursed by a constant current I.arrow_forwardMagnetic flux density is given by the units of T (Tesla). 1T = 1 Nm-1A-1. How to obtain it in gs-2A-1?arrow_forwardQuestion 1. Plot a Graph with the data in Table 2, use Magnetic Force as the vertical axis and Current as the horizontal axis. Perform a linear least squares fit on the Graph, record the slope, intercept, and correlation coefficient in the Table 3. [Refer to Appendix 3_ Graphical Analysis of Experiment Results.docx]. Assume the horizontal copper trace on the Magnetic Force Board perfectly perpendicular to magnetic field, determine the magnitude of the magnetic field B, show your calculation in Table 3. Current (A) Table 2 0 0.25 0.5 0.75 1 -0.5 -1 Table 3 Mass of Magnet Assembly (gram) (Measured from scale) 0.000 0.039 0.080 0.122 0.162 -0.094 -0.222 Graph: Measure magnetic force versus Current Slope: Intercept: Correlation coefficient: Calculate magnetic field strength from the slope of your graph: Magnetic Force FB (Newton) 0 0.3822 0.784 1.1956 1.5876 -0.9212 -2.1756arrow_forward
- Explain qualitatively on the basis of domain picture the irreversibility in the magnetisation curve of a ferromagnet.arrow_forwardFind the magnetic flux through all five surfaces of the wedge in Figure 1, if the magneticfield in the area is given by: B= (0.002î+ 0.003ĵ) Tand show that the total flux through the wedge is zero.In your answer, play particular attention to the neatness of the presentation and payattention to the following and apply them in your answer:(i) State the approach you are going to adopt to solve the problem.arrow_forwardA cube of uniformly magnetized material of side length L = 0.050 m has magnetization M = 2000 amperes per meter when sitting on the table. You then place the cube in a uniform, upward pointing magnetic field of strength Bext = 0.0040T. The cube’s magnetization vector is also pointing upward. The magnetization remains at M = 2000 A/m. (a) From what we’ve said above, must the cube be made from a paramagnetic, diamagnetic, or ferromagnetic material? (b) When the cube is sitting in the external magnetic field, what is the strength of the magnetic field inside the cube? (c) When the cube is in the external field, how much work would it take to flip the cube over?arrow_forward
- Glencoe Physics: Principles and Problems, Student...PhysicsISBN:9780078807213Author:Paul W. ZitzewitzPublisher:Glencoe/McGraw-Hill