The drinking water needs of an office are met by large water bottles. One end of a 0.6-cm diameter plastic hose is inserted into the bottle placed on a high stand, while the other end with an on/off valve is placed 0.6 m below the bottom of the bottle. If the water level in the bottle is 0.45 m when it is full, determine how long it will take at the minimum to fill a 02 glass when the bottle is first opened. Neglect frictional and valve losses. ZL

The drinking water needs of an office are met by large water bottles. One end of a 0.6-cm diameter plastic hose is inserted into the bottle placed on a high stand, while the other end with an on/off valve is placed 0.6 m below the bottom of the bottle. If the water level in the bottle is 0.45 m when it is full, determine how long it will take at the minimum to fill a 02 glass when the bottle is first opened. Neglect frictional and valve losses. ZL

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

A water storage tank contains water whose level is 18 meters above the bottom of the tank. A flexible rubber pipe is connected to the bottom of the tank, and the outlet tip of the rubber pipe is pointed in a vertical upward position. The water storage tank is sealed to maintain the air pressure gage inside the tank at 206 kiloPascal. The maximum height in meters to which the water stream could rise vertically is-------- meters.
The left limb of a U-tube manometer is connected to a pipe conveying water,the level of mercury (SG=13.6) in the leg being 0.8m below the center of the pipeline and the right limb is open to atmosphere. The level of mercury in the rightlimb is 0.6m above that in the left limb and the space above mercury in the rightlimb contains benzene (SG=0.88) to a height of 0.4m. Determine the pressure ofwater in the pipe. * Complete and precise solution
The right limb of a simple U-tube manometer containing mercury is open to the atmosphere while the left limb is connected to a pipe in which a fluid of SG = 0.9 is flowing. The center of the pipe is 12 cm below the level of mercury in the right limb. Find the pressure of fluid in the pipe if the difference of mercury level in the two limbs is 20 cm. Use SGHg = 13.6. P A 12 I 21K 20 cm
A U-tube containing mercury (sg = 13.6) has itsright-hand limb open to the atmosphere and the left-handlimb connected to a pipe conveying water under pressure,the difference in the level of mercury in the two limbs being200 mm. If the mercury level in the left-hand limb is 400 mmbelow the pipe's center line, find the pipeline's absolutepressure (kPa). Also, find the new difference in levels ofmercury in the U-tube if the pressure in the pipe falls by 2kPa.
(1) The mercury manometer in the Figure below is connected to the inlet and outlet of a water pump (the left side to the inlet and the right side to the outlet). Assuming that the inlet and outlet are at the same elevation, determine the pressure increase for the pump. Inlet and outlet clevation Water hy =15 cm Mercury 13.9 keiul. Density of mercury = 13.6 g/cm3 = 13,593 kg/m3 Density of water = 1.0 g/cm3 = 1,000 kg/m3
solve for the time it takes to reduce the heigt of water in a 1-m diameter cylindrical tank by 30% through a 5-cm hole at the bottom; The tank was initially filled to 3/4 of its total height Use Toricelli's law
A large, cylindrical water tank with diameter 3.20 m is on a platform 2.00 m above the ground. The vertical tank is open to the air and the depth of the water in the tank is 2.00 m. There is a hole with diameter 0.560 cm in the side of the tank just above the bottom of the tank. The hole is plugged with a cork. You remove the cork and collect in a bucket the water that flows out the hole. When 1.00 gal of water flows out of the tank, what is the change in the height of the water in the tank?Express your answer in millimeters. How long does it take you to collect 1.00 gal of water in the bucket?Express your answer in seconds.
. A 2 m tall barrel is closed on top except for a thin pipe extending 8 m up from the top. When the barrel is filled with water up to the base of the pipe (2 m deep), the water pressure on the bottom of the barrel is 20 KPa. What is the pressure on the bottom when water is added to fill the pipe to its top?
Two pipes A & B carries an oil of specific gravities 0.9 & 1.2 respectively. The center of the pipe A is 65 cm above the pipe B. The height of oil in right limb is 35 cm. Also, the mercury level difference is found in right limb as 50 cm. Find the pressure difference between these two pipes in kPa. Also find the pressure equivalent in water head in mm. -The difference of pressure between two pipes (PA-PB) (Unit is in kPa) = -Equivalent to Water head in mm =
A hollow cylinder 80 cm long in diameter, one end closed, is immersed vertically with its closed end being held 7.50 m below the water surface. The cylinder is at first full of water, but compressed air is admitted from beneath in the immersed position until it has displaced two thirds of water. Patm-101.5 kPa. Find the total absolute pressure of air in the cylinder kPa. 7.5 m 0.8 m 0.6 0.3 Do not write the unit. You will only input the numerical answer in the space provided. Unit of the Correct Answer: kPa abs Decimal Places required in the final answer: 3
A 3 m diameter vertical cylindrical tank is filled with water to a depth of 11 m. The rest of the tank is filled with air at atmospheric pressure. The tank is surrounded by air at atmospheric pressure. Assume pw =998 kg m-³ and g =9.81 ms-². What is the gage pressure on the bottom of the tank, in kPa? What is the absolute pressure on the bottom of the tank, in kPa? Determine the net force on the bottom of the tank, in kN.
Two vertical circular cylindrical tanks are connected near the bottom by a short tube having a cross-sectional area of 725 cm2. The inside diameters of the tanks are 3m and 1.5 m, respectively. The tanks contain oil. With the valve in the tube closed, the oil surfaces are 4m in the larger tank and 0.6 m in the smaller above the tube. With c=0.78, find the time (in seconds) required for the surfaces to equalize following a quick opening of the valve. Assume the properties of the tube to be similar to that of an orifice.