A weight (with a mass of 71 kg) is suspended from a point near the right hand end of a uniform boom with a mass of 51 kg. To support the uniform boom, a cable runs from this same point to a wall (the left-hand vertical coordinate y = 7, x = 6) and by a pivot on the same wall at an elevation of 3 m. Calculate the tension T in the cable. The acceleration of gravity is 9.8 m/s2 Answer in units of N.

A weight (with a mass of 71 kg) is suspended from a point near the right hand end of a uniform boom with a mass of 51 kg. To support the uniform boom, a cable runs from this same point to a wall (the left-hand vertical coordinate y = 7, x = 6) and by a pivot on the same wall at an elevation of 3 m. Calculate the tension T in the cable. The acceleration of gravity is 9.8 m/s2 Answer in units of N.

Physics for Scientists and Engineers: Foundations and Connections

1st Edition

ISBN:9781133939146

Author:Katz, Debora M.

Publisher:Katz, Debora M.

Chapter14: Static Equilibrium, Elasticity, And Fracture

Section: Chapter Questions

Problem 85PQ

See similar textbooks

Similar questions

A beam with a length of 2 m and a mass of 10 kg supports a 50 kg box. The beam is connected to a wall by a hinge at its base and a horizontal wire. The wire is connected to the beam 1.5 m from the hinge and makes an angle θ of 35o to the beam. The goal is to find the tension in the wire and the horizontal and vertical components of the force exerted by the hinge on the board
A uniform horizontal beam with a length of ℓ = 8.00 m and a weight of Wb =200 N is attached to a wall by a pin connection. Its far end is supported by a cable that makes an angle of φ = 53.0° with the beam (as shown). A person of weight Wp = 600 N stands a distance d = 2.00 m from the wall. Find the tension in the cable as well as the magnitude and direction of the force exerted by the wall on the beam.
A beam with length of 2 m and a mass of 10 kg supports a 50 kg box. The beam is connected to a wall by a hinge at its base and a horizontal wire. The wire is connected to the beam 1.5 m from the hinge and makes an angle θ of 35o to the beam. The goal is to find the tension in the wire and the horizontal and vertical components of the force exerted by the hinge on the board. Suppose the maximum tension that the wire can withstand is 1500 N. What is the maximum load that the hinge can support before the wire breaks?
a uniform beam of length 12.0 m is supported by a horizontal cable and a hinge at angle u =50.0°. The tension in the cable is 400 N. In unit-vector notation, what are (a) the gravitational force on the beam and (b) the force on the beam from the hinge?
In the figure, a uniform beam with a weight of 51.7 N and a length of 3.12 m is hinged at its lower end, and a horizontal force F of magnitude 56.8 N acts at its upper end. The beam is held vertical by a cable that makes angle e = 21.1° with the ground and is attached to the beam at height h = 2.29 m. What are (a) the tension in the cable, (b) the x-component of the force on the beam from the hinge, and (c) the y-component of the force on the beam from the hinge. L. (a) Number i Units (b) Number i Units (c) Number i Units
A uniform horizontal beam 5.00 m long and weighting 3.03 102 N is attached to a wall by a pin connection that allows the beam to rotate. Its far end is supported by a cable that makes an angle of 53.0° with the horizontal (Figure (a)). If a person weighing 6.05 102 N stands 1.60 m from the wall, find the magnitude of the tension in the cable and the force exerted by the wall on the beam. T = N Rx = N Ry = N
A uniform horizontal beam 5.00 m long and weighting 3.03 102 N is attached to a wall by a pin connection that allows the beam to rotate. Its far end is supported by a cable that makes an angle of 53.0° with the horizontal (Figure (a)). If a person weighing 6.05 102 N stands 1.60 m from the wall, find the magnitude of the tension in the cable and the force exerted by the wall on the beam. T = N Rx = N Ry = N Even if we selected some other axis for the torque equation, the solution would be the same. For example, if the axis were to pass through the center of gravity of the beam, the torque equation would involve both T and Ry. Together with Equations (1) and (2), however, the unknowns could still be found—a good exercise. In this example, notice the steps of the Problem-Solving Strategy could be carried out in the explicit recommended order.QUESTION What happens to the tension in the cable if the man in Figure (a) moves farther away from the wall? The tension would…
a 50.0 kg uniform square sign, of edge length L=2.00m, is hung from a horizontal rod of length dh = 3.00 m and negligible mass. A cable is attached to the end of the rod and to a point on the wall at distance dv = 4.00 m above the point where the rod is hinged to the wall. (a) What is the tension in the cable? What are the (b) magnitude and (c) direction (left or right) of the horizontal component of the force on the rod from the wall, and the (d) magnitude and (e) direction (up or down) of the vertical component of this force?
A uniform beam of length L = 11.7 meters and mass of 109.3 kg is pinned at one end and is being supported by a wire as shown. The wire is connected to the beam x = 3.3 meters from the pin. A person of mass 81.6 kg is standing all the way out on the edge of the beam. If θ = 17.3 degrees and φ = 79.4 degrees, what is the tension in the wire?
A uniform plank of length 2.00 m and mass 30.0 kg is supported by three ropes, as indicated by the blue vectors. Find the tension in each rope when a 700 N person is d = 0.500 m from the left end
A 24.0 kg beam of length L = 35.1 m is attached at an angle of θ = 36.40 to the side of a building. If the beam is holding up a mass M = 64.4 kg and is supported by a horizontal wire that is attached at location X = 24.5 m (measured along the beam from the building to the wire attachment point), what is the force the building is putting on the beam? What is the Direction of force (measured as an angle off of the side of the building (think west of north)
A 10.0-kg monkey climbs a uniform ladder with weight 1.20 × 102 N andlength L = 3.00 m as shown. The ladder rests against the wall and makes an angle of θ = 60.0° with the ground. The upper and lower ends of the ladder rest on frictionless surfaces. The lower end is connected to the wall by a horizontal rope that is frayed and can support a maximum tension of only 80.0 N. (a) Draw a force diagram for the ladder. (b) Find the normal force exerted on the bottom of the ladder. (c) Find the tension in the rope when the monkey is two-thirds of the way up the ladder. (d) Find the maximum distance d that the monkey can climb up the ladder before the rope breaks. (e) If the horizontal surface were rough and the rope were removed, how would your analysis of the problem change? What other information would you need to answer parts (c) and (d)?