A solid round bar of diameter 250mm has a tensile force of 0.2kN acting on it. What is the stress acting on the bar?
Q: A constant wind blowing against the side of this chimney has caused creeping strains in the mortar…
A: Let us consider the height of the chimney is h and having constant cross-section against wind, the…
Q: A steel cylinder of 1 metre diameter is carrying a fluid under a pressure of 10 N/mm2. Calculate the…
A: Note: Since you have asked multiple question, we will solve the first question for you. If you want…
Q: A steel rod is subjected to a stress of 200 MPa and has Young's modulus of 200 GPa. Calculate…
A:
Q: 1. A bar is subjected to a tensile stress of 100 MPa, Determine the normal and tangential stresses…
A: Givenσ=100Mpaθ=30o
Q: 1.) A long flat steel bar 6 in. wide and 3/8 in. thick has a 2.5 in. diameter circular hole…
A:
Q: The steel bolt and anchor assembly is used to reinforce the roof of a passageway in an underground…
A:
Q: Consider a tetrahedron containing point Q and show the forces on the faces of the tetrahedron due…
A: Since you have asked multiple questions, we will solve the first question for you. If you want any…
Q: A hollow cylinder of external diameter 50 mm and internal diameter 30 mm is subjected to tensile…
A:
Q: Calculate the normal stress in the copper rod if the temperature of the entire assembly is raised by…
A:
Q: A wooden bar is subjected to a tensile stress of 5 MPa. What will be the values of normal and shear…
A: Given data: The tensile stress in wooden bar is σ = 5 MPa. The angle between the section and the…
Q: A bar is applied a tensile load of 50 kN having diameter 10 mm, Calculate the tensile stress induc
A: Given:force, F=50 kNdiameter, d=10 mm
Q: a. A metal thickness 16mm and having a rectangular cross-section carries a load of 60KN. Find the…
A:
Q: (Q1) A steel tube, 25 mm outside diameter and 12mm inside diameter, cames an axial tensile load of…
A:
Q: A 1.2 m pulley is fastened to a 5 in shaft by means of a square key with 140 mm long. What force…
A: Given Data The diameter of the pulley is: D=1.2 m the diameter of the shaft is: d=5 in=127 mm The…
Q: An aluminum rod length of 1.0 m and cross-secrional area 0.0005 m2 is used to support a load of…
A: Calculated stress on the aluminum rod. length of 1.0 m and cross-secrional area 0.0005 m2 is used to…
Q: 4. A ring made of 2-5 cm diameter steel bar carries a pull of 10 kN. Calculate the maximum tensile…
A: Given: The diameter of ring, d = 2.5 cm 0.025 m The load, P = 10 kN The mean radius, R = 15 cm =…
Q: stresses at each of three holes of 3, 5 and 10 mm diameter.
A: Given: t=15 mm To determine: The stresses at each of three holes of 3, 5 and 10 mm diameter
Q: The wall thickness of a 1.2 m diameter spherical tank is 1.6875 mm. Calculate the allowable internal…
A:
Q: An eye bolt carries a tensile load of 2000 kg. Find the size of the bolt, if the tensile stress is…
A: The tension is defined by the following: "The force of a string,…
Q: A steel rod 10mm in diameter and 1 m long is heated from 20°C to 120°C. If E = 200GP%; a = 12x10-6…
A: Given Diameter of the rod = 10 mm Length of the rod = 1 m Initial temperature = 20o Final…
Q: A steel hoop. 10 mm thick and 80 mm wide, with inside diameter 1500.0 mm. 5. Is neated and shrunk…
A:
Q: 1. A BRONZE ROD IS SUBJECTED TO A TENSILE LOAD OF 15,000N. IF ITS ALLOWABLE STRESS IS 75 MPa,…
A: GivenP=15000NLi=40mmLo=L=?σallow=75MPa=75 N/mm2
Q: 2.49. A bar of rectangular cross section 20 mm x 3 mm has a central hole of diameter 6 mm. Find the…
A:
Q: The stress in a wire of diameter 2 mm if a load of 100 gm is applied to a wire.
A:
Q: A steam engine cylinder has an effective diameter of 35 cm and the maximum steam pressure acting on…
A:
Q: If the cross sectional area of bar BD is 0.5 in2, what is the stress in bar BD?
A:
Q: compression force of 50 N applied on the round bar of 500 mm diameter, Calculate the stress…
A: Given:compressive force, F=50 Ndiameter of the round bar, d=500 mm or 0.5 m
Q: A -in-diameter steel tension rod is 5 ft long and carries a load of 15 kip. Find the tensile stress,…
A:
Q: Calculate the resulting stress in an aluminum wire, 4-m long and 2.6 mm in diameter, if a 12.5 -kg…
A:
Q: AN 8mm DIAMETER STEEL ROD, 20m LONG SUPPORTS A JOKN WEIGHT. FIND THE MAXIMUM. TENSILE STRESS H THE…
A: Unit weight of steel, γ=77 kN/m3 So total weight will be due to 10kN and self-weight combined. So,…
Q: 3. A wrought iron rod is under a compressive load of 350 kN. If the permissible stress for the…
A: We are suppose to solve only one question. Please post other question as a separate question. For…
Q: A steel tube, 25 mm outside diameter and 12mm inside diameter, cames an axial tensile load of 40 kN.…
A: GivenD=25 mm=0.025md=12 mm=0.012mF=40 kN=40×103 Nσmax=225 MN/m2=225 ×106 N/mAskedσ=?Fmax=?
Q: A 5-m high aluminum cylinder must support a load of 450 kN. If the maximum allowable stress is 0.14…
A: Write the given values along with the suitable variables.
Q: A steel punch having diameter 10 mm is used to make hole in a 2.5cm thick steel plate. What will be…
A:
Q: A cylindrical pressure vessel is fabricated from steel plating that has wall a thickness of 10 mm…
A:
Q: A wrought iron rod is under a compressive load of 350 kN. If the permissible stress for the material…
A: Compressive load on the rod, P=350 kN=350*103 N Permissible stress for the material, σ=52.5 N/mm2
Q: Answer the attach file
A: We are authorized to answer one question at a time, since you have not mentioned which question you…
Q: A 1 Mg container hangs from a 16 mm diameter steel cable. What is the stress in the cable? (Express…
A: It is the case of stress developed due to axial loading. Tensile stress=axial force/cross section…
Q: A steel bolt 8mm diameter fits loosely inside aluminium tube 8mm diameter and 16 mm outside diameter…
A: Diameter of steel rod=8 mmInside dia. of Aluminium tube=8mmOuter dia. of Aluminium…
Q: If a bar is subject to a compressive force of 15 lb, and the area of the bar is 0.1 in^2 (square…
A:
Q: Q5/ Calculate the maximum stress in a round steel bar, 200 mm diameter and 15 m long. due to its own…
A: Given data: d=200 mmL=15 mρ=7.75 mg/m3 Need to determine the maximum stress in the round steel bar.…
Q: An axial bar fixed at both ends with no loads applied is subjected to an increase of temperature.…
A:
Q: A wooden bar is subjected to a tensile stress of 5 mpa. What will be the values of normal stress and…
A: Given data The tensile stress σ = 5 MPa. angle between the section and the tensile stress is θ =…
Q: A rod is hanging vertically, supports a load of 2000N. Neglecting the weight of the wire, determine…
A: Given data, P= 2000 N Tensile stress = σ= 140 MPa, N/mm2
Q: Calculate the maximum stress in a 25 mm thick perforated bar and show its location o
A: Given:Force, F=5000 NMaximum stress occurs in the material where area of the material is less
Q: Question 1 A compressive force (F) of 10kN is applied to a 25mm diameter round bar. Calculate the…
A:
Step by step
Solved in 2 steps with 2 images
- Rod of diameter 20 mm is loaded with 5kN tension force. What is the magnitude of stress in the rod?Find stress of a aluminum cylinder of diameter 12.8mm and gauge length 50.8mm. The force applied is 47,500N.A tensile force. of 120 kN is applied on a 0.02-m diameter and 2-m long rod. After applying the load, the diameter decreases to 0.01998 m and the length increases to 2.01 m. The true stress on that rod is?
- An eye bolt carries a tensile load of 20 kN. Find the size of the bolt , if the tensile stress is not to exceed 100 MPa.1. Calculate the compressive stress in a 10.0 mm square rod loaded with 2250 N of force distributed normal to its end. Draw a free body diagram (geometry & forces) Identify stress plane Calculate stress and write it (with appropriate units) in the outlined boxA very fine fabric 0.020 mm in diameter can support a 20 g object. How does the stress in the fabric compare with the ultimate strength in tension of copper
- A mild steel rod having a stress of 50 Mpa and having a diameter of 20 mm What is the force applied on it.A bar, 12 mm in diameter is acted upon by an axial load of 20 kN. The change in diameter is measured as 0.03 mm. DeterminePoisson’s ratioYoung’s modulusBulk modulus Assume modulus of rigidity as 80 GPaA steel rod 8 mm in diameter is under the action of a tensile force (P) of 600 Newton. Calculate the tensile stress (s) acting in the bar. Solve for Mpa (round up to whole number)
- A Connecting Rod of a Diesel Engine in of an "I" cross section. It is subjected to a force of 85KN. Calculate the Tensile Stress developed in the Rod 21mm Emm 5mm 35mm 21mm4. A ring made of 2-5 cm diameter steel bar carries a pull of 10 kN. Calculate the maximum tensile and compressive stresses in the material of the ring. The mean radius of the ring in 15 cm.A tensile force of 100 kN is applied on a 0.02-m diameter and 2-m long rod. After applying the load, the diameter of the rod decreases to 0.01998 m and the length increases to2.01 m. The true axialstrain is?