A large steam pipe is covered with a 4.80 cm thick insulating material with a thermal conductivity of 0.17 W/(m°C). How much energy is lost every second when the temperature of the steam inside the pipe is at 265 °C and the temperature outside of the pipe is 13.0 °C? The pipe has a diameter of 3.70 m and a length of 185 m. Neglect losses through the ends of the pipe.

A large steam pipe is covered with a 4.80 cm thick insulating material with a thermal conductivity of 0.17 W/(m°C). How much energy is lost every second when the temperature of the steam inside the pipe is at 265 °C and the temperature outside of the pipe is 13.0 °C? The pipe has a diameter of 3.70 m and a length of 185 m. Neglect losses through the ends of the pipe.

College Physics

10th Edition

ISBN:9781285737027

Author:Raymond A. Serway, Chris Vuille

Publisher:Raymond A. Serway, Chris Vuille

Chapter11: Energy In Thermal Processes

Section: Chapter Questions

Problem 40P: The thermal conductivities of human tissues vary greatly. Fat and skin have conductivities of about...

See similar textbooks

Similar questions

(a) What is the rate of heat conduction through the 3.00-cm-thick fur of a large animal having a I .40-m surface area? Assume that the animal's skin temperature is 32.0 , that the air temperature is 5.00 , and that has the same thermal conductivity as air. (b) What food intake will the animal need in one day to replace this heat transfer?
An aluminum rod 0.500 m in length and with a cross sectional area of 2.50 cm2 is inserted into a thermally insulated vessel containing liquid helium at 4.20 K. The rod is initially at 3(H) K. (a) If one-halt of the rod is inserted into the helium, how many liters of helium boil off by the time the inserted half cools to 4.20 K? Assume the upper half does not yet cool, (b) If the circular surface of the upper end of the rod is maintained at 300 K. what is the approximate boil-off rate of liquid helium in liters per second after the lower half has reached 4.20 K? (Aluminum has thermal conductivity of 3 100 YV/m K at 4.20 K; ignore its temperature variation. The density of liquid helium is 125 kg/m3.)
A 2.44 m wide by 1.15 m high metal plate must be insulated to prevent contact burn injuries. If the heat transfer rate is 125 W and the temperature across the insulation must be reduced from 88.3°C to 40.7°C, what is the minimum thickness (in cm) of insulation required [round your final answer to two decimal places]? {kins = 0.035 W/m-K} Insulation Н W L
A walrus transfers energy by conduction through its blubber at the rate of 150 W when immersed in -1.00C water. The walrus’s internal core temperature is 37.0C, and it has a surface area of 2.00m. What is the average thickness of its blubber, which has the conductivity of fatty tissues without blood?
A counter-flow double-pipe heat exchanger is to heat water from 20°C to80°C at a rate of 1.2 kg/s. The heating is to be accomplishedby geothermal water available at 160°C at a mass flow rate of 2 kg/s. Theinner tube is thin-walled and has a diameter of 1.5 cm. The overall heat transfercoefficient of the heat exchanger is 640 W/m2?K. Using the effectiveness–NTUmethod, determine the length of the heat exchanger required to achieve thedesired heating.
A steam pipe is covered with 1.50-cm thick insulating material of thermal conductivity of 0.200 cal/cm · °C· s. How much energy is lost every second when the steam is at 165°C and the surrounding air is at 20.0°C? The pipe has a circumference of 800 cm and a length of 57.0 m. Neglect losses through the ends of the pipe. 3.69e12 Your response differs significantly from the correct answer. Rework your solution from the beginning and check each step carefully. MW
7B. A 98.2 g copper rod is cooled from 80°C to 25°C by tossing it into a very large swimming pool at 25°C. The temperature of the pool is not appreciably changed in the process. Compute ASys, ASur and ASniv- (Treat the copper rod as the system.) Some possibly useful data for Cu: C,m-24.44 J K 'mol 'univ p.m
temperature is 330 K. Find the heat loss per unit area and the temperature of the junction of the fire brick and insulating brick? RO 5. In Sohar Petroleum Company, a steam pipeline, with 150 mm ID and 160 mm OD carries steam. The pipeline is surrounded with a layer of heat insulating material (K=0.08 W/m.k) of thickness 100 mm. The temperature drops from 392.8 K to 313 K across the insulating surface. Determine the rate of heat loss per 1 m length of pipe line. ID = 1Somm 160 mm OD,h-loo mm .K=0.08w/m.k %3D 「-392.8 ん/ 12 = 313k = 313 K 2.
A heat conducting rod, 0.90 m long, is made of an aluminum section that is 0.10 m long, and an unknown material section that is 0.80 m long. Both sections have the same cross-sectional area. The aluminum end (rod 2) is maintained at a temperature of 50°C and the unknown material end (rod 1) is at 150°CTThe thermal conductivity of aluminum is 205 W/m-K and the junction temperature is 65°C. Steady state has been reached, and no heat is lost through the well-insulated sides of the rod. Find the thermal conductivity (k) of the unknown material. H T Rod 2 Rod 1
You would like to heat 10 litres of tap water initially at room temperature using an old 2 kW heater that has an efficieny of 70%. Estimate the temperature of the water after 20 minutes stating any assumptions made. a)
A solid cylindrical bar conducts heat at a rate of 25 W from a hot to a cold reservoir under steady state conditions. If both the length and the diameter of this bar are doubled, the rate at which it will conduct heat between these reservoirs will be O 12.5 W. O 200 W. O 100 W. O 25 W. O 50 W.
A counter-flow double-pipe heat exchanger is to heat water from 20°C to 80°C at a rate of 1.2 kg/s. The heating is to be accomplished by geothermal water available at 160°C at a mass flow rate of 2 kg/s. The inner tube is thin-walled and has a diameter of 1.5 cm. If the overall heat transfer coefficient of the heat exchanger is 640 W/m2?K, determine the length of the heat exchanger required to achieve the desired heating.