A 1,375 N dowel is held in place by a light cord at an angle attached to a pivot at the bottom, and a mass of weight w = 64.5° with the horizontal. Assume the dowel is uniform. (a) Find the tension in the supporting cord (in kN). KN (b) Find the components of the reaction force (in kN) exerted by the floor on the dowel. horizontal component: magnitude direction kN -Select-O vertical component: magnitude direction KN = 25.5° to the horizontal as shown in the figure. The dowel is 1,825 N hangs from its top. The dowel makes an angle of -Select-O

A 1,375 N dowel is held in place by a light cord at an angle attached to a pivot at the bottom, and a mass of weight w = 64.5° with the horizontal. Assume the dowel is uniform. (a) Find the tension in the supporting cord (in kN). KN (b) Find the components of the reaction force (in kN) exerted by the floor on the dowel. horizontal component: magnitude direction kN -Select-O vertical component: magnitude direction KN = 25.5° to the horizontal as shown in the figure. The dowel is 1,825 N hangs from its top. The dowel makes an angle of -Select-O

University Physics Volume 1

18th Edition

ISBN:9781938168277

Author:William Moebs, Samuel J. Ling, Jeff Sanny

Publisher:William Moebs, Samuel J. Ling, Jeff Sanny

Chapter12: Static Equilibrium And Elasticity

Section: Chapter Questions

Problem 38P: A uniform horizontal strut weighs 400.0 N. One end of the strut is attached to a hinged support the...

See similar textbooks

Similar questions

A 1,175 N dowel is held in place by a light cord at an angle ? = 31.0° to the horizontal as shown in the figure. The dowel is attached to a pivot at the bottom, and a mass of weight w = 2,100 N hangs from its top. The dowel makes an angle of ? = 59.0° with the horizontal. Assume the dowel is uniform. Find the tension in the supporting cord (in kN). kN (b) Find the components of the reaction force (in kN) exerted by the floor on the dowel. horizontal component:magnitude kNdirection vertical component:magnitude kNdirection
The walkway ABC of the footbridge is stiffened by adding the cable ADC and the short post of length L. If the tension in the cable is not to exceed 420 lb, what is the smallest value of L for which the 160-lb person can be supported at B?
A horizontal beam of length 4.08m and weight 130N is attached to a vertical wall at a right angle. There is also a support wire of length 5.04m which attaches the far end of the beam to the wall from above. Off of the far end of the beam also hangs an object of weight 330 N. (a) What is the magnitude of the tension in the support wire? (b) What is the horizontal component of the force exerted on the beam at the wall? (c) What is the vertical component of the force exerted on the beam at the wall?
A 1,100-N uniform boom at y = 56.5° to the horizontal is supported by a cable at an angle 0 = 33.5° to the horizontal as shown in the figure below. The boom is pivoted at the bottom, and an object of weight w = 2,150 N hangs from its top. 0 e Pivot W (a) Find the tension in the support cable. KN (b) Find the components of the reaction force exerted by the pivot on the boom. (Assume the positive x-direction is to the right and the positive y-direction is upward. Include the sign of the value in your answer.) horizontal component kN vertical component KN
20° 60° 2. A 10,000 N weight is supported by a cable attached to a massless beam, 4 m long, that can pivot at its base. The beam is stabilized by a second cable attached to a wall. It settles in the position shown on the left, where the weighted cable is vertical, the second cable is 20⁰ from horizontal, and the beam is 60° from horizontal. Find the tension in the second cable and the horizontal and vertical reaction forces at the W base of the beam.
A uniform plank of length 2.00 m and mass 31.0 kg is supported by three ropes, as indicated by the blue vectors in the figure below. Find the tension in each rope when a 680-N person is d = 0.500 m from the left end. magnitude ofT magnitude of T, magnitude of T, N N N 40.0° 2.00 m
A uniform, 8.0-m, 1500-kg beam is hinged to a wall and supported by a thin cable attached 2.0 m from the free end of the beam. The beam is supported at an angle of 30° above the horizontal. (a) find the tension in the cable and (b) how hard does the beam push inward on the wall?
A 1,300 N shaft is held in place by a light wire at an angle 0 = 29.0° to the horizontal as shown in the figure. The shaft is attached to a pivot at the bottom, and a mass of weight w = 2,075 N hangs from its top. The shaft makes an angle of Q = 61.0° with the horizontal. Assume the shaft is uniform. A 31 m (a) Find the tension in the supporting wire (in kN). KN (b) Find the components of the reaction force (in kN) exerted by the floor on the shaft. horizontal component: magnitude direction KN right vertical component: magnitude direction upward KN ¾ >
Find the tension T in the cable and the magnitude and direction of the force exerted on the strut by the pivot in the figure. Let w be the weight of the suspended crate full of priceless art objects. The strut is uniform and also has weight w. 30.0° 45.0° Fy Т. 45° Tcos 30° 30° W 15% FH 45° Tsin 30° W
A uniform drawbridge must be held at a 37° angle abovethe horizontal to allow ships to pass underneath. The drawbridge weighs45,000 N and is 14.0 m long. A cable is connected 3.5 m from thehinge where the bridge pivots (measured along the bridge) and pullshorizontally on the bridge to hold it in place. What is the tension in the cable?
A uniform drawbridge must be held at a 38o angle above the horizontal to allow ships to pass underneath. The drawbridge weights 55000 N and is 15.0 m long. A cable is connected 3.5 m from the hinge where the bridge pivots (measured along the bridge) and pulls horizontally on the bridge to hold it in place. What is the tension in the cable? Find the magnitude and direction of the force the hinge exerts on the bridge. If the cable suddenly breaks, what is the magnitude of the angular acceleration of the drawbridge just after the cable breaks? What is the angular speed of the drawbridge as it becomes horizontal? What is the velocity of the drawbridge, just before it “hits” (i.e. goes horizontal)?
A 3 m long weightless beam is supported at each end by cables. A painter weighing 900 N stands 1 m from the left cable. Calculate the tension in each cable.