TWM Company purchases 8000 units of product each year at a unit cost of $10.00. The order cos $30.00 per order, and the holding cost per unit per year is $3.00. a) What are the economic order quantity, the total annual cost, the number of orders to place in on year, and the reorder point when the lead time is two weeks? b) What happens to the EOQ if backordering is possible and the stockout cost per unit per year is $1.00? c) The supplier is offering a special discount and has temporarily reduced his unit price from $10.00 to $9.00. What amount should be purchased to take advantage of the discount? d) The supplier will increase his unit price from $10.00 to $11.00 on 1 January. What amount should purchased and delivered on 31 December before the price increase is effective if the stock position 246 nito? What will be the cont oving of the pocial purohooo

TWM Company purchases 8000 units of product each year at a unit cost of $10.00. The order cos $30.00 per order, and the holding cost per unit per year is $3.00. a) What are the economic order quantity, the total annual cost, the number of orders to place in on year, and the reorder point when the lead time is two weeks? b) What happens to the EOQ if backordering is possible and the stockout cost per unit per year is $1.00? c) The supplier is offering a special discount and has temporarily reduced his unit price from $10.00 to $9.00. What amount should be purchased to take advantage of the discount? d) The supplier will increase his unit price from $10.00 to $11.00 on 1 January. What amount should purchased and delivered on 31 December before the price increase is effective if the stock position 246 nito? What will be the cont oving of the pocial purohooo

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

a) If you are an engineer for an automobile company, the annual requirements for spare parts are 3800 units for the assembly section. The cost of each item is 10 RO and the ordering cost is 0.35 RO. Storage cost is 14 % of an item cost. Find a-i) Economic order quantity. a-ii) Optimum cost. b) In the above problem if the supplier is offering a discount of 18 % of the item cost, the storage cost will increase to 15 %. then, Find: b-i) Economic order quantity; b-ii) Optimum cost. a-i) Economic order quantity a-ii) Optimum cost b-i) Economic order quantity b-ii) Optimum cost
A specialty coffeehouse sells Colombian coffee at a fair rate of 300 kilograms annually. the beans are purchased from a local supplier for $3 per kilogram. the coffeehouse estimates that it costs $50 in paperwork and labor to place an order for the coffee, and holding costs are based on a 10 percent annual interest rate. a. determine the optimal order quantity for Coffee? b. what is the time between the placement of orders? C. what is the average optimal annual cost? d. Suppose the coffee is ordered in a box of 50kg each. how many boxes should the coffee shop order? A- B. 問

If the opening inventory is 400 units, demand is 900 units, and production is 700 units, what will be the ending inventory?
Item A is one of the products manufactured at ABC Manufacturing. • Each order for producing the product has a cost of $300/order, regardless of the number of units ordered. . The lead time for placing the order is 2 week(s). • The inventory cost is $3/unit/week and the on-hand inventory at the beginning of week 1 is 145 units. The gross requirement for Item A is specified for the beginning of weeks 1 through 8 in the table that follows. Item A Week 1 Week 2 Week 3 Week 4 Week 5 Week 6 Week 7 Week 8 60 65 0 90 0 55 95 85 Gross Requirement On-hand Inventory Net Requirement Planned Order Receipt Planned Order Release For a "lot size using Part Period" scheduling policy, determine the total cost for the 8 week period. Assume that inventory is tracked at the beginning of the period. The number of units ordered can be a multiple of the Part Period, depending on the computed net requirement in a week. What is total number of units held in inventory during the planning period (i.e. weeks 1…
A certain job shop specializes in one-of-a-kind orders dealing with parts of medium-to-high complexity. A typical part is processed sequentially through ten machines in batch sizes of one. The shop contains a total of eight conventional machine tools and operates 40 hours per week of production time. Average time values on each part per machine are: Machining time = 0.5 hour; Work handling time = 0.3 hour; Tool change time = 0.2 hour; Setup time = 3 hours; Nonoperation time = 12 hours. A new programmable machine is being considered that can perform all ten operations in a single setup. The programming of the machine for this part will require 20 hours; however, the programming can be done off-line, without tying up the machine. Setup time will be just 2 hours because simpler fixtures will be used. Total machining time will be reduced to 80% of its previous value due to advanced tool control algorithms; work handling time will be the same as for one machine; and total tool change time…
1) A product is made- to- stock. annual demand is 60,000 units. each unit costs $4 and the annual holding cost rate = 25%. setup cost to produce this product is $300. Determine 1-Economic order quantity 2-Total inventory costs for this situation
The BOM for product A is shown in Figure 11.40, and datafrom the inventory records are shown in Table 11.9. In theMPS for product A, the MPS start row has 100 units in week 3and 200 in week 6. Develop the material requirements planfor the next 6 weeks for items C, D, and E.a. Develop the material requirements plan for the next6 weeks for items C, D, and E.b. What specific managerial actions are required inweek 1?
A chemical firm produces sodium bisulfate in 100-pound bags. Demand for this product is 20 tonsper day. The capacity for producing the product is 50 tons per day. Setup costs $100, and storage andhandling costs are $5 per ton a year. The firm operates 200 days a year. (Note: 1 ton = 2,000 pounds.)a. How many bags per run are optimal?b. What would the average inventory be for this lot size?c. Determine the approximate length of a production run, in days.d. About how many runs per year would there be?e. How much could the company save annually if the setup cost could be reduced to $25 per run?
A product line has two models: X and Y. Model X consists of 4 components: a, b, c, and d. The number of processing operations required to produce these four components are 2, 3, 4, and 5, respectively. Model Y consists of 3 components: e, f, and g. The number of pro-cessing operations required to produce these three components are, 6, 7, and 8 respectively.The annual quantity of Model X is 1,000 units and of Model Y is 1,500 units. Determine the total number of components and processing operations associated with these two models.
Q1/ Select the correct answer from the followings: 1. What is a shaping process? a) A type of casting process b) A type of grinding process c) A metal removal process in which reciprocating workpiece is fed against a stationary tool d) A process in which metal is removed by a reciprocating tool fed against a stationary workpiece. 2. Which of the following is the advantage of shaping process? a) Large objects can be machined easily. b) Thin or fragile workpiece can also be machined. c) Lower machining time. d) Higher tool life. 3. Which of the following operation, we can't perform on drilling machine? a) Reaming. b) Tapping. c) Lapping. d) None of the mentioned. 4. The drilling machine was primarily designed to originate a a) Flat surface. b) Cylindrical surface. c) Taper surface. d) None of the mentioned. 5. Lathe bed is usually made of: a) Structural steel. b) Stainless steel. c) Cast iron. d) Mild steel. 6-Internal or external tapers on a turret lathe can be turned by.... a) Face…
B: Iraq Glass Industries Company produces two types of products, A and B, each one goes through two production stages. Product A needs 1 working hour in the first phase, and 4 working hours in the second phase, while Product B needs 2 working hours in the first phase, and 3 hours of work in the second stage. If you know that the profit per unit of product A is $60, and the profit per unit of product B is $50. The available weekly working hours in the first stage are 40 hours, and in the second stage are 120 hours. Required: Building a mathematical model that maximizes the company's profits
1. A certain batch of parts is routed through six machines in a batch production plant. The setup and operation times for each machine are given in the table below. Batch size is 200 and the average nonoperation time per machine is15 hr. Determine (a) manufacturing lead time and (b) hourly production rate for operation 4.Machine 1 2 3 4 5 6Setup time (hr) 5 3 6 4 5 3Operation time (min) 3.0 3.3 8.2 3.9 4.5 2.3 a. 6(4.3+200(3.9/60)+15) = 193.8 hours 24.2 days if 8 hour shiftb. 4(60)+200(3.9)/200 =5.1 hourly production for operation 4 2. Suppose the part in the previous problem is made in very large quantities on a production line in which an automated work handling system is used to transfer parts between machines. Transfer time between stations is 30 sec. total time required to setup the entire line is 102 hr. Assume that the operation times at the individual machines remain the same as in the previous problem, Determine (a) manufacturing lead time for a part coming off the line,…