The simply supported wooden beam shown in Fig. Q4 has a circular cross section with diameter 60 mm and supports a concentrated load of 400 N. Calculate the deflection at points B and D using Double Integration Method. The modulus of elasticity for the beam is given as E = 50 GPa. A 1 m B 1m C 420 N 3 m D 2m OE E

The simply supported wooden beam shown in Fig. Q4 has a circular cross section with diameter 60 mm and supports a concentrated load of 400 N. Calculate the deflection at points B and D using Double Integration Method. The modulus of elasticity for the beam is given as E = 50 GPa. A 1 m B 1m C 420 N 3 m D 2m OE E

Mechanics of Materials (MindTap Course List)

9th Edition

ISBN:9781337093347

Author:Barry J. Goodno, James M. Gere

Publisher:Barry J. Goodno, James M. Gere

Chapter9: Deflections Of Beams

Section: Chapter Questions

Problem 9.3.16P: A simple beam with an overhang is subjected to d point load P = 6kN. If the maximum allowable...

See similar textbooks

Similar questions

A beam of uniform rectangular section 200 mm wide and 300 mm deep is simply supported at its ends. It carries a uniformly distributed load of 9 KN/m run over the entire span of 5 m. if the value of E for the beam material is 1 X 104 N/mm2 , find the slope at the supports and maximum deflection. Give me complete solution based on the given above. Again I need to ask the same question since you gave me a wrong answer before.
On a formatted bond paper, copy and solve the problem. Show your neat and detailed solution. Use three (3) decimal places for your answers and enclosed it in a box. Compute the deflection and slope at a section 8 ft from the wall for the beam shown in the figure using Double Integration Method. Assume that E = 28 x 103 psi and 1= 30.75 1200 lb in4. A 800 lb/ft -8 ft -8 ft B
The beam shown below is subjected to a point load of 10kN, and is supported at both ends by fixed connections. Calculate the deflection at the mid-span of the beam, when El is equal to 9.6x10ºNm². Give your answer in mm to the nearest 2dp. 6m 4m 10KN
For the beam and loading shown, use discontinuity functions to compute: (a) the deflection VA of the beam at A, and (b) the deflection Vmidspan of the beam at midspan (i.e., x = 2.45 m). Assume a constant value of El = 1270 kN-m² for the beam; M₁ = 9 kN-m, wo = 19.8 kN/m, LAB = 1.1 m, LBc = 2.7 m. MA A Answer: (a) VA = (b) Vmid i LAB i Wo B LBC mm. mm.
2. L=3m 16mm dia. E=200GPA W 5 m 5 m I=10x106 mm When the deflection of the rod is 1mm, compute the force P of the rod.
A wooden beam 5 m long, simply supported at its ends and it is carrying a point load of 8 kN at its centre. The cross-section of the beam is 160 mm wide and 270 mm deep. If E for the beam is 70x109 N/m2, the deflection at the centre is
For the beam and loading shown, use the double-integration method to determine (a) the equation of the elastic curve for the beam, (b) the slope at A, (c) the slope at B, and (d) the deflection at midspan. Assume that El is constant for the beam. Let Mo = 50KN-m, L= 4.5 m, E= 180 GPa, and I = 115x 106 mm4. Mo B Answer: (b) 0A = i rad (c) Og = i rad (d) vmid = i mm
The Flexor loading micrometer will be used to load the beam. Calculate the deflection required to bend the beam to the desired strain. Deflection in a cantilever beam b inches wide by t inches thick is: 4PL3 y = Ebt3 %3D (4) where: y= deflection (in), P= force, lbs, L= distance from clamp to loading micrometer (10.0 in), E = Young's modulus for aluminum (10.4E6 psi). %3D %3D Stress at the rosette is given by: Mc/ = 6Px (5) %3D bt2 where: x= the distance from the loading micrometer to the rosette centerline (9.0 in), and P, b and t are as defined above. Using equations (4) and (5) above, determine the deflection required to impose a 15 Kpsi stress in the beam at the gage rosette centerline. What force will be applied by the loading micrometer at 15Kpsi? Do your work in the space below.
A simply supported beam with a length of 4m is loaded with a uniform distributed load (w). The beam has a rectangular hollow section with the following dimensions: Outer Base = 150 mm OuterDepth 200 mm Inner Base = 100 mm Depth = 150 mm Inner Determine the maximum uniformly distributed load which can be applied over the entire length of the beam if the bending stress is limited to 8 Mpa. Please answer with solution and fbd. Thank you.
A 100 mm diameter bar is used as a simply supported beam 4m long. The value of * :uniform distributed load (w) is w Nm n slar shoar dingra Re Mas M Moment 5600 kN/m O 6.5 kN/m 5.6 kN/m O 6500 kN/m Non of them
Determine the deflection at midspan for the beam of Problem 4–69 using Castigliano's theorem. Material of the beam is steel with E=30 Mpsi. w 180 lbf/in 1.375-in dia. r1.375-in dia. Problem 4-69 11.75-in dia. +3 in + 10 in 3 in
For the vertical rod as shown, find the deflection at A and the stress distribution. Use E-100 MPa and weight per unit volume equal to 0.06 N/cm3. (Hint: Introduce weight contribution to the nodal loads and solve using two elements and four elements.) Comment on the stress distribution. a) Use 2 & 4 elements with linear shape functions. b) Use 2 elements with quadratic shape functions. 1.6m C A -Area - 2500 cm² 8 Area - 1500 cm²