the grou Fig. 6.59 shows a uniform boom of mass m = supported by a cable perpendicular to the boom. The boom is hinged at the bottom and an object of mass M= 200 kg hangs from its top. Find the tension in the massless cable and the components of the force exerted on the boom at the hinge. 120 kg 171 65°

the grou Fig. 6.59 shows a uniform boom of mass m = supported by a cable perpendicular to the boom. The boom is hinged at the bottom and an object of mass M= 200 kg hangs from its top. Find the tension in the massless cable and the components of the force exerted on the boom at the hinge. 120 kg 171 65°

Physics for Scientists and Engineers: Foundations and Connections

1st Edition

ISBN:9781133939146

Author:Katz, Debora M.

Publisher:Katz, Debora M.

Chapter14: Static Equilibrium, Elasticity, And Fracture

Section: Chapter Questions

Problem 33PQ: Problems 33 and 34 are paired. One end of a uniform beam that weighs 2.80 102 N is attached to a...

See similar textbooks

Similar questions

Problems 33 and 34 are paired. One end of a uniform beam that weighs 2.80 102 N is attached to a wall with a hinge pin. The other end is supported by a cable making the angles shown in Figure P14.33. Find the tension in the cable. FIGURE P14.33 Problems 33 and 34.
A 1204-N uniform beam is attached to a vertical wall at one end and is supported by a cable at the other end A 1515-N crate hangs from the far end of the beam. Find the magnitude of the tension in the wire. The angle theta (9) is 29 degrees and the angle phi () is 53 degrees. The length of the beamis L Вeam ROUND OFF FINAL ANSWER TO THE NEAREST WHOLE NUMBER. INPUT THE SYMBOL OF THE UNIT. NO SPACE BETWEEN THE NUMBER AND THE UNIT.
35.0° Dinysics Demos SuDDly Co. The pole is held horizontally by a massless wire under 305 N of tension, connected at a 35° angle. A 8 kg sign hangs from the end of the 4 meter pole. The pole has mass 4 kg. How far away is the wire is attached from the wall? Answer in meters to 3 sig figs.
A 1220N uniform boom is supported by a cable perpendicular to the boom, as seen in the figure below. The boom is hinged at the bottom, and an m=2120N weight hangs from its top. Assume the angles to be a=60.7deg and 0=(90.0°- a). Ꮎ Ө ja m Find the tension in the supporting cable. Submit Answer Tries 0/10 Find the x-components of the reaction force exerted on the boom by the hinge (choose to the right as positive). Submit Answer Tries 0/10 Find the y-components of the reaction force exerted on the boom by the hinge (choose upwards as positive). Submit Answer Tries 0/10
2.30 m long and has a mass m = 15.0 kg. It leans at rest against a smooth wall making an angle 0 = 29.0° with the wall as shown on the left. The coefficient of static friction between the floor and the ladder is u, = 0.675, while the coefficient of kinetic friction is u, = 0.439. What is the 2. A ladder is L force between the wall and the ladder? Hsi Hk
A sculptor has hung up a 45.0 kg horizontal rod of length 4.85 m . One end of the rod is supported by a pivot, and the other end is held up by a wire. The wire makse a 30.0 ∘ angle with the rod. If tension greater than 1450 N would snap the wire, what is the maximum distance from the pivot that a 68.0 kg person can sit on the rod? r=________m
A uniform drawbridge must be held at a 38o angle above the horizontal to allow ships to pass underneath. The drawbridge weights 55000 N and is 15.0 m long. A cable is connected 3.5 m from the hinge where the bridge pivots (measured along the bridge) and pulls horizontally on the bridge to hold it in place. What is the tension in the cable? Find the magnitude and direction of the force the hinge exerts on the bridge. If the cable suddenly breaks, what is the magnitude of the angular acceleration of the drawbridge just after the cable breaks? What is the angular speed of the drawbridge as it becomes horizontal? What is the velocity of the drawbridge, just before it “hits” (i.e. goes horizontal)?
The uniform boom shown below weighs 644 N, and the object hanging from its right end weighs 416 N. The boom is supported by a light cable and by a hinge at the wall. 45° 20° 416 N Calculate the tension in the cable and the force by the hinge on the boom (both in N). (Enter the magnitudes.) tension in the cable 787.738 N force by the hinge 812.122 N
A window washer is standing on a scaffold supported by avertical rope at each end. The scaffold weighs 200 N and is3.00 m long. What is the tension in each rope when the 700-Nworker stands 1.00 m from one end?
A 350 N uniform boom is supported by a perpendicular cable attached at 0.7 its length from the boom’s hinge on the floor and makes a angle of 60° with the horizontal floor. At the top end of the boom is attached a 1050 N weight. What is the tension in the supporting cable?
A 500.-N uniform rectangular sign 4.00 mwide and 3.00 m high is suspended from ahorizontal, 6.00-m-long, uniform, 100.-N rodas indicated in Figure P8.25. The left end ofthe rod is supported by a hinge, and the rightend is supported by a thin cable making a30.0° angle with the vertical. (a) Find the tensionT in the cable. (b) Find the horizontaland vertical components of force exerted onthe left end of the rod by the hinge.
A 550 ?? drawbridge has a hinge at one end and a cable attached to the other. It is stuck in a positionwhere it makes an angle of 30° with the vertical. The cable pulling on the far end of the bridge is horizontal.Find the tension in the cable as well as the vertical and horizontal components of force from the hinge.Hint 1: Be careful with your ???? terms in this problem. Drawing a good picture should help.Hint 2: The length of the bridge will cancel out. Just use ?.