Reflection by thin layers. In the figure, light is incident perpendicularly on a thin layer of material 2 that lies between (thicker) materials 1.and 3. (The rays are tilted only for clarity.) The waves of rays r1 and r2 interfere, and here we consider the type of interference to beeither maximum (max) or hinimum (min). The table below provides the indexes of refraction n1, n2, and n3, the type of interference,and the thinlayer thickness Lin nanometers. Give the wavelength that is in the visible range.n1n2n3Type L A1.591.37 1.45min416Numberi2.28e+3Unitsnm

The data given in the question is as follows: 1.Refractive index of material 1, n1=1.59 2.…

Reflection by thin layers. In the figure, light is incident perpendicularly on a thin layer of material 2 that lies between (thicker) materials and 3. (The rays are tilted only for clarity.) The waves of rays r and r2 interfere, and here we consider the type of interference to be either maximum (max) or rhinimum (min). The table below provides the indexes of refraction n1, n2, and n3, the type of interference, and the thinlayer thickness L in nanometers. Give the wavelength that is in the visible range. n1 n2 n3 Type L A 1.59 1.37 1.45 min 416 Number i 2.28e+3 Units nm

Reflection by thin layers. In the figure, light is incident perpendicularly on a thin layer of material 2 that lies between (thicker) materials and 3. (The rays are tilted only for clarity.) The waves of rays r and r2 interfere, and here we consider the type of interference to be either maximum (max) or rhinimum (min). The table below provides the indexes of refraction n1, n2, and n3, the type of interference, and the thinlayer thickness L in nanometers. Give the wavelength that is in the visible range. n1 n2 n3 Type L A 1.59 1.37 1.45 min 416 Number i 2.28e+3 Units nm

Physics for Scientists and Engineers: Foundations and Connections

1st Edition

ISBN:9781133939146

Author:Katz, Debora M.

Publisher:Katz, Debora M.

Chapter38: Refraction And Images Formed By Refraction

Section: Chapter Questions

Problem 92PQ

See similar textbooks

Similar questions

= Two light rays (1 and 2) travelling in air (na : 1) from source S (1 m above the surface of water) and meet at a point P on a screen (1 m above the surface of water), as shown below. Light ray 2 reflects from the surface of water (nw 1.33). Determine: = i. the phase difference of the light rays at point P, if wavelength of the light is 500 nm. ii. for what wavelengths we will have constructive interference at P? S Ray 1 Ray 2 Air 2 m Water 1 m
A beam of white light is incident on the surface of a diamond at an angle a.( Figure 1) Since the index of refraction depends on the light's wavelength, the different colors that comprise white light will spread out as they pass through the diamond. The indices of refraction in diamond are nred= 2.410 for red light and nblue = 2.450 for blue light. The surrounding air has nair = 1.000. Note that the angles in the figure are not to scale. Figure Oplue Ored α 1 of 1 Part A Calculate vred, the speed of red light in the diamond. To four significant figures, c = 2.998 × 108 m/s. Express your answer in meters per second to four significant digits. VE ΑΣΦ Ured= Submit Part B Ublue = Submit Part C Calculate blue, the speed of blue light in the diamond. To four significant figures, c = 2.998 × 108 m/s. Express your answer in meters per second to four significant digits. —| ΑΣΦ Request Answer 8 = Submit 2 Request Answer ? ? m/s ? Derive a formula for S, the angle between the red and blue…
Incident white light in air (nair=1) encounters a a piece of plastic as shown in the figure below. The index of refraction for blue light is ng=1.36 and the index of refraction for red light is nr=1.28. After the light passes through the fırst boundary, the blue light undergoes total internal reflection when it encounters the plastic to air boundary from the inside at exactly the critical angle. The red light gets refracted when it encounters the plastic to air boundary from the inside. a) Draw and label a qualitative ray diagram for the light rays for the whole process. b) Find the incident angle of the white light. (you have to really think about what is incident and what is transmitted) c) Using the result from (b), find the angle the red light exits the plastic (no additional points will be taken off if your first result is incorrect). n. 'air
A ray of light with wavelength 400m passes in a block of ice with n=1.40 that is surroinded by air. 1. What is the min angle for ray 2 that should creatr total intrnl reflectjon (the critical angle). 2. To get critical angle for ray 2, what is the angle of ray 1. 3. What is the energy of the light.
A plastic bubble of thickness 102 nm has its strongest (m = 1) reflection maximum at 604 nm. What is the index of refraction n for the bubble? (Hint: If you leave the wavelength in nm, the answer will be in nm. No conversion necessary.) (No unit.)
Which of the following pairs of materials will cause incident light in the first material to have a 180° phase change when it is reflected off the second material? Mark all that apply. Sodium chloride (n = 1.54) to glass (n = 1.66) %3D %3D Water (n = 1.33) to quartz (n = 1.54) C) Fluorite (n = 1.43) to water (n = 1.33) %3D Plexiglass (n = 1.51) to ice (n = 1.31)
A beam of white light is incident on the surface of a diamond at an angle 8 (Eigure 1) Since the index of refraction depends on the light's wavelength, the different colors that comprise white light will spread out as they pass through the diamond. The indices of refraction in diamond are Theed 2.410 for red light and The 2.450 for blue light. The surrounding air has 1.000. Note that the angles in the figure are not to scale. Figure Pred 1011 Calculated the speed of red light in the diamond. To four significant figures, c2.998 x 10 m/s. Express your answer in meters per second to four significant digits. Η ΑΣΦΑ Vied Submit Part B Request Answer Submit Calculate th the speed of blue light in the diamond. To four significant figures, e 2.998 x 10 m/s. Express your answer in meters per second to four significant digits. Η ΑΣΦ m/s Bequest Answer Review
A scuba diver stands at the bottom of a lake that is 16 m deep. What is the distance to the closest points at the bottom of the lake that the diver can see due to light from these points being totally reflected by the water surface? The height of the diver is 1.9 m and n-water = 1.33. (Please provide a diagram and steps.)
Chapter 34, Problem 003 In the figure, an isotropic point source of light S is positioned at distance d from a viewing screen A and the light intensity Ip at point P (level with S) is measured. Then a plane mirror M is placed behind S at distance 1.3d. By how much is Ip multiplied by the presence of the mirror? M - 1.3d --d- Number Units Use correct number of significant digits; the tolerance is +/-2%
Two flat plates of glass with parallel faces are on a table, one plate on the other. Each plate is 11.2 cm long and has a refractive index of 1.55. A very thin sheet of metal foil is inserted under the end of the upper plate to raise it slightly at that end, in a manner similar to that pictured in the figure (Figure 1). When you view the glass plates from above with reflected white light, you observe that, at 1.10 mm from the line where the sheets are in contact, the violet light of wavelength 410 nm is enhanced in this reflected light, but no visible light is enhanced closer to the line of contact. Figure 1 of 1 Part A How far from the line of contact will green light (of wavelength 540 nm) first be enhanced? Express your answer in millimeters. —| ΑΣΦ ¤ green, 1 = Submit Part B Corange, 1 = Request Answer Submit How far from the line of contact will orange light (of wavelength 610 nm) first be enhanced? Express your answer in millimeters. 15. ΑΣΦ Request Answer Part C Complete…
Light consisting of a mixture of red and blue light enters a 40°, 70°, 70° prism along a line parallel to the side opposite the 40° vertex (see figure below). The index of refraction of the prism material for blue light is 1.530, and for red light it is 1.525. What is the angle between the two emerging beams of light? 40
White light is incident from air onto a triangular prism at a 55.0º angle with respect to the normal. The prism has an index of refraction of 1.45 for red light and 1.50 for violet light and the apex angle of the prism is 60º. Take nair=1.00 for all wavelengths.a) What is the angular separation (dispersion angle) of the two ends of the visible spectrum while in the prism? b) What is the angular separation (dispersion angle) of the two ends of the visible spectrum upon exiting the prism?