4015016020R201220403014FRONTFig. 10: Angle block. Material: Cast iron. Unit: mm1618251057625092-013 Referring to the object in Fig. 10, sketch the front,left, and section view following third angleprojection rule. The section view must showdiameter and depth of the Ø20 hole.mInclude the part name, material, and unitAll holes are through the part thicknessInclude dimensions of the 3 holes whileignoring other dimensions and scaleUse a square-grid paper and include alllines.No computer plot, please!

(1) Analysis of ProblemTake a close look at the provided figure and understand the object's…

Referring to the object in Fig. 10, sketch the front, left, and section view following third angle projection rule. The section view must show diameter and depth of the Ø20 hole. Include the part name, material, and unit All holes are through the part thickness Include dimensions of the 3 holes while ignoring other dimensions and scale Use a square-grid paper and include all lines. No computer plot, please!

Referring to the object in Fig. 10, sketch the front, left, and section view following third angle projection rule. The section view must show diameter and depth of the Ø20 hole. Include the part name, material, and unit All holes are through the part thickness Include dimensions of the 3 holes while ignoring other dimensions and scale Use a square-grid paper and include all lines. No computer plot, please!

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Draw, using 1 st angle projection Orthographic view of the following figure with suitable scale, the following views: (a) the given front elevation; (b) a top view (c) side elevation (d) an isometric view of the block. Show all hidden details. Print scale and show six leading dimensions Note : use creo PARAMETRIC to figure out
Draft and annotate the 2D sketch of cover using AutoCAD and mention all the dimensions. Colour the hatched lines which are inside the curve 8R 6 holes 8 Dia 62 Dia 18 R 3 holes 20 Dia 110 Cover 40 Dia 100 R
Draw front and right-side views of the following object with a completed dimensions. Draw in scale 1:1 on A4 sheet. (Problem is taken from "Graphics for Engineers' by Earle) 78 What can we learm from the drawlng ? 1. The dimension note M10x1.5 means that the hole is a threaded hole. R16 O 16, 2 Holes The letter 'M' means that the threads are made by following a metric thread system. The number "10" Is the major dlameter of the hole and the number 1.5 is the pitch of a thread. However, for coarse threads, it is a common practice to omit specifying the pitches. For example, a note M10 means the pitches of the thread is 1.5 mm. In this book, the pitch is specified in order to facilitate drafting. 2. Drawing symbol of a threaded hole is shown below. - Thin Ine (4H pench The ends of this arc does not meet together but approximately 90 degs, apart. Object Ihe (2i pencil .major dlameter pich2 M10x1 5 3. The circular projection surface at a threaded hole that is raised from a cylinder is…
Draw an orthographic drawing in a title block using 3d angle projection techniques for the isometric diagram in Figure 2, with X is taken as the front view. Also, create a section view taking A-B as the cutting plane. Show any detail where necessary and fully dimension your drawing. 60 60 35 75 中40 60 25 R23 Figure 2: Isometric drawing of an anchor bracket (unit is in mm) 09 15
AutoCAD Sketching The given sketch is a cross section view of housing. Sketch the 2D sketch of the below figure using AutoCAD. Note: color the hatching if there any and mention the dimensions and reference lines 58 8 holes 10 Dia 40 Dia 15R 16 20R 58 Dia 20R 6 holes 8la 40 40 Housing 22
Sketch the 2D figure of cover using AutoCAD and mention all the dimensions, colour the hatched lines if there any. 80 Dia 8 42 106 22 42 16 24 R 16 R 80 Cover
Draw the three projections of the body in Figure 1- using AutoCAD 1-Do not write the dimensions on the drawing 2- Draw with the same measurements as shown 3 -Show graphics properties At least properties are required for the circle and arc R10 R20 40 35 55 -1- JSI 9.
The given sketch is a view of modified “Plate" one view. Sketch the 2D sketch of the below figure using AutoCAD. Note: Color the hatching if there any and mention the dimensions and reference lines 8holes 10 Dia 60 Dia 96 R 42 R 36 42R 16 80 Plate 85
Draw the SECTION VIEW for Figure 1 with the scale 1:1 on the new drawing paper using all the method on section. Dimension must be included. All dimension in mm. You are require to draw again the top view and then A-A section.
Create the following drawing in autocad. Please show Layers and Dimensions.
Help needed in sketching thanks Several of the problems are not dimensioned. Use 5mm grid spacing and 10mm spacing between views. Please use the following dimensions in your solutions:
52 What is the distance between the center of circle A and the corner at B? R3 03 Start a new drawing based on Mech-Millimeters.dwt. Draw the object shown in Figure A-1, starting with the center of the Ø3 circle at point 5,5. Draw only the object, not the dimensions and then answer the following questions: O 186794 198628 193132 171870 R1.0 TYP. 18 8 2 2 1 10