Question 4. New December 18, 2020. The nitrite in a series of standard solutions (mg/L, n = 5) are converted to azo dye and the slope of the calibration curve is 2.0 ppm1. A 10.00-mL mineral water sample is treated in the same way as standards and diluted to a final volume of 100.00-mL. It gives an absorbance of 0.80. The absorbance of blank solution under the same conditions is 0.10. Calculate ppm (mg/L) of NO, (46 g/mol) and the molarity of NaNO2 (69 g/mol) in the original sample

Question 4. New December 18, 2020. The nitrite in a series of standard solutions (mg/L, n = 5) are converted to azo dye and the slope of the calibration curve is 2.0 ppm1. A 10.00-mL mineral water sample is treated in the same way as standards and diluted to a final volume of 100.00-mL. It gives an absorbance of 0.80. The absorbance of blank solution under the same conditions is 0.10. Calculate ppm (mg/L) of NO, (46 g/mol) and the molarity of NaNO2 (69 g/mol) in the original sample

Chemistry & Chemical Reactivity

10th Edition

ISBN:9781337399074

Author:John C. Kotz, Paul M. Treichel, John Townsend, David Treichel

Publisher:John C. Kotz, Paul M. Treichel, John Townsend, David Treichel

Chapter4: Stoichiometry: Quantitative Information About Chemical Reactions

Section4.9: Spectrophotometry

Problem 3.1ACP

See similar textbooks

Similar questions

An unknown sample containing mixed alkali (NAOH, NaHCO3, or NazCO3) was analyzed using the double flask method. A 250 mg sample was dissolved in 250 mL CO, free water. A 20.0 mL aliquot of this sample required 11.3 mL of 0.009125 M HCI solution to reach the phenolphthalein end point. Another 29.0 mL aliquot of the sample was titrated to the bromocresol green endpoint using 311 mL of the standard acid. What is/are the component/s of the sample? O Cannot be determined O NAHCO3 only O NAOH and Na,CO3 O NazCO3 only O NAHCO, and Na2CO3
An unknown sample containing mixed alkali (NAOH, NaHCO3, or NazCO3) was analyzed using the double flask method. A 250 mg sample was dissolved in 250 mL CO, free water. A 20.0 mL aliquot of this sample required 11.3 mL of 0.009125 M HCI solution to reach the phenolphthalein end point. Another 29.0 mL aliquot of the sample was titrated to the bromocresol green endpoint using 31.1 mL of the standard acid. What is/are the component/s of the sample? O NazCO3 only NaHCO3 only O NAHCO3 and Na>CO3 NaOH and NazCO3 O Cannot be determined
A 0.5131-g sample that contains KBr (MM: 119.0023) is dissolved in 50 mL of distilled water. Titrating with 0.04614 M AgNO3 requires 25.13 mL to reach the Mohr end point. A blank titration requires 0.65 mL to reach the same end point. Report the %w/w KBr in the sample.
I did an experiment: Molar concentration of Fe (NO3)3=.002 Molar concentration of NaSCN= .002 On my 1st trial: Volume of Fe(NO3)3 = 5 mL Moles of Fe3+, initial (mol) = 1 x 10-5 Volume of NaSCN (mL)= 1 mL Moles of SCN-,initial (mol)= 2 x 10-6 Absorbance was .08 Now trying to find Calculation of Kc I already found [FeNCS2+] equilibrium, from calibration curve (mol/L)= 2.25 x 10-5 Now I need to know: 1. moles FeNCS2+ at equilibrium (10mL) (mol) 2. moles Fe3+, reacted (mol) 3. moles Fe3+, equilibrium (mol) 4. [Fe3+] equilibrium, unreacted, 10 mL (mol/L) 5. moles SCN-, reacted (mol) 6. Moles SCN-, equilibrium (mol) 7. [SCN-] equilibrium (unreacted) 10 mL (mol/L) Feel free to just give me the formula to find these. Or to charge me 2 or 3 questions if I asked too much. Thank you!!!!!!
An unknown sample containing mixed alkali (NAOH, NaHCO3, or NazCO3) was analyzed using the double flask method. A 250 mg sample was dissolved in 250 mL CO2 free water. A 20.0 mL aliquot of this sample required 11.3 mL of 0.009125 M HCI solution to reach the phenolphthalein end point. Another 29.0 mL aliquot of the sample was titrated to the bromocresol green endpoint using 31.1 mL of the standard acid. How many millimoles of the components are there in the original solid sample? O 0.28 mmol Na,CO3 O 1.29 mmol NaOH, 0.97 mmol Na2CO3 O 0.103 mmol NaOH, 0.078 mmol NazCO3 O 1.29 mmol Na2CO3, 0.97 mmol NaHCO3 O Cannot be determined
In how much volume of diluted sulfuric acid should you dissolve a multivitamin tablet of approximately 1700 mg of Vitamin C to back analyze 10.00 mL of that solution, with 25.00 mL of 0.01 M KIO3 and 0.04 M thiosulfate to use approximately 8-10 mL of titrant ? You have 25, 50, 150, 250 and 500 mL flasks.
10-27. A 10.231-g sample of window cleaner containing ammonia was diluted with 39.466 g of water. Then 4.373 g of solution were titrated with 14.22 mL of 0.106 3 M HCl to reach a bromocresol green end point. (a) What fraction of the 10.231-g sample of window cleaner is contained in the 4.373 g that were analyzed? (b) How many grams of NH3 (FM 17.031) were in the 4.373-g sample? (c) Find the weight percent of NH3 in the cleaner.
An unknown sample containing mixed alkali (naoh, nahco3, or na2co3) was analyzed using the double flask method. a 250 mg sample was dissolved in 250 ml co2 free water. a 20.0 ml aliquot of this sample required 11.3 ml of 0.009125 m hcl solution to reach the phenolphthalein end point. another 29.0 ml aliquot of the sample was titrated to the bromocresol green endpoint using 31.1 ml of the standard acid. how many millimoles of the components are there in the original solid sample
5. A 300.0 mg sample containing Na,CO3, NaHCO3 and NaOH and inert material either alone or in some combination was dissolved and titrated with 0.1000 M HCI the titration required 24.41 mL to reach the phenolphthalein endpoint. And an additional 8.67 mL to reach the methyl red endpoint. Determine the composition of the sample and calculate the percent of each titrated component.
Treatment of ammonia with phenol in the presence of hypochlorite yields indophenol, a blue product that absrobs light at 625 nm, which çan be used for the spectrophotometric determination of ammonia. gan OCF OH + NH3 indophenol anion To determinè the ammonia concentration in a sample of lake water, three samples are prepared. In sample A, 10.0 mL of lake water is mixed with 5 mL of phenol solution and 2 mL of sodium hypochlorite solution, and diluted to 25.0 mL in a volumetric flask. In sample B, 10.0 mL of lake water is mixed with 5 mL of phenol solution, 2 mL of sodium hypochlorite solution, and 2.50 mL of a 5.50 x 10-4 M ammonia solution, and diluted to 25.0 mL. Sample C is a reagent blank. It contains 10.0 mL of distilled water, 5 mL of phenol solution, and 2 mL of sodium hypochlorite solution, diluted to 25.0 mL. The absorbance of the three samples is then measured at 625 nm in a 1.00 cm cuvette. The results are shown in the table. Sample Absorbance (625 nm) A 0.361 B 0.608 C…
A procedure7 for determining halogens in organic compounds uses an argentometric titration. To 50 mL50 mL of anhydrous ether is added a carefully weighed sample (10−100 mg)(10−100 mg) of unknown, plus 2 mL2 mL of sodium dispersion and 1 mL1 mL of methanol. (Sodium dispersion is finely divided solid sodium suspended in oil. With methanol, it makes sodium methoxide, CH3O−Na+,CH3O−Na+, which attacks the organic compound, liberating halides.) Excess sodium is destroyed by slowly adding 2‑propanol, followed by 100 mL100 mL of water. (Sodium should not be treated directly with water because H2H2 can explode in the presence of O2O2: 2Na+2H2O⟶2NaOH+H2.)2Na+2H2O⟶2NaOH+H2.) This procedure gives a two‑phase mixture, with an ether layer floating on top of the aqueous layer that contains the halide salts. The aqueous layer is adjusted to pH 44 and titrated with Ag+,Ag+, using the electrodes in Figure 7‑5.How much 0.02916 M AgNO30.02916 M AgNO3 solution will be required to reach each equivalence…
In a Complexometric Titration Experiment, the preparation of the EDTA solution is as follows: In a 250 mL beaker, weigh 0.10 g MgCl2*6H2O and 1.0 g NaOH. Add approximately 200 mL distilled water and stir to dissolve. Add about 2.0 g of EDTA and transfer the solution quantitatively to a 1-L volumetric flask. Dilute to the mark with distilled water. What is the purpose of adding MgCl2*6H2O? Please show COMPLETE solution.