please provide step by step solutions and draw the lever on the graph as well. i know the answers. (c) About 1250 C (d) Fe3C, cementite (e) About 0.7 wt% C, about 72% (f) About 40%, no. (h) Draw the microstructure of a 1.5 wt.% C material that has been heated to 1200 C and then slowly cooled to 600 C. Clearly label all phases. (c) What is the melting point of Fe³C?(d) Name the intermetallic compound that appears on this phase diagram.(e) What is the composition of the solid phase of a 1 wt.% C material held at1400 °C? How much austenite is present in this composition?(f) What percentage of the microstructure of a 3 wt.% C material at 1146 °Cexists as eutectic? Is this material a type of steel?(g) Is carbon more soluble in austenite or ferrite? Explain why in detail.(h) Draw the microstructure of a 1.5 wt.% C material that has been heated to1200 °C and then slowly cooled to 600 °C. Clearly label all phases.

To draw phase drawing to explain the details about microstructures

please provide step by step solutions and draw the lever on the graph as well. i know the answers. (c) About 1250 C (d) Fe3C, cementite (e) About 0.7 wt% C, about 72% (f) About 40%, no. (h) Draw the microstructure of a 1.5 wt.% C material that has been heated to 1200 C and then slowly cooled to 600 C. Clearly label all phases.

please provide step by step solutions and draw the lever on the graph as well. i know the answers. (c) About 1250 C (d) Fe3C, cementite (e) About 0.7 wt% C, about 72% (f) About 40%, no. (h) Draw the microstructure of a 1.5 wt.% C material that has been heated to 1200 C and then slowly cooled to 600 C. Clearly label all phases.

Materials Science And Engineering Properties

1st Edition

ISBN:9781111988609

Author:Charles Gilmore

Publisher:Charles Gilmore

Chapter6: Introduction To Mechanical Properties

Section: Chapter Questions

Problem 6.8P

See similar textbooks

Similar questions

subject: Material Engineering Using the given sheet for the Ni-Ti Phase diagram, how many phase fields appear in the diagram and write down the weight fraction of gamma phase for an alloy containing 43% wt of Ti at 1000 C
A steel alloy is known to contain 93.8 wt% Fe, 6.0 wt% Ni, and 0.2 wt% C. Assume that there are no alterations in the positions of other phase boundaries with the addition of Ni. (a) What is the approximate eutectoid temperature of this alloy? i °C (b) What is the proeutectoid phase when this alloy is cooled to a temperature just below the eutectoid? (c) Compute the relative amounts of the proeutectoid phase and pearlite. i Wp i
Which one of the following is NOT a way minerals form? O Compression of organic material on the surface Precipitation from solution Crystallization from magma Biological precipitation by organisms
3.11 Each of the following statements describes a silicate mineral or mineral group. In each case, provide the appropriate name. a- The most common member of the amphibole group. b- The most common non ferromagnesian member of the mica family. c- The only silicate mineral made entirely of silicon and oxygen. d- A high-temperature silicate with a name that is based on its color. e-Characterized by striations. f- Originates as a product of chemical weathering.
View Policies Current Attempt in Progress Using the Animated Figure 10.40, the isothermal transformation diagram for a 0.45 wt% C steel alloy, specify the nature of the final microstructure (in terms of the microconstituents present) of a small specimen that has been subjected to the following temperature treatments. In each case assume that the specimen begins at 845 °C and that it has been held at this temperature long enough to have achieved a complete and homogeneous austenitic structure. a) Rapidly cool to 700 degrees C, hold for 100,000 s, then quench to room temperature. b) Rapidly cool to 450 degrees C, hold for 10 s, then quench to room temperature. proeutectoid ferrite + pearlite proeutectoid ferrite + martensite proeutectoid ferrite + pearlite + martensite eT proeutectoid ferrite + pearlite + bainite + martensite all spheroidite Save all bainite Attempts: 0 of 5 used Submit Answer all martensite bainite + martensite
Q.1. For hypereutectoid plain carbon steel (select %C content yourself), determine the phases that are present, the compositions of these phases, and the percentages or fractions of the phases. Make schematic sketches of the microstructure that would be observed for conditions of very slow cooling at the following temperatures: a) Just above the austenite transformation temperature b) The austenite transformation temperature 10°C c) The eutectoid transformation temperature +10°C d) The eutectoid transformation temperature 10°C
The following information is given for cadmium at 1atm: boiling point = 765 °C Hvap(765 °C) = 100 kJ/mol melting point = 321 °C Hfus(321 °C) = 6.11 kJ/mol specific heat solid= 0.230 J/g°C specific heat liquid = 0.264 J/g°C __________kJ are required to melt a 31.0 g sample of solid cadmium, Cd, at its normal melting point.