Learning Goal: A box of mass 3.0 kg slides down a rough vertical wall. The gravitational force on the box is 29.4 N. When the box reaches a speed of 2.5 m/s, you start pushing on one edge of the box at a 45° angle (use degrees in your calculations throughout this problem) with a constant force of magnitude F₂ = 23.0 N, as shown in (Figure 1). There is now a frictional force between the box and the wall of magnitude 13.0 N. How fast is the box sliding 2.4 s after you started pushing on it? Figure 45° 1 of 1

Learning Goal: A box of mass 3.0 kg slides down a rough vertical wall. The gravitational force on the box is 29.4 N. When the box reaches a speed of 2.5 m/s, you start pushing on one edge of the box at a 45° angle (use degrees in your calculations throughout this problem) with a constant force of magnitude F₂ = 23.0 N, as shown in (Figure 1). There is now a frictional force between the box and the wall of magnitude 13.0 N. How fast is the box sliding 2.4 s after you started pushing on it? Figure 45° 1 of 1

Name: Learning Goal:A box of mass 3.0 kg slides down a rough vertical wall.
Uploaded: 2024-03-20T06:57:25.000Z
Channel: Bartleby
Description: Learning Goal:A box of mass 3.0 kg slides down a rough vertical wall. The gravitational force on the box is29.4 N. When the box reaches a speed of 2.5 m/s, you start pushing on one edge of thebox at a 45° angle (use degrees in your calculations thro

College Physics

11th Edition

ISBN:9781305952300

Author:Raymond A. Serway, Chris Vuille

Publisher:Raymond A. Serway, Chris Vuille

Chapter1: Units, Trigonometry. And Vectors

Section: Chapter Questions

Problem 1CQ: Estimate the order of magnitude of the length, in meters, of each of the following; (a) a mouse, (b)...

See similar textbooks

Similar questions

The pulley system shown in the figure is used to lift a m= 67-kg crate. Note that one chain connects the upper pulley to the ceiling and a second chain connects the lower pulley to the crate. Assume the masses of the chains, pulleys, and ropes are negligible. Determine the force F required to lift the crate with constant speed. Determine the tension in the upper chain. Determine the tension in the lower chain.
The following figure and situation are to be used for questions 1 to 4. An object, attached at the origin, point O, is being pulled by three ropes, A, B, and C, as shown in the figure. The tension produced in these ropes are as follows: TOA: 1 500 N, along the x-y plane, 36.9" from the positive x-axis, and 53.1 from the positive y-axis ToB: -800i +800j+400k N Toc: 1 697 N, pointing towards (-1,1,-4) N B y 0 C (-1,1,-4) 36.9° A
wo blocks of masses m and 2m are held in equilibrium on a frictionless incline as in the figure. In terms of m and θ, find the following. (Use any variable or symbol stated above along with the following as necessary: g.) An inclined plane makes an angle θ with the horizontal. One end of a cord labeled T2 is attached to place near the top of the inclined plane, and the other end of the cord is attached to the uphill side of a block of mass m1 that is resting on the incline. A second cord, labeled T2, is attached to the downhill side of the block of mass m, and the other end is attached to the uphill side of a block of mass 2m, which is near the bottom of the incline. (a) the magnitude of the tension T1 in the upper cordT1 = (b) the magnitude of the tension T2 in the lower cord connecting the two blocksT2 =
Two blocks are connected by a string that goes over an ideal pulley as shown in the figure and pulls on block A parallel to the surface of the plane. Block A has a mass of 3.00 kg and can slide along a rough plane inclined 30.0 degrees to the horizontal. The coefficient of static friction between block A and the plane is 0.400. What mass should block B have in order to start block A sliding up the plane? ANSWER FORMAT: space EXAMPLE: 10.0 N В 30.0°
Constants At a construction site, a 60.0 kg bucket of concrete hangs from a light (but strong) cable that passes over a light friction-free pulley and is connected to an 85.0 kg box on a horizontal roof (see the figure (Figure 1)). The cable pulls horizontally on the box, and a 50.0 kg bag of gravel rests on top of the box. The coefficients of friction between the box and roof are shown. The system is not moving. Part A Find the friction force on the bag of gravel. Express your answer in newtons. V AEO ? Fbag = N Submit Request Answer Part B Find the friction force on the box. Express your answer in newtons. Figure < 1 of 1 HV ΑΣφ ? For = Gravel Box Submit Request Answer |- us = 0.700 Part C Mk = 0.400 Suddenly a worker picks up the bag of gravel. Use energy conservation to find the speed of the bucket after it has descended 2.50 m from rest. (You can check your answer by solving this problem using Newton's laws.) Concrete Express your answer in meters per second.
A window washer pushes his scrub brush up a vertical window at constant speed by applying a force F⃗ as shown in (Figure 1). The brush weighs 13.9 N and the coefficient of kinetic friction is μk = 0.140. Calculate the magnitude of the force F⃗ . F = ? Calculate the normal force exerted by the window on the brush. n = ?
Problem#2 Questions: 2. Two masses were connected by a frictionless pulley and is placed in an inclined plane with kinetic friction coefficient of u=0.2 as shown in figure below. If we let mass m2 to move at a constant speed downwards, give the following: a. Draw the FBD and write the summation of all forces acting on the masses. b. Solve for mass m2 if mass mi = 4kg. c. Find the tension force of the string. Problem#2: * Direction: Please indicate your name and section in every photo of your answers. Encircle your final answers. m1 m2 30° 45°
Minimum drag occurs at the mimimum value of the following equation D = СD+aС² CL Where D is the drag, C₁, the coefficient of lift and CD, k are constants Define the value of C₁ for which the minimum value of drag occurs. Then calculate this value for CD = 0.8 and a = 6.19 Give your answer to 3 decimal places.
A 65.0-kg file cabinet is sliding down a rough ramp for a distance of 5.00 m from rest as shown. The friction force on the box is 75.0 N. What is the final kinetic energy of the cabinet at the end of the ramp, in Joules? Use g = 10.0 m/s². Your answer needs to have 3 significant figures, including the negative sign in your answer if needed. Do not include the positive sign if the answer is positive. No unit is needed in your answer, it is already given in the question statement. 5.0 m 15.0⁰
(Newton's laws and their applications) A block with mass m1 slides down an inclined plane whose angle is 22°, the coefficient of kinetic friction between the block and the plane is 0,250. The block is attached to an ideal rope that passes through two ideal pulleys until it is attached to a fixed support, as shown in 3 figure 3. A rope leaves the axis of the movable pulley up to a block of mass m2 =-m1. 2 m2 Figure 3. Diagram of exercise 3 A. Draw one free-body diagram for each of the two blocks and another for the movable pulley.
A conical pendulum has length I and the angle made by the string with vertical is 0 = 20° . The mass of the object is m=179 g. If the speed of the object is v=3.6m/s find the length of the string. Take g=10m/s2. Round your answer to one decimal place. m
In the (Figure 1) the coefficient of static friction between mass mAmA and the table is 0.50, whereas the coefficient of kinetic friction is 0.10. Ignore masses of the cord and the (frictionless) pulley. What minimum value of mAmA will keep the system from starting to move? Express your answer to two significant figures and include the appropriate units. What value of mAmA will keep the system moving at constant speed? Express your answer to two significant figures and include the appropriate units.