Kilmer Company's customer demand for its only product exceeds its manufacturing capacity. The company provided the following information for the machine whose limited capacity is prohibiting the company from producing and selling additional units: Actual run time this week Machine time available per week Actual run rate this week Ideal run rate Defect-free output this week Total output this week (including defects) 1-a. Utilization rate 1-b.Efficiency rate. 1-c. Quality rate 1-d. Overall equipment effectiveness 2-a. Utilization loss in units 7,500 minutes 12,500 minutes 2-b. Efficiency loss in units 2-c. Quality loss in units 6.30 units per minute 7 units per minute Required: 1. and 2. With respect to the company's overall equipment effectiveness, calculate the following: Note: Do not round intermediate calculations. Round final answers to 2 decimal places and "Units" answers to the nearest whole number. 37,800 units 47,250 units

Kilmer Company's customer demand for its only product exceeds its manufacturing capacity. The company provided the following information for the machine whose limited capacity is prohibiting the company from producing and selling additional units: Actual run time this week Machine time available per week Actual run rate this week Ideal run rate Defect-free output this week Total output this week (including defects) 1-a. Utilization rate 1-b.Efficiency rate. 1-c. Quality rate 1-d. Overall equipment effectiveness 2-a. Utilization loss in units 7,500 minutes 12,500 minutes 2-b. Efficiency loss in units 2-c. Quality loss in units 6.30 units per minute 7 units per minute Required: 1. and 2. With respect to the company's overall equipment effectiveness, calculate the following: Note: Do not round intermediate calculations. Round final answers to 2 decimal places and "Units" answers to the nearest whole number. 37,800 units 47,250 units

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

A robot is used for loading and unloading of parts to automated flexible machines. Loading time is 1 minute; unloading time is 1.5 minutes; machining time 15 minutes; Robot travel time between the machines including the inspection time is 3 minutes. Cost of robot C,=30 TL/Hour; cost of machines C2=40 TL/Hour. How many machines (integer number) should be assigned to the robot so that the total robot and machine costs per cycle are minimized? 8 - 176 a) 4 b) 3 c) 2 d) e) 6.
True, False or Uncertain. Explain your answer. Own wage elasticity JELLlincrease if product demand elasticity n? is high. In short run, when there is an increase in wage rate, each firm will hire less labor and so the industry labor demand is simply the horizontal summation of firm's labor demand. а. b. Labor demand is represented by the marginal revenue produce schedule (MRP) when we have competitive product market while it will be represented by the value of marginal product schedule (VMP) when we have a product market monopolist. When elasticity of substitution, SLK, increase that means the L and K are less substitutable, and the isoquant will be L-shaped. Minimum wage imposed by the government is always bad for the economy because it increase unemployment and deadweight loss. с. d. e. 3.
show complete solutionpls write legibly
You are given a line balancing problem with the following diagram. The processing time is above each process. Using the ranked positional weight (RPW) heuristic calculate the number of workstations for a desired cycle time CTd = 11 and the line efficiency based on this heuristic. B 5 7 A D E F 4 6.
1. A certain batch of parts is routed through six machines in a batch production plant. The setup and operation times for each machine are given in the table below. Batch size is 200 and the average nonoperation time per machine is15 hr. Determine (a) manufacturing lead time and (b) hourly production rate for operation 4.Machine 1 2 3 4 5 6Setup time (hr) 5 3 6 4 5 3Operation time (min) 3.0 3.3 8.2 3.9 4.5 2.3 a. 6(4.3+200(3.9/60)+15) = 193.8 hours 24.2 days if 8 hour shiftb. 4(60)+200(3.9)/200 =5.1 hourly production for operation 4 2. Suppose the part in the previous problem is made in very large quantities on a production line in which an automated work handling system is used to transfer parts between machines. Transfer time between stations is 30 sec. total time required to setup the entire line is 102 hr. Assume that the operation times at the individual machines remain the same as in the previous problem, Determine (a) manufacturing lead time for a part coming off the line,…
solve showing every single step with every single process, specially when you derivate thanks
Q1) For the Lath Machine operations shown in the table below: > Write the operation name > Locate and place the arrows showing the process variables in machining (v, f, d) on the operation sketch, stating process var.ables name. > State the parts in lathe machine that is responsible (provides) the motion for each variable, following the solved example. process variables Lathe part provide Operation sketch name motion Cutting speed (V) Headstock Velocity f Depth of cut (f) Feed rate Cross slide Tool Feed Depth of cut (d) Carriage Example Operation name : Straight turning WORK PECE Operation name : Operation name :
= Consider a four aisle AS/RS in which an S/R machine is used for each aisle. The length of the storage aisle 85 m and its height = 14 m. Suppose horizontal and vertical speeds of the S/R machine are 61 m/min and 23 m/min, respectively. The S/R machine requires 20 s to accomplish a P&D operation. The aisles in the AS/RS will be organized to follow a class-based dedicated storage strategy. There will be two classes, according to activity level. The more active stock is stored in the half of the rack system that is located closest to the input/output station, and the less active stock is stored in the other half of the rack system farther away from the input/output station. Within each half of the rack system, random storage is used. The more active stock accounts for 80% of the transactions, and the less active stock accounts for the remaining 20%. Assume that system utilization = 90%, and the number of single-command cycles = the number of dual-command cycles. Determine the throughput…
A company makes two kinds of door Knobs, standard and deluxe ,the making process cost the company 15$ for the standard and 20$ for the deluxe by making on a grinder and a smoother machines, which they can be run for at most 80 hours a week, each standard one needs 2 hours on the grinder, and 4 hours on the smoother, and each deluxe one needs 4 hours on the grinder and 3 hours on the smoother ,the company sales at 25$,35$ for the standard and the deluxe respectively. To have the profit it wants the company decide to make at least 15 knobs from them at a week, formulate the linear programming model?
6. A die forge press operates an average of 1000 hr/yr. Under a minimal repair concept, machine failures generated a nonhomogenous Poisson process having the following intensity function with t measured in operating hours: p (t) = 0.0000391t 07. When the machine has failed, the repair time is lognormal with tmed -7.0 hours and as hape parameter of 0.8. a) Write the expression for and calculate the MTBF, mean time between failures, for the mission time of 5 yr = 5,000 hr. b) Using this information over the 5 yr mission time, write the expression for and calculate the average inherent, steady state, Availability, Ainh of the mission time of 5 yr operating life of the press.
Question 2: The cost of a machine is 6200 S and scrape value is 130 S. The maintenance costs found from experience are follow. When should the machine be replaced? 3 Year Cost of 4 550 8 2000 1 2 150 300 410 960 1350 1850 maintenance
A company uses various machines in the preparation of ice cream. The firm has been successful until recently when it noticed growing repair expenses for the various machines it uses. Over the past 20 months, the machines have broken down at the rate indicated in the following table: Each time a machine breaksdown, the company estimates that it loses an average of US$300 in production time and service expenses. Should the company opt to purchase a service contract for preventive maintenance by Angeles Machineries Inc., (AMI) there will still be breakdowns, averaging one breakdown per month. The price for this service by AMI is US$150 per month. a. If the company continues as is, what is the expected no. of breakdowns based on past history? b. What will be the cost of breakdowns per month to the company without a preventive maintenance contract? c. What will be the cost of breakdowns per month to the company with a preventive maintenance contract? d. Should they engage the…