Help me with this Q7: Give an answer to the following questions:1. Is it useful to utilize steam as working fluid in vapor compression cycle?Why?2. In refrigerant cycles, surface area of condenser is larger than that of theevaporator. Why?3. What is the difference between cooling towers and air washers?4. What is the influence of friction rate selection on the duct work?5. How can absorption refrigeration systems be driven by renewable energyresources?

using steam as a working fluid, are not well suited to the recovery of power from heat sources in…

Is it useful to utilize steam as working fluid in vapor compression cycle? Why? In refrigerant cycles, surface area of condenser is larger than that of the evaporator. Why? What is the difference between cooling towers and air washers? What is the influence of friction rate selection on the duct work? How can absorption refrigeration systems be driven by renewable energy resources?

Is it useful to utilize steam as working fluid in vapor compression cycle? Why? In refrigerant cycles, surface area of condenser is larger than that of the evaporator. Why? What is the difference between cooling towers and air washers? What is the influence of friction rate selection on the duct work? How can absorption refrigeration systems be driven by renewable energy resources?

Refrigeration and Air Conditioning Technology (MindTap Course List)

8th Edition

ISBN:9781305578296

Author:John Tomczyk, Eugene Silberstein, Bill Whitman, Bill Johnson

Publisher:John Tomczyk, Eugene Silberstein, Bill Whitman, Bill Johnson

Chapter22: Condensers

Section: Chapter Questions

Problem 7RQ: When a standard-efficiency air-cooled condenser is used, the condensing refrigerant will normally be...

See similar textbooks

Similar questions

What are the approximate temperature ranges tor low-, medium-, and high-temperature refrigeration applications?
The defrost cycle in a domestic refrigerator may be terminated by two methods: ___and___.
Define net refrigeration effect as it applies to the refrigeration cycle.
What is the common refrigerant used in absorption refrigeration machines?
When a standard-efficiency air-cooled condenser is used, the condensing refrigerant will normally be higher in temperature than the entering air temperature.
Condensers in these refrigerators are all_______cooled.
Welded ______sealed compressors are normally used in household refrigerators.
Q2/ A vapor-compression refrigeration system operates on the cycle. The refrigerant is tetrafluoroethane. For Evaporation T = 0°C; condensation T = 26°C; n(compressor) = 0.79; refrigeration rate = 600 kJ-s—1., determine the circulation rate of the refrigerant, the heat-transfer rate in the condenser, the power requirement, the coefficient of performance of the cycle
1st Step: Evaluate the performance of the Refrigerator 1.Refrigerator 1 operates as a reverse Carnot cycle using R-717 as the refrigerant at aflow of 1.8 kg/s. The condensing and evaporating temperatures are 25 °C and -5 °C, respectively.To evaluate the performance of Chiller 1, you must determine the following performance parameters:project:a) Rate of heat elimination in the condenser (Q );b) The power of the compressor;c) The COP of the cycle.For the energy balance, make the following considerations:- Permanent regime;- Variation of kinetic energy and potentials are negligible;- Compressor and turbine operate adiabatically;- Evaporation and condensation steps do not involve work. Please, make it typeable, written in virtual text, do not do it by hand and do not take a photo, it interferes with the understanding of the lyrics.
Steam or water substance is used in a Carnot refrigeration cycle. The evaporator temperature is 300 K and the condenser temperature is 500 K. During condensation the steam changes from a saturated vapor to a saturated liquid. Calculate (a) the compressor work (kJ/kg) required, (b) the net work (kJ/kg) per cycle, (c) the coefficient of performance.
Q1: A Carnot engine with H₂O as the working fluid. The circulation rate is (1Kg/sec) for conden: temperature 300K and boiler temperature 475K.Determine: 1. The quality at the inlet and outlet points of condenser. 2. The rate of heat addition. 3. The rate of heat rejection. 4. The power for each of the four steps. The thermal efficiency of the cycle. 5. T/K P/kPa H/(k J/kg) H/(k J/kg) S/(k J/kg.K) S/(k J/kg.K) 300 3.533 112.5 2550.6 0.3929 8.5200 475 1616.0 860.7 2792.0 2.3482 6.4139 Q2: Explain with draw the development steps of Ranking cycle on T-S diagram.
Refrigerant 134a is used in a cooling system operating according to the ideal cooling cycle with vapor compression for cooling the cold storage in the milk processing plant. The flow rate of the refrigerant is 0.10 kg/s. The condenser and evaporator pressures are 1000 kPa and 600 kPa, respectively. a) Calculate the cooling capacity as (kW). b) Calculate the volumetric flow rate of the refrigerant at the compressor inlet. c) Calculate the efficiency coefficient of the cooling system.