Given the proposed magnetic circuit below. We assume that the magnetic flux is linked by the coil and it is confined to the magnetic core. The magnetic circuit is characterized by the following: Hy = 103 N = 0.5 × 10³ turns i = 100 mA l = 100 mm N turns h = 10 cm l1 = 80 mm 12 = 0.09 m W=1cm 1.1 Calculate the flux on the magnetic structure 1.2 Calculate the flux density on the magnetic structure. 1.3 Calculate the field intensity on the magnetic structure

Given the proposed magnetic circuit below. We assume that the magnetic flux is linked by the coil and it is confined to the magnetic core. The magnetic circuit is characterized by the following: Hy = 103 N = 0.5 × 10³ turns i = 100 mA l = 100 mm N turns h = 10 cm l1 = 80 mm 12 = 0.09 m W=1cm 1.1 Calculate the flux on the magnetic structure 1.2 Calculate the flux density on the magnetic structure. 1.3 Calculate the field intensity on the magnetic structure

Power System Analysis and Design (MindTap Course List)

6th Edition

ISBN:9781305632134

Author:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Publisher:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Chapter3: Power Transformers

Section: Chapter Questions

Problem 3.1MCQ: The Ohms law for the magnetic circuit states that the net magnetomotive force (mmf) equals the...

See similar textbooks

Similar questions

The Ohms law for the magnetic circuit states that the net magnetomotive force (mmf) equals the product of the core reluctance and the core flux. (a) True (b) False
A magnetic circuit has a length of 100 cm and cross-sectional area of 5 square cm. The total flux is 10 x 104 webers. The coil has 100 turns and current of 4 amperes. What is the magnetic strength? a. 500 AT/m b. 400 AT/m c. 350 AT/m d. 450 AT/m
show thatvthis is a magnetic flux density: then prove and interpret it with reasons on each step
A magnetic ring has reluctance of 1.675 × 10⁰ AT weber. The flux to be produced by the coil is 800 x 10 webers, then the AT required for the m.m.f. will be
3- A magnetic core with an air gap is shown in below Figure. The depth of the core is 3 cm, the length of the air gap in the core is 4 cm, and the number of turns on the coil is 100. How much current is required to produce total flux of 0.00052 Weber? (H= 2000, Ho=4.n107). 6 cm 20 cm N = 100 4 cm = lg 6 cm 6 cm 18 cm 12 cm 18 cm 6 ст Depth = 3 cm
A magnetic circuit with a cross-sectional area of 20 cm? is to be operated at 50 Hz from a 120 V rms supply. The number of turns required to achieve a peak magnetic flux density of 1.8 T in the core is
The length of a magnetic circuit in a moving iron instrument is 300mm. The coil around the soft iron core has 360 turns and takes a current of 1.75 A. The core is square in section with sides of 20mm. Take the relative permeability of soft iron as 1100. Determine the total flux
A magnetic circuit has 150 turns-coil, the cross- sectional area 5 x 10-4 m2 and the length of the magnetic circuit 25 x 10-2 m. What are the values of magnetic field intensity and relatíve permeability when the current is 2 A and total flux is 0.3 x 10-3 Wb? (a) 1200 AT/m and 397.9 (b) 300 AT/m and 500 x 10-6 (c) 300 AT/m and 397.9 (d) 1200 AT/m and 500 x 10-6
The length of a magnetic circuit in a moving iron instrument is 300mm.The coil around the soft iron core has 360 turns and takes a current of 1.75A.The core is square in section with sides of 20mm.Take the relative permeability of soft iron as 1100. Determine the magnetomotive force in the core. Determine the field strength. Determine the flux density. Determine the total flux.
Using figures (a) and (b), a magnetic flux density of 0.1 Wb in the air gap Determine the current I in the coil with 200 turns required to produce
An iron circuit with a small0.75 mm air gap is shown in Figure 1. A 6000 turn coil carries a current I = 18 mA which sets up a flux within the iron and across the air gap. The cross section of the iron is a consistent 0.8 cm2, and the mean length of the flux path is 0.15 m. a) Redraw the magnetic circuit using schematic symbols of an electric circuit with reluctance in each part of the circuit. b) State's Ohm's Law for magnetic circuit. c) By neglecting the effect of fringing, calculate the reluctance of the circuit. d) Find the flux within the core. N = 6000 Iron circuit (u, = 800 for iron). Figure 1
Problem 1A core with a coil has 240 turns, to generate a flux ø of 0.008482 weber, how much should the current i1 be and what will its direction be? Relative permeabilities: metal 1 of 250 and metal 2 of 375. Core depth 25cm