Figure 150 mm. 75 mm 1 of 1 P = 150 N ▼ Part A If the cord is subjected to a horizontal force of P = 150 N, and gear is supported by a fixed pin at O, determine the angular velocity of the gear in 3 s, starting from rest. The mass of the gear is 42 kg and it has a radius of gyration of ko = 125 mm. The mass of the gear rack is 20 kg. Assume that the contact surface between the gear rack and the horizontal plane is smooth. (Figure 1) Express your answer with the appropriate units. Assume the counterclockwise rotation as positive. = لها Submit Part B HA Value V= Request Answer Determine the velocity of the gear rack in 3 s, starting from rest. Express your answer with the appropriate units. Assume the direction to the right as positive. μA Units Value ? Units ?

Figure 150 mm. 75 mm 1 of 1 P = 150 N ▼ Part A If the cord is subjected to a horizontal force of P = 150 N, and gear is supported by a fixed pin at O, determine the angular velocity of the gear in 3 s, starting from rest. The mass of the gear is 42 kg and it has a radius of gyration of ko = 125 mm. The mass of the gear rack is 20 kg. Assume that the contact surface between the gear rack and the horizontal plane is smooth. (Figure 1) Express your answer with the appropriate units. Assume the counterclockwise rotation as positive. = لها Submit Part B HA Value V= Request Answer Determine the velocity of the gear rack in 3 s, starting from rest. Express your answer with the appropriate units. Assume the direction to the right as positive. μA Units Value ? Units ?

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

The 18-kg rod AB is pin-connected at A and subjected to a couple moment of M =15 N- m The rod is released from rest when the spring is unstretched at 0 = 30°. As the rod rotates, the spring always remains horizontal, because of the roller support at C. (Figure 1) Determine the rod' s angular velocity, measured clockwise, at the instant 0 = 60°. Express your answer using three significant figures. Enter positive value if the angular velocity is clockwise and negative value if the angular velocity is counterclockwise. vec rad/s k = 40 N/m 0.75 m M = 15 N- m
The 110-kg wheel has a radius of gyration about its center O of ko = 220 mm, and radius r = 0.4 m. When the wheel is subjected to the constant couple moment M = 63 N•m, it starts rolling from rest. Determine the wheel's angular velocity W (in rad/s) after 6.0 seconds if the wheel has been rolling without slipping. Please pay attention: the numbers may change since they are randomized. Your answer must include 2 places after the decimal point. Take g = 9.81 m/s². T M Your Answer: Answer
The 27-kg wheel has a radius of gyration about its center O of ko = 260 mm, and radius r = 0.5 m. When the wheel is subjected to the constant force F = 354 N, applied to the wheel's center axle at an angle = 6°, it starts rolling from rest. Determine the wheel's angular velocity W (in rad/s) after 3.2 seconds if the wheel has been rolling without slipping. Please pay attention: the numbers may change since they are randomized. Your answer must include 1 place after the decimal point. Take g = 9.81 m/s². F 0 Your Answer: Answer
f cion A force of P = 20 N is applied to the cable, which causes a 175 kg of radius of Gyration KG = 0.42m reel to turn without slipping on the 2 rollers A and B of each 18 kg and radius of 0.1m. P 30° 250 mm OG 500 mm AO OB -400 mm- Calculate the work done by the 20N for 2 revolutions. (J) Determine the angular velocity of the reel after it has rotated 2 revolutions starting from rest. (rad/s) Calculate the Kinetic energy of roller A after the reel rotated 2 revolutions starting from rest. (J) Choose... 7.952 1.88 32.2 3.14 1.98 16.34 20 3.66 62.831 Choose... Choose... Choose... 52 8:44 AM MM
The 21-kg wheel has a radius of gyration about its center O of ko =260 mm, and radius r = 0.5 m. When the wheel is subjected to the constant force F = 247 N, applied to the wheel's center axle at an angle = 6°, it starts rolling from rest. Determine the wheel's angular velocity W (in rad/s) after 4.0 seconds if the wheel has been rolling without slipping. Please pay attention: the numbers may change since they are randomized. Your answer must include 1 place after the decimal point. Take g = 9.81 m/s². Your Answer: G Answer r 0 F
2. A constant 9-lb force is applied to the 80-lb stepped cylinder as shown. The radius of gyration about the center of the circle is kg = 8 in. It rolls on the incline without slipping. If the cylinder is at rest when the force is first applied, find the angular velocity after 8 seconds. Q Search DELL F9 10" F10 6" F11 F12 10° ESP 9 lb 4x PrtScr
A drum with a radius of 0.5 ft has a weight of 90 lb and a radius of gyration ko = 0.3 ft. A weightless cable is wrapped around the drum and rotates it clockwise. If the cable is being pulled by a force P = 15 lb, determine the time needed to increase the drum's angular velocity from w1 = 6 rad/s to wz = 24 rad/s. 0.5 ft
The frame of a tandem drum roller has a weight of 5000 N excluding the two rollers. Each roller has a weight of 1900 N and a radius of gyration about its axle of 1.25 m.If a torque of M = 300 N.m is supplied to the rear roller A ,determine the speed of the drum roller 20 s later, starting from rest. 1.5m 1.5 m B M = 300 N.m
The slender 8-kg bar AB is horizontal and at rest. The spring has an unstretched length sọ of 1 m and a spring constant of 15 N/m. the length of the bar AB is l1.Sm Find the angular velocity when e - 45° when the bar has rotate clockwise - 45° after being released. Give your answer with 2 decimals and include the sign
The body and bucket of a skid steer loader has a weight of 2000 lb, and its center of gravity is located at G. Each of the four wheels has a weight of 100 lb and a radius of gyration about its center of gravity of 1ft. If the engine supplies a torque of M = 100 lb ft to each of the rear drive wheels, determine the speed of the loader in t = 10 s starting from rest. The wheels roll without slipping
The 50 kg flywheel has a radius of gryation = 0.4 m about its shaft axis and is subject to the torque M = 2 (1-e0.10) N m where e is in radians. USING THE PRINCIPLE OF WORK AND ENERGY, If the flywheel is at rest when e=0°, determine the angular velocity after 7 revolutions.
4. The 10-kg rod AB is pin-connected at A and subjected to a couple moment of M = 15 Nm. If the rod is released from rest when the spring is unstretched at 8 = 30°, determine the angular velocity of the rod at the instant 0 = 60°. Thanks to the roller support at C, the spring always remains horizontal when the rod rotates. A O k= 40 N/m M=15 N·m 0.75 m