Solve correctly please, should match with given ans. Determine the overall U-factor for a double-door-type, wood-framed window with glassglazing and metal spacers, and compare your result to the value listed in Table 5-56. The overalldimensions of the window are 1.80 m x 2.00 m, and the dimensions of each glazing are 1.72 mx 0.94 m. Assume the window is glazing with an air space of 6.4 mm. Ans. 3.19 W/m²-°C.1.8 m1.72 mFrame0.94 mEdgeof glass2mCenterof glass0.94 m-

The height of window, H = 1.8 mThe width of window, B = 2 mThe height of each glazing, h = 1.72…

Determine the overall U-factor for a double-door-type, wood-framed window with glass glazing and metal spacers, and compare your result to the value listed in Table 5-5b. The overall dimensions of the window are 1.80 m x 2.00 m, and the dimensions of each glazing are 1.72 m x 0.94 m. Assume the window is glazing with an air space of 6.4 mm. Ans. 3.19 W/m²-°C. 1.8m 1.72 m Edge Frame of glass 0.94 m m Center of glass 0.94 m

Determine the overall U-factor for a double-door-type, wood-framed window with glass glazing and metal spacers, and compare your result to the value listed in Table 5-5b. The overall dimensions of the window are 1.80 m x 2.00 m, and the dimensions of each glazing are 1.72 m x 0.94 m. Assume the window is glazing with an air space of 6.4 mm. Ans. 3.19 W/m²-°C. 1.8m 1.72 m Edge Frame of glass 0.94 m m Center of glass 0.94 m

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

What is the rate of heat transfer through a piece of Celotex 3 ft by 8 ft by 1 in. in thickness, if the temp of one surface is 80°F and of the other side is 60°F? thermal conductivity of Celotex in AES = 0.028. Pls determine the temperature gradient and the direction of the heat transfer as well.
A wall in a house contains a single window. The window consists of a single pane of glass whose area is 0.13 m2 and whose thickness is 8 mm. Treat the wall as a slab of the insulating material Styrofoam whose area and thickness are 19 m2 and 0.10 m, respectively. Heat is lost via conduction through the wall and the window. The temperature difference between the inside and outside is the same for the wall and the window. Of the total heat lost by the wall and the window, what is the percentage lost by the window?
The clear plastic bottles used for carbonated beverages (sometimes also called “soda,” “pop,” or “soda pop”) are made from poly(ethylene terephthalate) (PET). The “fizz” in pop results from dissolved carbon dioxide (CO2); because PET is permeable to CO2, pop stored in PET bottles will eventually go “flat” (i.e., lose its fizz). A 20-oz. bottle of pop has a CO2 pressure of about 570 kPa inside the bottle, and the CO2 pressure outside the bottle is 7 kPa. Assuming conditions of steady-state, calculate the diffusion flux in cm3 at STP/cm2.s of CO2 through the wall of the bottle. The Permeability Constant of the PET bottle is 0.23 x 10^-13 cm3@STP.cm/cm2.s.Pa. Note: assume that each bottle has a surface area of 500 cm2 and a wall thickness of 0.07 cm. Answer in Scientific Notation example 1.1e-12. Round your answer to 2 significant figures.
The clear plastic bottles used for carbonated beverages (sometimes also called “soda,” “pop,” or “soda pop”) are made from poly(ethylene terephthalate) (PET). The “fizz” in pop results from dissolved carbon dioxide (CO2); because PET is permeable to CO2, pop stored in PET bottles will eventually go “flat” (i.e., lose its fizz). A 20-oz. bottle of pop has a CO2 pressure of about 485 kPa inside the bottle, and the CO2 pressure outside the bottle is 0.6 kPa. The Permeability Constant of the PET bottle is 0.23 x 10^-13 cm3@STP.cm/cm2.s.Pa. Note: assume that each bottle has a surface area of 500 cm2 and a wall thickness of 0.07 cm. If the bottle must lose 750 (cm3 STP) of CO2 before the pop tastes flat, what is the shelf life in days for a bottle of pop? Round your answer to 0 decimal places.
The change in elasticity of the steak on cooking is due partly to the loss of water volume (so that existing bonds get closer together) and partly to the creation of new bonds. Assume all of the difference in raw vs. cooked steak thickness is due to water loss that makes it thinner (25 mm thick in the uncooked steak, versus 15 mm thick in the cooked steak), and that the other dimensions of the steak (length and width) have not changed. By what percentage has the steak's volume decreased from the original value? (Give your answer as a number between 0 and 100, without the percentage sign.) If you compare the distances between the bonds in the raw and cooked steaks, what would you expect to observe? a) The distance between bonds would be greater in the raw steak. b) The distance between bonds would be greater in the cooked steak. c) The distance between bonds would be the same in both steaks.
What is the rate of heat transfer, temperature gradient, and the direction of the heat transfer through a piece of Celotex 3 ft by 8 ft by 1 in. in thickness, if the temp of one surface is 80°F and of the other side is 60°F? - thermal conductivity of Celotex in AES = 0.028.
H.W: 10-02-2021: The exterior wall of a building consists of 100 mm thick face brick (k = 0.9 Wm¯'K'), 40 mm thick polystyrene insulating board (k 0.036 Wm'K¯), 125 mm thick concrete block (k = 1.8 Wm¯'K') and 15 mm thick interior gypsum board (k = 0.18 Wm K). The inside and outside convective heat transfer coefficients are 6.5 Wm K and 22.5 Wm K respectively. The outside air temperature is -5°C and the inside air temperature is 20°C. The wall is 3 m high and 15 m long. Calculate (i) the rate of heat loss through the wall,
Bebang owns a 830-mm-thick concrete brick table top that has an area of 10,000,000 mm^2 and a 0.750-cm-thick glass plate that has an area of 20,000 cm^2. Assuming the same temperature difference across each, what is the ratio of the rate of heat conduction through the plate with respect to the rate of heat conduction through the table top? Use Table 10.1(given below) for the value of Thermal Conductivity k. Table 10.1 Thermat Conductivities of Common Substances Values are given for temperatures near o °C. Substance Thermal Conductivity k (W/m-O Diamond 2000 Silver 420 Copper 390 Gold 318 Aluminum 220 Steel iron Steel (stainless) 14 Ice 2.2 Glass (average) 0.84 Concrete brick O.84 water 0.6 Fatty tissue (without blood) 0.2 Asbestos 0.16 Plasterboard 0.16 wood 0.08-0.16 Snow (dry) 0.10 Cork 0.042 Glass wool 0.042 wool 0.04 Down feathers 0.025 Air 0.023 Polystyrene foam 0.010
WORK PROBLEM 7-29 IF GLAZING SYSTEM IS 56. 7:27. FOR 3:00p.m. SOLAR TIME, ON JULY 21, IN BOISE, ID. A 3ft WIDE AND 5ft HIGH WINDOW FACES SOUTH WEST- (ACTUALLY, IT FACES SOUTHWEST ALL THE TIME!) THE NEW INOPERABLE WINDOW HAS A 2in. WIDE ALUMINUM FRAME WITH A THERMAL BREAK UTILIZING METAL SPACERS. THE GLAZING SYSTEM IS 21C IN TABLE 7-3. THERE IS NO INTERIOR OR EXTERIOR SHADING. CALCULATE THE TOTAL SOLAR HEAT GAIN, USING THE SIMPLIFIED APPROACH.
A spherhe of aluminium is staying in an air atmosphere . what would be the change in the internal energy of the sphere with respect to the time given: Ti- initial temperature of the aluminium ( homogeneous) Ta- air temperature (constant) k -conduction coefficient of aluminium hinf- convective coefficient air Cp Cv
(a) What is the rate of energy loss in watts per square meter through a glass window 2.9 mm thick if the outside temperature is -15°F and the inside temperature is +78°F? (b) A storm window having the same thickness of glass is installed parallel to the first window, with an air gap of 6.8 cm between the two windows. What now is the rate of energy loss if conduction is the only important energy- loss mechanism? (The thermal conductivity of window glass is 1.0 W/m-K, and of air is 0.026 W/m.K.) Jak w (a) Number i (b) Number i Units Units ✪ ✪
ricant An oil is acting as a lubricant for a pair of cylindrical surfaces such as those shown in 1. The angular velocity of the outer cylinder is 7908 rpmt. The outer cylinder has a radius of 5.06 cm, and the clearance between the cylinders is 0.027 cm. What is the maxi- mum temperature in the oil if both wall temperatures are known to be 158° F? The physical properties of the oil are viscosity density thermal conductivity 92.3 cp 1.22 g cm-3 0.0055 cal sec-1 cm-1 ° C-1