Consider a TCP connection with the following parameters: a) Initial ssthreshold = 8 b) Round Trip Time (RTT) = 10 milliseconds c) Timeout Interval = 40 milliseconds d) Segment size = 2800 bytes The TCP connection was used to transfer 16 segments. While sending the segments, Segment 5 and Segment 15 were lost the first time they were sent (but arrived at the receiver properly when retransmitted). There were no other segment losses apart from the aforementioned. Assume that segments received out-of-order are buffered at the receiver. What is the average throughput obtained in sending all the segments (in bytes/sec)? Draw a diagram to show your work in detail.

Consider a TCP connection with the following parameters: a) Initial ssthreshold = 8 b) Round Trip Time (RTT) = 10 milliseconds c) Timeout Interval = 40 milliseconds d) Segment size = 2800 bytes The TCP connection was used to transfer 16 segments. While sending the segments, Segment 5 and Segment 15 were lost the first time they were sent (but arrived at the receiver properly when retransmitted). There were no other segment losses apart from the aforementioned. Assume that segments received out-of-order are buffered at the receiver. What is the average throughput obtained in sending all the segments (in bytes/sec)? Draw a diagram to show your work in detail.

Operations Research : Applications and Algorithms

4th Edition

ISBN:9780534380588

Author:Wayne L. Winston

Publisher:Wayne L. Winston

Chapter20: Queuing Theory

Section20.10: Exponential Queues In Series And Open Queuing Networks

Problem 8P

See similar textbooks

Similar questions

TCP congestion control example. Consider the figure below, where a TCP sender sends 8 TCP segments at t = 1, 2, 3, 4, 5, 6, 7, 8. Suppose the initial value of the sequence number is 0 and every segment sent to the receiver each contains 100 bytes. The delay between the sender and receiver is 5 time units, and so the first segment arrives at the receiver at t = 6. The ACKs sent by the receiver at t = 6, 7, 8, 10, 11, 12 are shown. The TCP segments (if any) sent by the sender at t = 11, 13, 15, 16, 17, 18 are not shown. The segment sent at t=4 is lost, as is the ACK segment sent at t=7. TCP sender t=1 T t=2 t=3 t=4+ t=5- t=6+ t=11 t=12 t=13 t=14 t=15 t=16 t=17 t=18 I data segment data segment data segment data segment data segment data segment data segment data segment ACK ACK ACK ACK ACK ACK Ty A A V V htt TCP receiver t=6 t=7 t=8 t=9 t=10 t=11 t=12 t=13 What does the sender do at t=17? You can assume for this question that no timeouts have occurred.
Consider a TCP connection with the following parameters: a) Initial ssthreshold = 4 segmentsb) Round Trip Time (RTT) = 10 millisecondsc) Timeout period = 40 millisecondsd) Segment size = 3900 bytesThe TCP connection was used to transfer 17 data segments. While sendingthe segments, data segment 7 and data segment 15 were lost the first timethey were sent (but arrived at the receiver properly when retransmitted).There were no other segment losses apart from the aforementioned. Assumethat data segments received out-of-order are buffered at the receiver. Whatis the average throughput obtained in sending all the data segments (inbytes/sec) including draw a diagram to show the communication process in detail.
Consider a TCP connection with the following parameters: a) Initial ssthreshold = 4 segmentsb) Round Trip Time (RTT) = 10 millisecondsc) Timeout period = 40 millisecondsd) Segment size = 3900 bytesThe TCP connection was used to transfer 17 data segments. While sendingthe segments, data segment 7 and data segment 15 were lost the first timethey were sent (but arrived at the receiver properly when retransmitted).There were no other segment losses apart from the aforementioned. Assumethat data segments received out-of-order are buffered at the receiver. Whatis the average throughput obtained in sending all the data segments (inbytes/sec)? Draw a diagram to show the communication process in detail.
TCP congestion control example. Consider the figure below, where a TCP sender sends 8 TCP segments at t = 1, 2, 3, 4, 5, 6, 7, 8. Suppose the initial value of the sequence number is 0 and every segment sent to the receiver each contains 100 bytes. The delay between the sender and receiver is 5 time units, and so the first segment arrives at the receiver at t = 6. The ACKS sent by the receiver at t = 6, 7, 8, 10, 11, 12 are shown. The TCP segments (if any) sent by the sender att = 11, 13, 15, 16, 17, 18 are not shown. The segment sent at t=4 is lost, as is the ACK segment sent at t=7. t=1 T data segment t=2+ data segment data segment-- t=3 TCP sender TCP receiver t=4+ t=5+ data segment - data segment t=6+ t36 data segment t=7 data segment t=8 data segment t=9 ACK + t=10 k -- ACK t=11 t=11 t=12 t=12 t=13 t=13 t=14 ACK -ACK ACK t=15 t=16 t=17 ACK t=18 What does the sender do at t=17? You can assume for this question that no timeouts have occurred.
Asap
4) Host A and B are communicating over a TCP connection, and Host B has already received from A all bytes up through byte 130. Suppose Host A then sends two segments to Host B back-to-back. The first and second segments contain 80 and 40 bytes of data, respectively. In the first segment, the sequence number is 131, the source port number is 301, and the destination port number is 80. Host B sends an acknowledgment whenever it receives a segment from Host A. a. In the second segment sent from Host A to B, what are the sequence number, source port number, and destination port number? b. If the first segment arrives before the second segment, in the acknowledgment of the first arriving segment, what is the acknowledgment number, the source port number, and the destination port number? c. If the second segment arrives before the first segment, in the acknowledgment of the first arriving segment, what is the acknowledgment number?
SInternet Check sum Consider the figure below (simplex communication scenario). The TCP sender sends an initial window of 4 segments. Suppose the initial value of the sender ན༽)། sequence number, SEQ1, is 100 and the first 4 segments each contain 400 bytes of payload. As you can see ACK 3 is lost. What is the SEQ number (SEQ2, SEQ3, SEQ4, SEQ5) from the Sender and ACK Number (ACK1, ACK2, ACK3, ACK4, ACK5) from the receiver for each segment? Sender Seq1 Seq2 Seq3 Seg4 ACK1 ACK2 ACK3 ACK4 Seq5 ACK5 Receiver
An HTTP client opens a TCP connection using an initial sequence number (ISN) of 14,534 and the ephemeral port number of 59,100. The server opens the connection with an ISN of 21,732. Show the three TCP segments during the connection establishment if the client defines the rwnd of 4000 and the server defines the rwnd of 5000. Ignore the calculation of the checksum field.
Consider the figure below in which a TCP sender and receiver communicate over a connection in which the segments can be lost. The TCP sender wants to send a total of 10 segments to the receiver and sends an initial window of 5 segments at t = 1, 2, 3, 4, and 5, respectively. Suppose the initial value of the sequence number is 151 and every segment sent to the receiver each contains 612 bytes. The delay between the sender and receiver is 7 time units, and so the first segment arrives at the receiver at t = 8, and an ACK for this segment arrives at t = 15. As shown in the figure, 1 of the 5 segments is lost between the sender and the receiver, but none of the ACKs are lost. Assume there are no timeouts and any out of order segments received are thrown out.
Suppose an extension of TCP allows window size much larger than 64 KB. Assume the extended TCP runs over a 100-Mbps link with RTT 100 ms, segment size is 1 KB, and receiving window size is 1 MB. How long does it take to send a 200 KB file?
Consider a TCP connection betweek two hosts between A and B. The first data byte sent by A is numbered 1. The LastByteRcvd at B is 500. Then, the range of values SendBase at A may take is from to 500
Consider a TCP connection with congestion window size 40 KB, maximum segment size is 2 KB, if time taken by TCP connection to get 37 KB congestion window is 351 ms, round trip time of the connection is __(ms).