At the instance and position shown, determine ag in rad/s? if wa =4,3 rad/s (clockwise) and ag =2,42 rad/s2 (counter-clockwise)? Verilen konumda ve an için, wa =4,3 rad/s (saat yönünde) ve ag =2,42 rad/s? (saatin tersi yönde) ise az ivmesini rad/s? cinsinden bulunuz? C FIXED/ SABİT GÖVDE y A 0.9 m 3.

At the instance and position shown, determine ag in rad/s? if wa =4,3 rad/s (clockwise) and ag =2,42 rad/s2 (counter-clockwise)? Verilen konumda ve an için, wa =4,3 rad/s (saat yönünde) ve ag =2,42 rad/s? (saatin tersi yönde) ise az ivmesini rad/s? cinsinden bulunuz? C FIXED/ SABİT GÖVDE y A 0.9 m 3.

Precision Machining Technology (MindTap Course List)

2nd Edition

ISBN:9781285444543

Author:Peter J. Hoffman, Eric S. Hopewell, Brian Janes

Publisher:Peter J. Hoffman, Eric S. Hopewell, Brian Janes

Chapter8: Computer Numerical Control

Section8.6: Cnc Milling: Programming

Problem 8RQ: Briefly describe the use of I and J for the arc center method of circular interpolation.

See similar textbooks

Similar questions

The figure below represents a Whitworth quick-return mechanism which is used in shapers. It is required that the tool holder (link 6) maintain a nearly constant velocity during the cutting stroke but accelerates on the return stroke in order to reduce idle time. The inputs are: VA2=8m/s, a2=0. Find the following: a) The angular velocity m4 b) The magnitude of the sliding velocity and acceleration of A c) Angular acceleration a4 d) Find the acceleration of A via link 2 e) Find the acceleration of A using the angular velocity and acceleration along with the Coriolis effect and the acceleration along the axis of slip (via link 4) f) Find the acceleration of the tool holder (C). 2 (VA2 = 6 m/sec 02 4 B * 45° 0,04 0,A = 19.1 cm 0,B = 10.2 cm 35.6 cm 8.9 cm 04 BC
Determine the following based on the given: a) velocity of point A (in/s), b) the angle of Va with reference with the x axis, c) component of Va perpendicular to line AB, d) angular velocity of link 4 (rad/s), e) velocity of point B (in/s), and f) the angle of Vb with reference to x axis.
B t Yo = hi 10 720s 3.5km Calculate Y = Yo exp (B.t) Show how the above in a fx82ms Calculator. 75 formula is used S 24
Solve using parallelogram and Trigonometry please explain how
9- O A) 3*F(AD)=(5.385)*F(AE) B) F(AC)=(5.385)*F(AB) C) 2*F(AD)=(5.385)*F(AC) O D) F(AE)=W O E) 4*F(AD)=(5.385)*F(AB)
Given: N1 = 10, N2 = 20, N3 = 30, N4 = 40 J1 = 1, J2 = 2, J3 = 3, J4 = 4, J5 = 5, D1 = 1, and D2 = 2 Determine: 01(s)/Tl(s) T₁(1) 0₁ (1) CC N₂ D2, J2 N₁ J₁. Di N3 J3 N4 N₂0 JS J4
In a rotating body, if it rotates at 2045 revolutions per minute.What would be the angular velocity ? the angular velocity of the rotating body in rad/sec is
Two cylinders act right after one another. Each cylinder is metered, and some actions are slow, and there is a dwell between some actions. What is the minimum flow rate required (CFM) to operate this cylinders? (enter answer with 2 decimal places) Sequence of operations: Cyl. A extends with metering (takes 1.5 second) Dwell time for 2 seconds for part machining Cyl. B extend and retracts without metering (2 second) Dwell time for 10 seconds while an electric mixer is operated Cyl. A retracts quicky with no metering (0.5 seconds) Dwell time for 5 seconds while a part is placed before next cycle Assuming the displacements of the cylinders are: Cyl. A DE 65 in³ = Cyl. A DR = 62 in³ = Cyl. B DE 44 in³ Cyl. B DR=41 in³
two pulleys are connected by a belt. The nubers of RPM of the two pulleys vary inversely as their diameters. A pulley having a diameter of 25cm is turning at 900 rpm. what is the number of RPM of the second pulley wgich has a diameter of 40cm
Two cylinders act right after one another. Each cylinder is metered, and some actions are slow, and there is a dwell between some actions. What is the minimum flow rate required (CFM) to operate this cylinders? (enter answer with 2 decimal places) Sequence of operations: Cyl. A extends with metering (takes 1.5 second) Dwell time for 2 seconds for part machining Cyl. B extend and retracts without metering (2 second) Dwell time for 10 seconds while an electric mixer is operated Cyl. A retracts quicky with no metering (0.5 seconds) Dwell time for 5 seconds while a part is placed before next cycle Assuming the displacements of the cylinders are: Cyl. A DE = 65 in3 Cyl. A DR = 62 in3 Cyl. B DE = 44 in3 Cyl. B DR = 41 in3
B3. SOLVE STEP BY STEP IN DIGITAL FORMAT A set of sprockets is constructed, as shown in Figure 1, so that the second and third rotate on a common axis. When the first rotates, it drives the second and this in turn drives the third. Let and be the numbers of revolutions per minute of the first, second, and third axes. dy du dy dy dtu Find www.du' dx' and, and verify that dr du Figure 1 |1cm axis 1 |- 4cm -| axis 2 axis 1: y rev per minute axis 2: u rev per minute axis 3: x rev per minute |1e| |- 3cm-|| axis 3
Write a CNC Milling program to machine the outer profile of a 6 mm thick aluminum sheet. Cutting parameters: depth of cut 3 mm, speed 1200 rpm, feed rate 100 mm/min, and coolant. Tool size 8 mm. (you can use the tool cutter compensations codes). Use an absolute coordinate from the point identified as tool position. 10 40 R 10 R 10 40 Tool position 20 z, 10 mm above All units in mm the sheet