can you please find the solution for this question.also free body diagram and units check is needed JAs shown in the figure below, a Metal Part (Object 2) is submerged in water (@ 15°C) and suspended from apartially submerged Wood Block (Object 1) by a cable.Calculate:1. the mass, M2, of the Metal Part in units of grams2. the tension, 7, in the cable in units of N.Neglect the volume of the cable.At least two Free Body Diagrams (FBD's) will be required to solve for both m2 and T.Draw and label FBD's in your analysis,•The values will be small due to the small size of the parts. Trust your calculations.Unit checks are critical.Wood Block:50 x 50 x 10 mm) 2.5 mmSgWB 0.30010 mm(2)H,0, 15°CMetal Part6600 mm2

Answered: Image /qna-images/answer/dbe02ab4-6929-488b-9e1f-ef129027f31a.jpg

) As shown in the figure below, a Metal Part (Object 2) is submerged in water (@ 15°C) and suspended from a partially submerged Wood Block (Object 1) by a cable. Calculate: 1. the mass, m2, of the Metal Part in units of grams 2. the tension, T, in the cable in units of N. Neglect the volume of the cable. At least two Free Body Diagrams (FBD's) will be required to solve for both m2 and T. Draw and label FBD's in your analysis. The values will be small due to the small size of the parts. Trust your calculations. Unit checks are critical. Wood Block: 50 x 50 x 10 mm 1) 2.5 mm S9WB = 0.300 10 mm (2) H20, 15°C Metal Part: 6600 mm3

) As shown in the figure below, a Metal Part (Object 2) is submerged in water (@ 15°C) and suspended from a partially submerged Wood Block (Object 1) by a cable. Calculate: 1. the mass, m2, of the Metal Part in units of grams 2. the tension, T, in the cable in units of N. Neglect the volume of the cable. At least two Free Body Diagrams (FBD's) will be required to solve for both m2 and T. Draw and label FBD's in your analysis. The values will be small due to the small size of the parts. Trust your calculations. Unit checks are critical. Wood Block: 50 x 50 x 10 mm 1) 2.5 mm S9WB = 0.300 10 mm (2) H20, 15°C Metal Part: 6600 mm3

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Piston The piston shown in figure is held in equilibrium by the pressure of the gas flowing through the pipe. The pressures Pi = 350 kPa, p = 130 kPa, and pressure of the gas p 210 kPa. Find the mass of the piston. Ans: 80.1 kg „II k10 cm Pipe 20 cm Hints: Consider a free body diagram of the piston and identify the different forces the piston is subjected to get the weight of the piston. numerically equal to its mass since g is not given meaning at standard gravity. The weight of the piston is gas III
Fluid Force on a Tank Wall :- In the given question/s find the fluid force on the vertical side of the tank, where the dimensions are given in feet.Assume that the tank is full of water :- (see the figure as attached here).
A person is 1.65 m tall. a. Calculate the difference in blood pressure between the feet and top of the head of this person. To make sense of your answer, convert your answer to the unit of atm (101325 Pa = 1 atm). The density of blood is Pblood = 1.06 × 10³ kg/m³. b. Consider a cylindrical segment of a blood vessel 2.00 cm long and 1.50 mm in diameter. What additional outward force would such a vessel need to withstand in the person's feet compared to a similar vessel in her head? c. Justify how you solved for the area of the blood vessel.
Buoyance is an upward force exerted by a fluid that opposes the weight of a partially or fully immersed object. The upward buoyant force is calculated via the following equation: Fp = PfgV V is the volume of displaced fluid (object), pf is the density of the fluid, and F, is the buoyant force. 1) Calculate the buoyant force on 10 tons of solid steel completely submerged in water and compare this with the steel's weight with the density of 7800 kg/m³. (b) What is the maximum buoyant force that water could exert on this same steel if it were shaped into a boat that could displace 12m3 of water?
A crane is used to lower a 0.4 m concrete block (density, p = 2200 kg/m') into the sea (density, p = 1012 kg/m) for an underwater construction project as shown in Figure 2. (Taking in consideration that the gravitational acceleration, g = 9.81 m/s? Determine: a. The mass of the block. b. The original weight of the block. c. The buoyant force (FB) on the block (Weight of water displaced). The apparent weight of the block when it is fully merged in the sea. What is your grandmother name? AF crane sea W Fg Figure 2: Concrete Block
Q3:- The density of liquid water is p = 1008 - [kg/m] with T in C. If the temperature increases, what happens to the density and specific volume? T 50 80 100
A crane is used to lower a 0.4 m³ concrete block (density, p = 2200 kg/m³) into the sea (density, p = 1012 kg/m') for an underwater construction project as shown in Figure 2. (Taking in consideration that the gravitational acceleration, g = 9.81 m/s? Determine: a. The mass of the block. b. The original weight of the block. c. The buoyant force (FB) on the block (Weight of water displaced). d. The apparent weight of the block when it is fully merged in the sea. e. What is your grandmother name? crane sea W FB Figure 2: Concrete Block
If solving the question in 3D calculations is difficult, then use the 2D system to determine the equations of the filuid pressure. Select one: O True O False A beaker is filled with a liquid of density p1 up to a certain height. A is a point, h m downwards from the free surface of the liquid as shown. The liquid is replaced by equal volume of another liquid of density p2. If p1 > p2, how will the pressure at point A change? Free Surface Base a) remain same b) increase c) decrease d) become zero Select one: O A B O C D.
:06 Escape from a Sinking Car Assume you are in a car that ran into water and is sinking. The car door is 43 inches wide and 24 inches tall. Assuming you can push 90 lbs at 28 inches from the door hinge. At what water height on the door would you be unable to open the door? Use Weight Density of water = 64 lbs/ft³. Water Height = in.
We first make equilibrium equations for the fluid pressure and then the free body diagram and then solve the question? Select one: O True O False ZFx=0, EFy=0 and EFz=0 are vector equations for the determination of the equilibrium equations for the fluid pressure in the body immersed in the liquid. Select one: O True O False A beaker is filled with a liquid of density p up to a height h. If half the liquid is replaced by equal volume of another liquid of twice the density, what will be the change in the base pressure? "PA h Ih/2 a) increased by pgh b) decreased by pgh c) increased by pgh-2 d) decreased by pgh=2 Select one: O A O B O C
Q4: Find the pressure of water at points 2,3,4,5 and 6 if the confined pressure at point 1 is p 2.943 (Bar) shown Figure 3. Find the pressure at points 7 and 8. All values of pressure should be in (Bar). PO=2.943Bar gage (2) (1) (8 c.g confined 7 c.g 8m water (4) (5 6 Figure 3 Q5: Three different liquids and compressed air are in the tank shown in Figure 4, if the values of a 2 (m), b 5 (m), c 1 (m), Pca = 12 (mm column height of Hg), Poil = 800 (Kg/m³), pwater = 1000 (kg/m³), PH.L. = 1600 (kg/m³), GHg = 13.6, Yw = 9.81 (kg/m³) and g = 9.81 (m/s?). Find the piezometric heads hA, hB, and hc. Compresses Air Pca hA Oil 2 hB Water hC 3 Heavy Liquid 4 Figure (4)
1. If the level of the liquid measured by using capacitive probe and buoyant force is same, find the equation of the capacitance due to liquid level in terms of the buoyant force on the cylindrical displacer (used in level measurement using buoyant force). You can assume the data required in the variable form. Consider cylindrical vessel and displacer.