An overhanging beam ABC is supported and loaded as shown in Figure Q2(a). The beamwith a T cross section has a longitudinal hole, (20x20) mm throughout its length, FigureQ2(b). If the beam is made of a material having an allowable bending stress, (øallow)e = 80MPa in compression and (øallow) = 100 MPa in tension. Determine:i. The magnitude of the maximum load P that can be applied to the beamii. The bending stress at the top of the hole at section a-aP2 m2 m米2 m)BCiaFigure Q2 (a)160|20x20hole110NA50y= 8040100

Answered: Image /qna-images/answer/a5e01dae-611a-4d20-93c0-63fb9e771432.jpg

An overhanging beam ABC is supported and loaded as shown in Figure Q2(a). The beam with a T cross section has a longitudinal hole, (20x20) mm throughout its length, Figure Q2(b). If the beam is made of a material having an allowable bending stress, (Gallow)e = 80 MPa in compression and (øallo) = 100 MPa in tension. Determine: i. The magnitude of the maximum load P that can be applied to the beam ii. The bending stress at the top of the hole at section a-a 2 m 2 m 2 m B C Figure Q2 (a) 160 110 NA 20x20 hole y-80 40 100

An overhanging beam ABC is supported and loaded as shown in Figure Q2(a). The beam with a T cross section has a longitudinal hole, (20x20) mm throughout its length, Figure Q2(b). If the beam is made of a material having an allowable bending stress, (Gallow)e = 80 MPa in compression and (øallo) = 100 MPa in tension. Determine: i. The magnitude of the maximum load P that can be applied to the beam ii. The bending stress at the top of the hole at section a-a 2 m 2 m 2 m B C Figure Q2 (a) 160 110 NA 20x20 hole y-80 40 100

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

%3D QUESTION 2. An oblique bending moment of M = 5 kN.m is applied on the cross-section of an aluminum beam as shown in the figure. (a) Calculate the maximum values of compressive and tensile normal stresses on the crss section. (b) Define the orientation of the neutral axis and draw on the cross-sectionç. M = 5 kN.m 30° 10 mm 40 mm 10 mm A-40 mm--r: 30 mm 30 mm 10 mm 10 mm
The simply supported beam is subjected to the loadings shown in Figure Q2. Determine the value of P if the allowable shear stress is 50 MPa. 20 mm PAN 30 kN/m 20 m 200 mm 20 mm 5m 5m 100 mm Crosssection Figure Q2
The cross-sectional dimensions of the beam shown in the figure are a = 4.0 in., b = 4.7 in., d = 4.1 in., and t = 0.30 in. The internal bending moment about the z centroidal axis is Mz = -3.90 kip-ft. Determine (a) the maximum tension bending stress (a positive number) in the beam. (b) the maximum compression bending stress (a negative number) in the beam.
Problem #1 A rigid beam is supported by bar DE. If the vertical displacement of point D is to be less than 0.1 in, what is the minimum cross-sectional area of bar DE? Assuming that area, what is the stress state at p in the coordinate system shown? 12 ft 800 lb -5 ft B 800 lb 5 ft Bar DE: E 30000 ksi v = 0.29 point p to 6 ft E
The beam is subjected to a bending moment of M = 17 kN. m. σA = B 200 mm OB = 30 mm 30 mm M 30 mm 30 mm 50 mm 150 mm 150 mm 50 mm Part A Determine the bending stress in the beam at point A. Express your answer to three significant figures and include the appropriate units. Enter negative value in the case of compression and positive in the case of tension. ANSWER: Q Tap image to zoom Part B Determine the bending stress in the beam at point B. Express your answer to three significant figures and include the appropriate units. Enter negative value in the case of compression and positive in the case of tension. ANSWER:
A simple beam is subjected to two concentrated loads as shown. The beam section is a rectangular one, A = b×h and k = 1.2.Parameters G, E, I, M, V, and A. Please find a. The strain energy (ub and us) of the deformed beam under the applied loads. The strain energy ub due to bending and another one us due to shear. b.The deflection at mid-span due to bending and shear.
6. A simply supported beam and its cross-section is shown in the figure. a- Draw the complete shearing force and bending moment diagrams. b- Determine the value of the side of the square (a) if the safe bending stress in the material is 100 MN/m?. c- Determine the maximum shearing stress in a section 1.3 m from A. 10KN/m 15KN.m a a A B a a 2m 2.5m 5m Cross section
The cross-sectional dimensions of the beam shown in the figure are a = 4.6 in., b = 5.7 in., d = 4.9 in., and t= 0.31 in. The interna bending moment about the z centroidal axis is M_= -4.45 kip-ft. Determine (a) the maximum tension bending stress (a positive number) in the beam. (b) the maximum compression bending stress (a negative number) in the beam.
PROBLEM 1: The frame shown in the figure is carrying a traingular distributed load. Pins at A and B are forced in single shear while the pin at C is forced in double shear. If the allowable tensile stress of bar BC is 300 MPa and the allowable shear stress of pins is 150MP3; (a) The cross sectional area of BC (b) The required diameters of pins A, B and C as multiples of mm. w = 8 kN/m 6 m 5 m 3 m
A clamped beam is loaded by a uniformly distributed force of w=2 kN/m as shown in the figure. The allowable tensile stress of the beam material is 90 MPa and the allowable compressive stress is 300 MPa. a) Locate the section that is critical for the bending stress values and calculate the bending moment value on this section. b) Figure out if the beam can carry the distributed load safely. 90 mm 10 mm W 90 mm 10 mm 1 m 1 m A -1.5 m -1.5 m-
The cross-sectional dimensions of the beam shown in the figure are a = 4.1 in., b = 5.6 in., d = 5.0 in., and t = 0.33 in. The internal bending moment about the z centroidal axis is M, = -3.50 kip-ft. Determine (a) the maximum tension bending stress (a positive number) in the beam. (b) the maximum compression bending stress (a negative number) in the beam. b y |(typ.) d a a Answers: (a) OmaxT= psi (b) Omax C= psi
PROBLEM SET 1 A rigid bar AB is hinged to a vertical wall and supported horizontally by a tie bar CD as shown in the figure, The tie bar has a cross sectional area A=0.10in² and its allowable stress in tension is 20,000 psi. Find the safe value of the magnitude of the load P and the corresponding vertical deflection AB of point B. The tie-bar has a modulus of elasticity of E=30x106 psi. P B C 4ft D A 3ft