An appliance manufacturer produces two models of microwave ovens: H and W. Both models requires fabrication and assembly work; each H uses four hours of fabrication and two hours of assembly, and each W uses two hours of fabrication and six hours of assembly. There are 600 fabrication hours available this week and 480 hours of assembly. Each H contributes $40 to profits, and each W contributes $30 to profits. What quantities of H and W will maximize profits? 1. Formulate an LP Model (show the complete model formulation) Get the: ● Decisions Variable ● Objective Function Constraints ● 2. Show the Graphical Solution

An appliance manufacturer produces two models of microwave ovens: H and W. Both models requires fabrication and assembly work; each H uses four hours of fabrication and two hours of assembly, and each W uses two hours of fabrication and six hours of assembly. There are 600 fabrication hours available this week and 480 hours of assembly. Each H contributes $40 to profits, and each W contributes $30 to profits. What quantities of H and W will maximize profits? 1. Formulate an LP Model (show the complete model formulation) Get the: ● Decisions Variable ● Objective Function Constraints ● 2. Show the Graphical Solution

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Three machines are used in a group-technology cell to process a family of five parts. Thetable below lists production quantities (Qj), production times (Tpij), and machine fractionsfor each family member (fij). Part E requires a changeover time of 5 min on each machine soit is produced in batches of 5 parts. Nonoperation times (Tno) are the same for all parts andmachines: 25 min per machine. Determine (a) average hourly production rate for the cell,(b) utilization of each machine and average utilization of the cell, (c) manufacturing leadtime, and (d) work-in-process. A spreadsheet calculator is recommended for this problem
Akdkfkcieneeididiwjej...... Show complete solution
As a building designer, you have been asked to analyze and select the bestwindow frame type alternative—either aluminum or steel. The project is located in a remotearea, and the nearest industrial area hosting steel and aluminum windows framesmanufacturers is 250 km away. All project windows are identical, and the circumference ofthe window frame is 6.2 meter. A crew of two labors is required to manufacture one steelframe. It takes 2.5 hours to manufacture the first window every day, and the learning rate is0.9. The number of production units is per day is limited to 8. The weight of steel is 12 kg permeter, and the weight of aluminum is 4.5 kg per meter. The cost of steel is 0.4 OMR per kgand the cost of aluminum 1.1 OMR per kg. If 45 windows frames are required for the project,the crew cost is 3 OMR per hour for steel frames and 3.6 for aluminum frames, and thetransportation, price is 0.01 OMR per kg per 50 km, which alternative would you select?
1.Convert 21 inches of Hg (vacuum, gauge) to kPa (absolute) 2. Trays which hold 10 ounces are being processed in a continuous retort. The cook zone of the retort is 120 inches long. The belt speed is 2.1 feet per minute. If the trays are 5 inches wide and spaced 1 inch apart on the belt, what is the production rate of the system in trays per hour? What is the production rate in kg per hour? What is the exposure time of a tray in the cooking zone in minutes? 3. A differential pressure sensor is attached across the two effects in an evaporator reads 5.6 psi with the high side attached to the first effect. A separate gauge on the first effect reads 9.21 inches Hg (vacuum). What are the pressures of the first and second effects in kPa absolute?
1. DREZ Inc. has three departments, each of which houses variety of manufacturing equipment. One department has six machines listed in the table. Note: Add 10 feet each side of the first two machines types and 8 feet to the others to allow for operators access, material handling carrier access and work-in process storage. Machine Typе Length(ft) Width(ft) No. of machines Hobbing 10 1 Punch Press 10 10 1 Extruding Equipment Injection Molding Surface Finishing 20 10 2 10 10 3. 5 5 4 Debburing 10 10 Compute the total space requirement of the cell considering the following assumptions for each equipment type: a. Auxiliary space requirement is 10% of those machine area b. Operator space is 8% of the required of the auxiliary and machine space С. Material storage is 20% of the actual area required for machines d. Additional allowance is 80% of the areas determined in a,b.c and machine area.
Step by step solutions
Q1. A power-shift crawler tractor is excavating hard materials of earth (clay) and pushing it a distance of 100 ft. The hourly cost of a power-shift crawler tractor is $200. Maximum reverse speeds are: first range, 6 mph; second range, 9 mph; and third range, 11 mph. Rated blade capacity is 18 LCY. Estimate dozer production if the job efficiency factor is 50 min/hr and what is the expected unit cost for dozer work ($/BCY)?
What is the relationship between the goals of a process system and the risk associated with that system? (1 page max.)
Please provide steps on how to derive the output of each container.
please explaine step by step
Please Solution Step by Step
i need the solution im newly subscribed