An AC voltage source of 100V and 50HZ is supplying a coil that has an inductance of 180 mH in series with a resistance of 25 Q as shown below. Calculate: R Ims 100Vms 50HZ The power factor Oa. 0.424 Lagging Ob. 0.404 Lagging Oc. 0.384 Lagging Od. 0.444 Lagging The apparent power consumed а. 161.7 VA Ob. 166.7 VA Oc. 156.7 VA Od. 151.7 VA

An AC voltage source of 100V and 50HZ is supplying a coil that has an inductance of 180 mH in series with a resistance of 25 Q as shown below. Calculate: R Ims 100Vms 50HZ The power factor Oa. 0.424 Lagging Ob. 0.404 Lagging Oc. 0.384 Lagging Od. 0.444 Lagging The apparent power consumed а. 161.7 VA Ob. 166.7 VA Oc. 156.7 VA Od. 151.7 VA

Power System Analysis and Design (MindTap Course List)

6th Edition

ISBN:9781305632134

Author:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Publisher:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Chapter2: Fundamentals

Section: Chapter Questions

Problem 2.27P: An industrial load consisting of a bank of induction motors consumes 50 kW at a power factor of 0.8...

See similar textbooks

Similar questions

What impedance vector (0- j15) Ohms represents:A. A pure resistance. C. A pure capacitance.B. A pure inductance. D. An inductance combined with a capacitance.
A capacitor has a reactance of 40 when operated on a 50 Hz supply. Determine the value of its capacitance. In a series R–L circuit the p.d. across the resistance R is 12V and the p.d. across the inductance L is 5V. Find the supply voltage and the phase angle between current and voltage
A capacitor "C", an inductor "L" and a switch "S" are connected in series. When the switch is open, the plate to the left of the capacitor has charge "Qo". The switch is closed the load and current vary sinusoidally with time. Represent graphically the load "Qo" and the intensity of current "I" as a function of time "t", and explain why the current leads the load by a phase difference of 90°.
A chopper circuit has an inductive load of 2ohm resistance and 10mH inductance. If the source voltage is 20 V and the frequency of the chopper is set to 100Hz and the on-time to 5 ms. Determine the average voltage and current, maximum and minimum load currents.
A 10.0-μF capacitor and a 2.00-H inductor are connected in series with a 60.0-Hz source whose rms output is 100 V. Finda. the rms current in the circuit.b. the voltage drop across the inductor. c. the voltage drop across the capacitor.
the parallel connection of a resistor and a capacitor takes 0.6 A rms from a 120 V rms voltage source. Given the 0.7 leading power factor, find the resistance and capacitance at 400Hz.
An electrical circuit with a sinusoidal voltage source, a resistor, and a capacitor all connected in series. The voltage across the capacitor: Select one: a. Leads the current in the capacitor by exactly 90o b. Is in phase with the sinusoidal voltage source c. Is in phase with the voltage across the resistor d. Leads the current in the circuit by 90o e. Lags the current in the circuit by 90o
A capacitor C is connected in series with a 400 resistor across a supply of frequency 60 Hz. A current of 3 A flows and the circuit impedance is 500. Calculate: (a) the value of capacitance, C, (b) the supply voltage, (c) the phase angle between the supply voltage and current, (d) the p.d. across the resistor, and (e) the p.d. across the capacitor. Draw the Phasor diagram.
A pure inductance of 1.273mH is connected in series with a pure resistance of 30ohms. If the frequency of the sinusoidal supply is 5kH and the p.d. across the resistor is 6V. Determine the value of the supply voltage in across the inductance.
A coil of power factor 0.4 is in series with a 50-μF capacitor. The p.d. across the coil is equa to the p.d. across the capacitor when the combination is connected across a 50 Hz supply. Determine the resistance and Inductance of the coil.
What is the value of capacitance if the capacitive reactance is 50 Q .Assume frequency of supply as 50 Hz ? a. 53.3x10-5 F O b. 5.3x10-5 F c. 6.36x10-5 E d. 63.3x10-5 F
a) The voltage across a 20uF capacitance is v. = 50 sin( at - 80) volts and Frequency equal to 100 Hz. Determine the current through the capacitor i and sketch its waveform. b) Define phasor