A mechanical system is depicted in the figure below. A pinion with fixed rotation axis passing through C2 meshes with a translatory rack of mass m = 0.8 kg. The rack, which is supported on two identical guides (bearings), each of damping coefficient c = 12 N s/m, meshes with another solid pinion that, as a result, rolls without slippage on another fixed rack. Derive the differential equation describing the movement of the system. Determine transfer function G(s) = X(s)/F(s) where X(s) is the Laplace transform of x(t) and F(s) is the Laplace transform of f (t). Find x(t) if the input is f(t) = 80(t) = step function. The system parameters are: J1 = 0.001 kg m² and J2 = 0.0003 kg m², m̟ = 0.4 kg, the radii R1 = 0.05 m, R2 = 0.07 m, R = 0.06 m, the stiffness k = 160 N/m, %3D a. b. C. Pinion R Rack Guide A R1 Pinion R2 Fixed rack

A mechanical system is depicted in the figure below. A pinion with fixed rotation axis passing through C2 meshes with a translatory rack of mass m = 0.8 kg. The rack, which is supported on two identical guides (bearings), each of damping coefficient c = 12 N s/m, meshes with another solid pinion that, as a result, rolls without slippage on another fixed rack. Derive the differential equation describing the movement of the system. Determine transfer function G(s) = X(s)/F(s) where X(s) is the Laplace transform of x(t) and F(s) is the Laplace transform of f (t). Find x(t) if the input is f(t) = 80(t) = step function. The system parameters are: J1 = 0.001 kg m² and J2 = 0.0003 kg m², m̟ = 0.4 kg, the radii R1 = 0.05 m, R2 = 0.07 m, R = 0.06 m, the stiffness k = 160 N/m, %3D a. b. C. Pinion R Rack Guide A R1 Pinion R2 Fixed rack

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

For the system shown below, the disc of mass M rolls without slip. Assume that the mass M = 11 kg, the damping constant C - 209 Ns/kg and the stiffnesses K, = 9,036 N/m, K2 = 4,855 N/m, the radius of the disc R = 0.4 m and the moment of inertia of the disc about its centre I = MR² What is the damping ratio of the free vibration of this system? www K2 K1 M *No Slip
A simple single degree of freedom model of a wheel mounted of a spring as shown in figure below .the friction in the system is such that the wheel rolls without slipping. Calculate the natural frequency of oscillation using the energy method .Assume that no energy is lost during the contact x(t) k m,J The rotation of the wheel (of radius r) is given by 0(t) and the linear displacement is denoted by x(t). The wheel has mass ( m) and moment of inertia (J) ,and the spring has stiffness (k ).
3. Imagine a door which can swings into and out of a room. The door has a closer with a spring stiffness of 71 N-m/rad and damping of 7.5 N-m-s/rad and mass moment of inertia of the door with respect to the hinge is 20 kg-m?. If the door is held open and then let go from an angle of 50 degrees, how long will the door continue to swing into and out of the room? How many times will it swings before it will closed? Assume that the door is considered closed when the amplitude has decreased to 2.5 degrees. Assume that small angle approximation holds, such that sin(theta) = theta. %3D
The door shown in the figure is equipped with a torsional spring of stiffness 25 Nm/rad and a torsional viscous damper c so that it automatically returns to its closed position after being opened. The door has a mass of 60 kg and a centroid moment of inertia about axis AB parallel to the door's axis (Oz) of 7.2 kgm^2. a. What is the damping coefficient such that the system is critically damped? b. What is the initial angular velocity of the door so that the door is opened 70 degrees? How long will the door return to 5 degrees of completely closing? c. Repeat a and b if the door is designed with a damping ratio of 1.3.
Two identical thin bars, each of mass m and length L, are welded together at a right angle as shown in figure 1. This T-shaped assembly is pinned to ground at point 0. Block B is given a prescribed forced displacement xg = b sin øt. Friction and damping are neglected. a) Derive the equation of motion for the system in terms of the angular position of the bars, 6, and parameters m, L, k, and g; b) Derive an expression for the natural frequency of the system; c) Derive an expression for the forced angular response of the system; L/2 L/2 L Хв
Figure 1 shows a system comprising a bar with mass m-12 kg and the length of the bar L=2 m, two springs with stiffness kt=1000 N-m/rad and k = 2000 N/m, one damper with damping coefficient c=50 N-s/m and two additive masses at the end of the bar, where each mass (M) is equal to 50 kg. The rotation about the hinge A, measured with respect to the static equilibrium position of the system is 0 (t). The system is excited by force (F) so find the state space representation of the system if the output y=ġ(t).
The mass m in the given figure is attached to a rigid rod with an inertia /about the pivot and negligible pivot friction. The input is the displacement z. When z= 0 = 0, the spring is at its free length. k ww L3 I a. Assuming that 0 is small, identify the equation of motion for e with z as the input. (Submit for Feedback using Connect) b. Use the Laplace transform method to determine the characteristic equation for this system. c. Solve this for the step response, 0(t), for the following system parameters and if the amplitude of the input step is z = 4 mm: System_Parameters = (k = = 100000.0 c = 1200.0 L = 0.03 L2= 0.04 L = 0.1 m= 2.0 I= 0.8 g=9.81 units : k - N; c~~ N.s. L1, L2, L2 ~ m; M ~ kg; 1 ~ kg · m²; g ~ ; m. m m
A uniform rod of mass m is pivoted at a point O as shown in Figure 2. The rod is constrained by three identical linear springs, and a point mass M is attached at the end of the rod (also shown in Figure 2). The parameters of the system are as follows: L= 1 m, k = 1000 N/m, m= 50 kg, M = 25 kg. i. Derive the equation of motion of the system in terms of the angular displacement (0). Choose O as the clockwise angular displacement of the rod from the system's static equilibrium position.
Consider the double mass/double spring system shown below. - click to expand. Both springs have spring constants k, and both masses have mass m; each spring is subject to a damping force of F friction We can write the resulting system of second-order DEs as a first-order system, w'(t) = Aw(t), with w = (x₁, x₁, x₂, x₂) T For values of k = 4, m = 1 and c = 21,2 = 0.5±3.2i, V₁ 23,4= - 0.5 ± 1.13i, V3 1, the resulting eigenvalues and eigenvectors of A are -0.039 0.248i 0.813 0.024 +0.153i -0.502 -0.134-0.302i' 0.409 -0.216 - 0.489i 0.661 and (a) Find a set of initial displacements x₁(0), x₂(0) that will lead to the fast mode of oscillation for this sytem. Assume that the initial velocities wil be zero. (x₁(0), x₂(0)) Enter your answer using angle braces, (and ). cx (friction proportional to velocity). (b) At what frequency will the masses be oscillating in this mode? Frequency = rad/s
Consider the system shown in the figure in which a harmonic force acts on the mass m. Derive the condition under which the steady-state displacement of mass m will be zero. Disc, mass M Rolls without slipping Pulley Cord Fo sin ot m
QI Calculate the frequency of damped oscillation of the system shown in Figure () for the value m = 1.75 kg,c 350 N. s /m, k =7 x 107 N Am, a = 1.25 m and b = 2.5 m. If the mass pulled down 10' find the response of the system after cycle. I, mb² rigid link
Given the vibrating system below: K4 K2 K1 K3 m C4 C2 C1 C5 C3 F(t) = 200cos20t M = 10 kg K1=100 N/m K2= 80 N/m K3=75 N/m K4= 120 N/m C1 = 20Ns/m C2= 40 Ns/m C3= 35Ns/m C4= 15 Ns/m C5= 10 Ns/m Solve for the following: 1. Equation of motion x(t). Assume Initial conditions for displacement and velocity. 2. Graph 2 cycles of the vibrating system. You can use third party app for this. *** Show your correct and complete solution neatly in this vibration problem. ASAP! Thank you! ***