A liquid whose specific gravity is 2.0, is flowing in a 150mm diameter pipe. The total head at a given point was found to be 17.5m. That point is 3m above the datum and the pressure in the pipe is 65.6KPa. Compute the discharge in that point of the pipe. Hide answer choices No Answer among the choices B) 29.05 L/s C) 24.31 L/s 19.28 L/s (E32.561/5

A liquid whose specific gravity is 2.0, is flowing in a 150mm diameter pipe. The total head at a given point was found to be 17.5m. That point is 3m above the datum and the pressure in the pipe is 65.6KPa. Compute the discharge in that point of the pipe. Hide answer choices No Answer among the choices B) 29.05 L/s C) 24.31 L/s 19.28 L/s (E32.561/5

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

The water surface shown below is 10 m above the datum. The pipe is 425 mm in diameter and the total loss of head between point (1) in the water surface and point (5) in the jet is 3 m. Determine the discharge Q. (m3/s). Round your answers in 3 decimal places.
A liquid whose specific gravity is 2.0, is flowing in a 50mm diameter pipe. The total head at a given point was found to be 17.5m. That point is 3m above the datum and the pressure in the pipe is 65.6KPA. Compute the discharge in that point of the pipe. (A 24.31 L/s B) 29.05 L/s (c) No Answer among the choices 32.56 L/s E) 19.28 L/s
A liquid whose specific gravity is 2.0, is flowing in a 50mm diameter pipe. The total head at a given point was found to be 17.5m. That point is 3m above the datum and the pressure in the pipe is 65.6KPA. Compute the discharge in that point of the pipe. (A 19.28 L/s B No Answer among the choices 24.31 L/s D 29.05 L/s (E 32,56 L/s
A discharge of 8.5 liters/sec of oil having specific gravity of 0.80 occurs through the venturi meter. The diameter of the pipe is 37.5 mm while that of the throat is 25 mm. The liquid in the differential gage contains mercury having specific gravity 13.6 and the rest is filled with oil, A. Find the velocity at the throat? B. Determine the values of h1 and h2?
a. The diameter of a 3 meter pipe decreases from 450 mm to 150 mm. If the velocity is to decrease uniformly in a linear manner, draw the diameter profile at each 500 mm length interval along the pipe. Discharge is 150 liters per second. b. The same venturi meter described in letter a is used to measure the discharge for a length of pipeline that was suspected to have had water stolen through an illegal connection. Before said suspected illegal connection, a mercury difference of 350 mm was observed while a mercury difference of 200 mm was observed afterwards. Estimate the stolen volume of water per day.
Compute the actual discharge from a standard 5 cm diameter orifice under a head of 3 m of water if Cc=0.607 and Cv=0.98. a. 95 L/s b. 90 L/s c. 85 L/s d. 100 L/s With FBD
formula: trial No. Date Determination of Discharge Thru a Siphon Vol . Q= Q=AV t ) P1 P2 +21=(√₂) ² 29 +²²2² +22 r Y trial #2 trial #3 += 75 t = 5s Y = 340ml V: 250mL the table below I chow calculation please). 1 H (m) 1 Theoretical Actual + Discharge (s) + Discharge (L/₁) (V1)2 29 h = 63.5cm trial #1 t= 10s V = 490 mL complete + time(s) Volume (ml) 1 % Difference
Compute the actual discharge from a standard 5 cm diameter orifice under a head of 3 m of water if Cc=0.607 and Cv=0.98. Include fbd. a.95 L/s b.85 L/s c.90 L/s d.100 L/s
2. A discharge of 8.5 L/s of oil having a sg=0.8 occurs through the venturi shown. The diameter of the pipe is 37.5 mm while that of the throat is 25 mm. The liquid in the differential gage shown contains mercury sg = 13.6 and the rest is filled with oil 37.5 mm A) Find the velocity at the throat (7.7 m/s) B) Compute for the value of h1 (0.8125 m) C) Compute for the value of h2 (0.238 m) oil mercury 25 mm h1 37.5 mm h2
A fire hose nozzle has a diameter of 1.125 in. According to some fire codes, the nozzle must be capable of delivering at least 250 2.750-in.-diameter hose, what pressure must be maintained just upstream of the nozzle to deliver gal/min. If the nozzle is attached to a this flowrate? Answer p= i psig
2.) an open cylindrical vessel having a height equal to its diameter is half filled with water and revolved about its own vertical axis with a constant angular speed of 130 rpm. find its minimum diameter so that there can be no liquid spilled. (Unit of the correct answer : meter) CHOICES a.) 2.43 b.) 0.423 c.) 0.342 d.) 0.234
M MEQ2.jpg 200mmø 690mm 300 mm 400 mmø Z Hg (13.6) A 200mm diameter venturi meter is installed in a 400mm diameter vertical main pipe as shown. If the deflection of mercury (SG = 13.6) at the manometer reads 300mm and the vertical distance between point 1 and point 2 is 690mm, determine the discharge in the system assuming a head loss of 600mm. Hide answer choices a A) 307.36 L/s B) 279.84 L/s No Answer among the choices D) 224.67 L/s 256.29 L/s O O O O C