:)A 1200 N uniform boom at o = 65.0 degrees to the horizontal is supported by a cable at an angle 0 = 25.0 degrees to the horizontal. The boom is pivoted at the bottom, and an object of weight m= 2.00E3 N hangs from its top. Find (a) the tension in the support cable and (b) the components of the force exerted by the floor on the boom (through the hinge).

:)A 1200 N uniform boom at o = 65.0 degrees to the horizontal is supported by a cable at an angle 0 = 25.0 degrees to the horizontal. The boom is pivoted at the bottom, and an object of weight m= 2.00E3 N hangs from its top. Find (a) the tension in the support cable and (b) the components of the force exerted by the floor on the boom (through the hinge).

International Edition---engineering Mechanics: Statics, 4th Edition

4th Edition

ISBN:9781305501607

Author:Andrew Pytel And Jaan Kiusalaas

Publisher:Andrew Pytel And Jaan Kiusalaas

Chapter4: Coplanar Equilibrium Analysis

Section: Chapter Questions

Problem 4.125P: The figure shows a three-pin arch. Determine the horizontal component of the pin reaction at A...

See similar textbooks

Similar questions

The uniform ladder of weight W is raised slowly by applying a vertical force P to the rope at A. Show that P is independent of the angle .
Find the magnitude of the pin reaction at B caused by the weight W=80lb. Neglect the weights of the members.
Compute the tension TAE in Sample Problem 5.7 using one scalar equilibrium equation.
The figure shows a three-pin arch. Determine the horizontal component of the pin reaction at A caused by the applied force P.
Find the internal force system acting on section 3 for the pin-connected frame.
A 50 kg pole extends up a wall, making a 60° angle with the wall. The pole is supported by acable attached 3/4 of the way along the pole. This support cable is perpendicular to the wall.A 10 kg sign hangs from the end of the pole. The pole’s center of mass is 1/3 of the way fromthe wall to the end of the pole. (a) What is the tension in the cable?(b) What are the x and y components of the force the wall exerts on the pole?You must include an extended free body diagram showing all forces acting on the pole. Labelthe location on the pole you will use a reference for measuring distances (the “axis of rotation”) at the point where the pole touches the wall. Thank you!
4.00 kg block is attachedto a vertical rod by meansof two strings. When the systemrotates about the axis of the rod,the strings are extended as shownin Fig. and the tensionin the upper string is 80.0 N. (a)What is the tension in the lowercord? (b) How many revolutionsper minute does the system make?(c) Find the number of revolutionsper minute at which the lowercord just goes slack. (d) Explainwhat happens if the number ofrevolutions per minute is less thanthat in part (c).
A uniform horizontal strut weighs 425 N. One end of the strut is attached to a hinged support at the wall, and the other end of the strut is attached to a sign that weighs 235 N. The strut is also supported by a cable attached between the end of the strut and the wall. Assuming that the entire weight of the sign is attached at the very end of the strut, find the tension in the cable and the force at the hinge of the strut. Image Description T= Fhinge = N N 30° Restaurant
A 400 N gas sign hangs from the end of a uniform strut BC. The strut is 4 m long and weighs 600 N. The strut is supported by a hinge at the wall at C and by a cable whose other end is tied to the wall at point A 3.0 m above the left end of the strut. Find the tension in the supporting cable and the force of the hinge on the strut. 5.0 m 3.0 m 4.0 m B GAS TAB= 1333 N TAB= 1167 N TAB= 400 N TAB= 1000 N leave the question 4 Other: Q 4 4 points Rc= 980 N O Rc= 360 N Rc= 890 N Rc= 1085 N O O O O O O O
A uniform horizontal strut weighs 370.0 N. One end of the strut is attached to a hinged support at the wall, and the other end of the strut is attached to a sign that weighs 170.0 N. The strut is also supported by a cable attached between the end of the strut and the wall. Assume that the entire weight of the sign is attached at the very end of the strut. 30° Restaurant Find the tension in the cable (in N). Find the force (in N) at the hinge of the strut. (Give the direction in degrees counterclockwise from the +x-axis. Assume that the +x-axis is to the right.) magnitude direction °counterclockwise from the +x-axis
For the stepladder shown in the figure, sides AC and CE are each 2.90 m long and hinged at C. Bar BD is a tie-rod 0.688 m long, halfway up. A man weighing 684 N climbs 2.18 m along the ladder. Assuming that the floor is frictionless and neglecting the mass of the ladder, fınd (a) the tension in the tie-rod and the magnitudes of the forces on the ladder from the floor at (b) A and (c) E. (Hint: Isolate parts of the ladder in applying the equilibrium conditions.) C E
Q2: The figure shows the cross section AB of a garage door which is a rectangular 2.5-m by 5-m panel of uniform thickness with a mass of 200 kg. The door is supported by the struts of negligible mass and hinged at O. Two spring-and-cable assemblies, one on each side of the door, control the movement. When the door is in the horizontal open position, each spring is unextended. If the door is given a slight imbalance from the open position and allowed to fall, determine the value of the spring constant k for each spring which will limit the angular velocity of the door to 1.5 rad/s when edge B strikes the floor. Ans. k = 1.270 kN/m 90° B\ | 2.5 m 1.25 m 1.25 m