A 10.00 g sample containing an analyte was transferred to a 250 mL volumetric flask and diluted to volume. When a 10.00 mL aliquot of the resulting solution was diluted to 25.00 mL it was found to give a signal of 0.235 (arbitrary units). A second 10.00 mL aliquot was spiked with 10.00 mL of a 1.00 ppm standard solution of the analyte and diluted to 25.00 mL. The signal for the spiked sample was found to be 0.502. Calculate the weight percent of analyte in the original sample.

A 10.00 g sample containing an analyte was transferred to a 250 mL volumetric flask and diluted to volume. When a 10.00 mL aliquot of the resulting solution was diluted to 25.00 mL it was found to give a signal of 0.235 (arbitrary units). A second 10.00 mL aliquot was spiked with 10.00 mL of a 1.00 ppm standard solution of the analyte and diluted to 25.00 mL. The signal for the spiked sample was found to be 0.502. Calculate the weight percent of analyte in the original sample.

Fundamentals Of Analytical Chemistry

9th Edition

ISBN:9781285640686

Author:Skoog

Publisher:Skoog

Chapter27: Molecular Fluorescence Spectroscopy

Section: Chapter Questions

Problem 27.13QAP

See similar textbooks

Similar questions

A 10.00-g sample containing an analyte was transferred to a 250-mL volumetric flask and diluted to volume. When a 10.00-mL aliquot of the resulting solution was diluted to 25.00 mL it was found to give a signal of o.235 (arbitrary units). A second 10.00-mL aliquot was spiked with 10.00 mL of a 1.00- ppm standard solution of the analyte and diluted to 25.0o mL. The signal for the spiked sample was found to be o.502. Calculate the weight percent of analyte in the original sample.
1. a 50.00-mL sample containging an analyte gives a signal of 11.5(arbitrary units). A second 50-mL aliquot of teh sample, which is spiked with 1.00-mL of a 10.0-ppm standard solution of the analyte, gives a signal or 23.1. what is the concentration of analyte in the original sample?
What are the differences between systematic and random errors and how do they effect accuracy and precision? In what circumstances would you use standard addition (versus a normal calibration curve) to determine the amount of an analyte in a sample? A urine sample, containing analyte Z is analysed by the standard addition method where 5 mL of the original sample was mixed with increasing amounts of a Z standard and each solution diluted to a volume of 50 mL prior to analysis. A plot of the final concentration of the standard in each of the 50 mL samples (x axis) versus The measured signal from the analysis of each 50 mL sample (on y axis) produced a straight line with the general equation: y = 44.72x + 4.06 what was the final concentration of Z in the 50 mL standard addition sample? what was the initial concentration of Z in the original urine sample?
3. The lead in a swab sample, lead standards, together with a blank were made up in 5.00 mL volumetric flasks using 0.2 % HNO3. 20 μL aliquots of these solutions were injected into the spectrophotometer and the absorbance measured at 217 nm. The following results were obtained. lead / ppb Absorbance 0 0.0591 10.00 0.0858 50.00 0.1926 100.0 0.3260 150.0 0.4594 200.0 0.5929 Swab sample 0.3700 (a) Determine the amount of lead in the swab sample in μg.
The determination of iron in wines was carried out by atomic absorption spectrophotometry, using the standard addition method. To do this, 10 mL of wine were placed in five 50 mL volumetric flasks; then 0, 5, 10, 15 and 20 mL of a 10 ppm iron standard solution were added to each of them. Next, they were gauged with distilled water and the absorbance was measured, obtaining the values of 0.040, 0.062, 0.081, 0.102 and 0.125 respectively. Calculate the regression parameters and obtain the iron concentration in the wine, in µg / mL.
Quantitative Analysis by External Standard Method Calcium in a juice sample is determined by atomic absorption spectrophotometry. A stock solution of calcium is prepared by dissolving 1.834 g of CaCl, 2H20 in water and diluting to 1000.0 mL. A substock calcium solution was prepared by transferring 10.00 mL of the stock to a 100.00 mL volumetric flask and diluting to the mark. Three standard solutions of calcium were prepared by transferring 2.500 mL. 5.00 mL and 10.00 mL of substock to 50.00 mL volumetric flasks and diluting to the mark. The sample is prepared by transferring 1.000 mL of fruit juice from the original bottle to a 25.00 mL flask and diluting to the mark. Strontium chloride is added to all solutions before dilution to avoid phosphate interference. Instrumental response of the standards is measured against the blank, and the following readings are recorded: 9.10, 18.6 and 37.0. The sampie reading is 28.1. Using the multipoint method, find the concentration of calcium in…
To determine the molar concentration of a metal ion in a solution of unknown concentration, a student fırst made five standard solutions that contain the metal ion of interest and measured the absorbance of each solution in a spectrophotometer at its Amax- A calibration curve was obtained that had an equation of y = 5.747 x + 0.013 Next, the student pipetted 15.0 mL of the initial solution of unknown concentration into a 100.0 mL volumetric flask, and filled the flask with deionized water to the line. The absorbance of this final diluted solution was found to be A = 0.226 at Amax. The color of the original and diluted solution was blue. What is the molarity of the original solution, as well as an approximate Amax for this metal ion? 2max = 599 nm and concentration is 0.247 M Amax 457 nm and concentration is 0.247 M %3D 2 max = 457 nm and concentration is 0.0371 M 1 max 599 nm and concentration is 0.0371 M Amax = 599 nm and concentration is 0.00557 M
Determine the mean paracetamol content per tablet (in mg), using the following values: the mean absorbance 0.13, and molar absorption coefficient 9601.9 M−1 cm−1 , where the equivalent half of one tablet mass of powdered paracetamol tablets transferred is 296.4 mg and the mean paracetamol tablet weight is 599.1 mg. Give your answer to TWO decimal places (you do not need to include the units in your answer below).
You are preparing a 100.0 mL standard solution needed for titration analysis. The NaOH (40 g/mol) pellets are measured to be 0.5341 g in a balance with acceptable uncertainty of +0.001 g. Mass of the pellets is recorded after taring the container. The pellets are put in a beaker and added with 50 ml distilled water measured by a graduated cylinder. The solution is then quantitatively transferred to a 100-mL volumetric flask with uncertainty of ±0.08 mL and diluted to a 100-mL mark. What is the concentration (M) of the solution and estimate its uncertainty by propagation? Assumption: There is no uncertainty in molar mass. Express your answer as C+/- u M.
Tonic water (20.0 mL) was added into each of two volumetric flasks (100 mL). The first flask was made up to volume with deionised water and produced an absorbance of 0.200. To the second flask was added an aliquot (20.0 mL) of a quinine standard solution (20.0 ppm) and after being made up to volume this produced an absorbance of 0.400. What is the concentration of quinine in the tonic water? a. 8.00 ppm b. 800 ppm С. 40.0 ppm d. 400 ppm е. 20.0 ppm
3) The solution taken from a factory waste sample to prepare an internal standard contains Pb + 2 and Ag + 2, and the analysis peaks were determined as 298 mAU and 324 mAU. To analyze the unknown, a solution containing 0.150 M, 50.0 mL of Ag + 2 is put into the unknown liquid and completed to 100.0 mL. When the peaks are measured again, 670 mAU and 856 mAU signals are read from the samples. What is the concentration of Pb + 2 in the unknown liquid?
professor Scimemi has accepted you as a Master’s student and you are involved in a project that studies the cellular basis of neuropsychiatric diseases. For your electrophysiology recordings you have to make a recording solution containing (in mM): 119 NaCl, 2.5 KCl, 2.5 CaCl2, 1 MgCl2, 26.2 NaHCO3, 1 NaH2PO4, 22 glucose. You need 800 ml of it. How much KCl do you need to weigh out? Hint: we only care about KCl here. (MW KCl is 74.55 g/mol