635 kg of fine aggregate and 910 kg of coarse aggregate are needed to be mixed for producing 1m3 of concrete. Fine aggregate had the moisture content of 2.5% and absorption of 3.2%, whereas the coarse aggregate had the moisture content of 1.35% and absorption of 2.41%. Find the amount of water required to increase the moisture contents of both fine and coarse aggregate to reach absorption?

635 kg of fine aggregate and 910 kg of coarse aggregate are needed to be mixed for producing 1m3 of concrete. Fine aggregate had the moisture content of 2.5% and absorption of 3.2%, whereas the coarse aggregate had the moisture content of 1.35% and absorption of 2.41%. Find the amount of water required to increase the moisture contents of both fine and coarse aggregate to reach absorption?

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

46.5 kg of fine aggregate is mixed with 72.3 kg of coarse aggregate. The fine aggregate has a moisture content of 2.0% and its absorption is 3.4% whereas the coarse aggregate has a moisture content of 1.3% and its absorption is 3.0%. Determine the amount of water required to increase the moisture content so that there is 1% free moisture in the aggregate blend.
A civil engineer wants to design a concrete mix design with the following criteria: Design a concrete strength: 25 MPa with a slump of 90 mm. Ignore the need for exposure Select a non-air entrained concrete Fine aggregates properties: Fineness modulus 2.67; Bulk specific gravity 2.66 Coarse aggregates properties: Maximum size aggregate of 25 mm with the bulk specific gravity 2.55 and dry-rodded mass 2000 kg/m3. Based on the criteria above 2.1. Calculate the required strength. 2.2. Calculate the water cement ratio. 2.3. Calculate the mix proportions of all materials including cement, water, fine aggregates, coarse aggregates, and air content for 1 m3.
A concrete mix consists of 5 gallons of water for each bag of cement. What is the expected compressive strength of this mix based on the compressive strength curve shown here? Given information: Weight of US standard cement bag = 94 lbs Water weight = 8.34 pounds per gallon COMPRESSIVE STRENGTH psi 6000 5000 4000 3000 2000 0.3 0.4 6000 psi 5000 psi 4000 psi 3000 psi NORMAL CONCRETE 0.5 0.6 W/C RATIO 0.7 MPa 42 35 28 21 14 0.8
An air-entrained concrete mix is required for a structure that is severely exposed to sulfate. Given: Required strength 35 MPa; slump 80 mm; Coarse aggregate: 19 mm nominal maximum size. The amount of water required for this mix and the corresponding air content respectively are Select one: O A. 190 Kg and 2% O B. 184 Kg and 6% O C. 184 Kg and 3.5% O D. 205 Kg and 2%
2. A sample of fine aggregate weighs 501.2 g when SSD and 491.6 g when OD. The flask weighs 540.6 g when filled with water and 843.1 g when filled with the aggregate sample and water. Calculate the bulk specific gravity, apparent specific gravity and percent absorption.
Compute for the corrected amount of water needed in the concrete mix if the mass of fine and coarse aggregates are 740 kg and 1100 kg, and both have a natural moisture content of 2% and 1.5% respectively. Water/cement ratio is 0.50 and the mass ratio of concrete is 1:2:3 o 216.3 kg o 171.9 kg o 170.2 kg o 153.7 kg Next.
3. A sample of coarse aggregate weighs 1072 g when ovendried, 1091 g when saturated surface- dried, and 667.6 g when submerged. Calculate the bulk specific gravity, apparent specific gravity, and absorption.
For the given concrete mix design below, calculate the field weight of the ingredients in kg's if the absorption capacities of both aggregates are 1%, total moisture content of coarse aggregate is 2% and the total moisture content of fine aggregate is 4%? Ingredient Weight in kg per m³ Cement 300 Water 150 1000 800 SSD Coarse aggregate SSD Fine aggregate Fine aggregate: Seç... ÷ Coarse aggregate: Seç... Seç Water: + ÷
What is maximum capacity of measure should be used in determining the density of the concrete if the nominal maximum aggregate size of coarse aggregate is 25.0 mm? a.) 11 Liters b.) 14 Liters c.) 6 Liters d.) 28 Liters
For concrete production, we mix 625 kg of fine aggregate and 830 kg of coarse aggregate. The fine aggregate has a moisture content of 2.3% and absorption of 3.2%, whereas the coarse aggregate has a moisture content of 1.5% and absorption of 2.8%. Calculate the amount of water required to increase the moisture contents of both fine and coarse aggregate to reach absorption?
In proportioning a concrete mix, the coarse and fine aggregates had the following properties respectively; Coarse: Dry weight: 800lb, 3,2% MC, 2.0% AC, Fine: Dry weight 350 lb, 1.2% MC, 2.9% AC. How much should the water be adjusted to account for the agregate moisture?
Read the question carefully and give me right solution according to the question. If you don't know the solution please leave it but don't give me wrong solution. Dry weight of coarse aggregate, fine aggregate and water for 1 m3 of one type of concrete requires 1100 kg, 680 kg and 175 liters, respectively. From laboratory test for, it is determined that absorption content of coarse and fine aggregates is 0.5% and 1.25%, respectively. Meanwhile, moisture content of coarse and fine aggregate is 0.75% and 1.0%, respectively. Determine weight of coarse aggregate, fine aggregate and water for one batch with volume of mixer of 800 liter.