16-34. For a short time a motor of the random-orbit sander drives the gear A with an angular velocity of VA = 40(t3 + 6t) rad/s, where t is in seconds. This gear is connected to gear B, which is fixed connected to the shaft CD. The end of this shaft is connected to the eccentric spindle EF and pad P, which causes the pad to orbit around shaft CD at a radius of 15 mm. Determine the magnitudes of the velocity and the tangential and normal components of acceleration of the spindle EF when t = 2 s after starting from rest. B 40 mm 10 mm A WA

16-34. For a short time a motor of the random-orbit sander drives the gear A with an angular velocity of VA = 40(t3 + 6t) rad/s, where t is in seconds. This gear is connected to gear B, which is fixed connected to the shaft CD. The end of this shaft is connected to the eccentric spindle EF and pad P, which causes the pad to orbit around shaft CD at a radius of 15 mm. Determine the magnitudes of the velocity and the tangential and normal components of acceleration of the spindle EF when t = 2 s after starting from rest. B 40 mm 10 mm A WA

Name: 16-34. For a short time a motor of the random-orbitsander drives the
Uploaded: 2024-03-20T06:56:55.000Z
Channel: Bartleby
Description: 16-34. For a short time a motor of the random-orbitsander drives the gear A with an angular velocity ofVA = 40(t3 + 6t) rad/s, where t is in seconds. Thisgear is connected to gear B, which is fixedconnected to the shaft CD. The end of this shaft isc

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

*16-24. The gear A on the drive shaft of the outboard motor has a radius ra = 0.5 in. and the meshed pinion gear B on the propeller shaft has a radius rg = 1.2 in. Determine the angular velocity of the propeller in t = 1.5 s, if the drive shaft rotates with an angular acceleration a = (400) rad/s², where t is in seconds. The propeller is originally at rest and the motor frame does not move. 16-25. For the outboard motor in Prob. 16–24, determine the magnitude of the velocity and acceleration of point P located on the tip of the propeller at the instant t = 0.75 s. 2.20 in
Important problem. The motor produces a counterclockwise torque 1 N.m on the attached disk A. A Part of this torque is transferred to the disk C through the belt after amplification. The disk A has mass 0.5 kg. and the disk C has mass = 4.5 kg. Find: (50 m 5omm pully C I. The difference tension between the palley A Te belt parts (7- T). II. The angular acceleration of the disk С. The angular acceleration of disk A. The angular velocity of the disk C after 5 seconds from the motion start. The transferred torque to the disk C. III. IV. V.
$16-77 16-77. The planetary gear system is used in an automatic transmission for an automobile. By locking or releasing certain gears, it has the advantage of operating the car at different speeds. Consider the case where the ring gear R is held fixed, wR = 0, and the sun gear S is rotating at @R @s = 5 rad/s. Determine the angular velocity of each of the planet gears P and shaft A. WR R 20.000 32 C ws 40 mm st 80 mm 40 mm Prob. 16-77 A
The 110-kg wheel has a radius of gyration about its center O of ko = 220 mm, and radius r = 0.4 m. When the wheel is subjected to the constant couple moment M = 63 N•m, it starts rolling from rest. Determine the wheel's angular velocity W (in rad/s) after 6.0 seconds if the wheel has been rolling without slipping. Please pay attention: the numbers may change since they are randomized. Your answer must include 2 places after the decimal point. Take g = 9.81 m/s². T M Your Answer: Answer
Q/ Two Shafts,the axes of which intersect but ave inclined at 28 to each other, are Connected by aHo skes joint. If the driving Shaft has auniform Speed of loo r.pm.The driven Shaft Carries arotuting mass I5 kgrand radius of gyration 250 mm. Find the variation inspeed of the driven shaft and the accelerating torque on the driven Shaft for the position when the driven Shaft has turmed 45°from the position in which its fork end isin the pl ane Containing the two Shafts. Ans-(126.5 r-pim1277N.m).
16-74. The epicyclic gear train consists of the sun gear A which is in mesh with the planet gear B. This gear has an inner hub C which is fixed to B and in mesh with the fixed ring gear R. If the connecting link DE pinned to B and C is rotating at øpe = 18 rad/s about the pin at E, determine the angular velocities of the planet and sun gears. 100 mm 600 mm 200 mm @DE = 18 rad/s 300 mm
Slider 4 is moving downward at a speed of 14 = 2 m/s and with a downward acceleration of a = 0,25 m/s at the moment 0=60°. The slider is connected to a wheel of with a radius of R = 1.5 m with a rod of length L = 3 m. The wheel is rolling without slipping. VA ал C B VA OB R A) Sketch a diagram of the rod showing the location of its Instant Center at the moment shown. What is the distance, r from the instant center to to point A? A/IC' B) Using the rod's instant center, determine the angular speed of rod AB. C) Using a relative acceleration approach, determine the acceleration of point B.
t is in seconds. Determine the angular velocity of the gear at 1= 45, starting from rest. Gear rack B is fixed to the P-n) N horizontal plane, and the gear's radius of gyration about its mass center O is ko = 125 mm.
Q3) 16-45. Determine the velocity of rod R for any angle 6 of the cam C if the cam rotates with a constant angular velocity o. The pin connection at O does not cause an interference with the motion of A on C. C R
Q3) 16-45. Determine the velocity of rod R for any angle 6 of the cam C if the cam rotates with a constant angular velocity w. The pin connection at O does not cause an interference with the motion of A on C. C PR
*20-40. At the instant e = 60°, the construction lift is rotating about the z axis with an angular velocity of w, = 0.5 rad/s and an angular acceleration of ở = 0.25 rad/s? while the telescopic boom AB rotates about the pin at A with an angular velocity of wn = 0.25 rad/s and angular acceleration of on = 0.1 rad/s. Simultaneously, the boom is extending with a velocity of 1.5 ft/s, and it has an acceleration of 0.5 ft/s², both measured relative to the frame. Determine the velocity and acceleration of point B located at the end of the boom at this instant. 15 ft 2 ft
The rod AB has a mass of 36 kg and a length of 1.9m. The spring is unstretched when 0- 45°. The spring constant k is 226 N/m. B Find the angular velocity of rod AB at 0 - 0. if the rod is released from rest when 0. 45°. Give your answer with 2 decimals.