Exercises1- A rectangular beam reinforced with 4 o18 bars has h=650mm, bw=250mm andd'=30mm. Applied moment is 67 kN.mMaterials used are C25 and S220. Allowablecompressive stress and modulus of rupture for concrete are 10MPA and 2.3 N/mm2respectively. Allowable stress for steel is 140 MPa. Is this beam cracked oruncracked? Is this beam designed adequately to carry the applied moment safely?2- Does this beam have enough capacity to carry the applied moment? Also, calculate theposition of neutral axis. h=50cm, bw= 25 cm, and d'=3cm. C25 and S420 are used.(kı= 0.85; fod= 17 MPa; fya=365 MPa; E= 2X10°N/mm?)DL= 30 kN/mLL= 15 kN/m4Ф 225.3 m3- Calculate the moment carrying capacity of the beam shown? Choose the required steelreinforcement to carry this moment. d=470mm b= 270mm and d'=30mm.C20: Allowable stress=7MPAS420: Allowable stress=220 MPaA,n=15

Since you have asked multiple questions, we will solve the first question for you. If you want any…

1- A rectangular beam reinforced with 4 o18 bars has h=650mm, bw=250mm and d'=30mm. Applied moment is 67 kN.mMaterials used are C25 and S220. Allowable compressive stress and modulus of rupture for concrete are 10MPA and 2.3 N/mm2 respectively. Allowable stress for steel is 140 MPa. Is this beam cracked or uncracked? Is this beam designed adequately to carry the applied moment safely?

1- A rectangular beam reinforced with 4 o18 bars has h=650mm, bw=250mm and d'=30mm. Applied moment is 67 kN.mMaterials used are C25 and S220. Allowable compressive stress and modulus of rupture for concrete are 10MPA and 2.3 N/mm2 respectively. Allowable stress for steel is 140 MPa. Is this beam cracked or uncracked? Is this beam designed adequately to carry the applied moment safely?

Steel Design (Activate Learning with these NEW titles from Engineering!)

6th Edition

ISBN:9781337094740

Author:Segui, William T.

Publisher:Segui, William T.

Chapter9: Composite Construction

Section: Chapter Questions

Problem 9.1.3P

See similar textbooks

Similar questions

Question 8 1 p The rectangular doubly reinforcement stress concrete block with the arrangement of reinforcement of 2N28 bars on top and 3N28 bars on bottom. The modulus of elasticity are Ec=23,500MPa and Es = 200,000MPa. Dead load is 18KN/m and live load is 12KN/m. f'c = 25MPa 800 TE 730 N12 ligs (fsv.t-500MPa) Ast = 3N28 350 Span = 10m Figure 3 Calculate the concrete stresses in tension and compression of the reinforcement concrete beam shown in Figure 3. Compression concrete stress Choose ] Tension Concrete stress Choose]
The rectangular doubly reinforcement stress concrete block with the arrangement of reinforcement of 2N28 bars on top and 3N28 bars on bottom. The modulus of elasticity are Ec =23,500MPa and Es = 200,000MPa. Dead load is 18KN/m and live load is 12KN/m. f' = 25MPa 800 IDE 730 N12 ligs (fsv.f-500MPa) Ast = 3N28 350 Span = 10m Figure 3 Calculate the combination load for the reinforcement concrete beam shown in Figure 3. Unit: KN/m with two decimal. 1.2G+1.5Q=w
A rectangular beam has the dimensions (see Figure) b = 12 in, h= 20 in, and d= 17 in. and is reinforced with three No. 9 (No. 29) bars so that As - 3.00 in?. The concrete compressive strength fe is 4000 psi, and the tensile strength in bending (modulus of rupture) is 475 psi. The yield point of the steel f, is 60,000 psi. Determine the stress in the steel caused by a bending moment M = 10 ft-kips. 9 - 6.78 in, I- 4067 in, Es = 29000000, E - 3600000 L17 in. 20 in. 3 #9 bars (A, - 3.00 in.) 3 in. -12 in.- Select one: a. 2525 psi b. 2412 psi C. 2615 psi d. 2817 psi
Q-A pre-tensioned concrete member of section 200 mm x 250 mm contains tendons of area 500 mm² at centre of gravity of the section. The prestress in the tendons is 1000 N/mm². Assuming modular ratio as 10, find the stress (N/mm2) in concrete.
The rectangular doubly reinforcement stress concrete block with the arrangement of reinforcement of 2N28 bars on top and 3N28 bars on bottom. The modulus of elasticity are Ec =23,500MPa and Es = 200,000MPa. Dead load is 18KN/m and live load is 12KN/m. f'c = 25MPa 800 730 N12 ligs (fx.t-500MPa) Ast = 3N28 350 Span = 10m Figure 3 Use the Transformed section approach considering the presence of steel. Calculate the concrete area and transformed steel area in both tension and compression shown in Figure 3. n=Es/Ec Ast=1232mm^2 Use n-1 for the transformed area to do the calculate. Unit: mm^2 with two decimal
Determine the required tension steel area of the T beam with given properties below. Width of flange bf = 500 mm Width of web bw = 340 mm Thickness of flange tf = 140 mm Effective depth d = 350mm Effective concretee covering d' = 75mm Compressive strength of concrete fc' = 34.5 MPa Yield stress of steel bar fy = 375 MPa Mu = 415 kN-m As = _________ mm2
a) For the rectangular section shown below the maximum allowable tensile stress in the concrete Fct = 3MPa. Assume an uncracked section and find the maximum moment the section can resist as well as the stress in the reinforcement for this moment Ec:= 30-GPa Es:= 200 GPa b:= 300 mm h := 520 mm d:= 460 mm 2 As 1470 mm := b As
The T-beam shown in figure resulted from monolithic construction of the beam and slab. The effective flange width is 1100 mm and the uniform slab thickness is 120mm. Width of beam is 340 mm, total depth of the T-section is 590 mm. The centroid of steel is 70 mm from extreme concrete fiber. Concrete strength f’c= 21 MPa amd steel strength fy= 415 MPa. 1 Calculate the nominal strength of the beam for positive moment neglecting the contribution of the top reinforcement, KN-m A 428.55 B 503.20 C 355.96 D 637.52 2 Calculate the nominal strength of the beam for negative moment, KN-m A 289.88 B 275.53 C 311.67 D 325.48
Using the stress block, determine the ultimate moment of resistance of the section shown in Figure 2 and check whether the steei provided satisfies the bending moment due to the loads on the beam. Characteristic compressive strength of concrete, fck= 25 N/mm² Characteristic tensile strength of steel, fyk = 500 N/mm2 Clear cover to main steel as 20 mm. Ultimate Design Load =13 kN/m 2 402 mm 370 mm 2 1470 mm 9 m 230 mm Figure 2
A beam cast monolithically has the following properties: bf=1200mm, t or hf = 110mm, bw=380mm and h=800mm. It is reinforced with 10D32mm grade 420MPa bars. Concrete strength is assumed to be 27.5MPa and the centroid of tension reinforcement is located 665mm from the outermost compression fiber. A. Determine maximum nominal moment to ensure tension controlled, kN-m. B. Calculate the balanced steel area, mm2. C. Calculate the balanced moment in kN-m.
3. A reinforced rectangular concrete beam having a width of 300 mm, effective depth of500 mm, fc’ = 24 MPa, fy = 415 MPa, 4 - 28 mmɸ, d’ = 65 mm. Present the following (a) actual steel ratio (b) maximum steel ratio (c) a(d) c (e) check if steel yields (f) ?steel(g) type of failure (h) reduction factor (i) moment capacity
O Find the ultimate moment of resistance for the rectangular section reinforced as shown below. material strengths: Concrete Reinforcement Width of section Reinforcement fcu:= 30-MPa fy:= 450-MPa b:= 280-mm d:= 510-mm A, 2410-mm d':= 50-mm A's:= 628-mm² b A', d'